STI EZ-Path NEZ33R Bedienungsanleitung

INSTALLATION INSTRUCTIONS

Specified Technologies Inc.

Somerville, NJ 08876 USA

T: (800) 992-1180 • F: (908) 526-9623

www.stifirestop.com

Page 1 of 2

Warranty: www.stifirestop.com/legal/warranty

Made in USA • Printed in USA

ZIS1089 3059

Wrap outer (larger) pathway shell assemblies

around cables and align them. Attach them

together completely until there are audible

clicks.

x8x8

Cut gasket and wrap around outer shell

assembly ange.

Using the hardware supplied, drill

appropriate size hole and install anchors.

Slide outer shell towards wall, mark hole

locations and slide outer shell back.

Push outer shell towards the wall,

sandwiching the gasket.

Secure outer shell to the wall using

provided screws.

(Instructions continued on back)

Note: When installing NEZ33 the EZ-Path®logo needs to be facing you in the upright

position and the arrows should be pointing to the top and bottom of the device. For vertical

installations, horizontal supports should be installed.

Note: For more information on restop installation, refer to ASTM E3157.

Parts Included (Not to Scale)

Single Device Retrofit Device

(Part Number: NEZ33R)

INSTALLATION INSTRUCTIONS

Specified Technologies Inc.

Somerville, NJ 08876 USA

T: (800) 992-1180 • F: (908) 526-9623

www.stifirestop.com

Page 2 of 2

Warranty: www.stifirestop.com/legal/warranty

Made in USA • Printed in USA

ZIS1089 3059

Single Device Retrofit Device

(Part Number: NEZ33R)

Wrap inner (smaller) pathway shell

assemblies around cables and align them.

Attach them together completely until there

are audible clicks.

Cut gasket and wrap around inner shell

assembly ange.

Using the hardware supplied, drill appropriate

size hole and install anchors.

Slide inner shell towards wall (and into

the outer shell from the other side), mark

hole locations and slide inner shell back

Push inner shell towards the wall,

sandwiching the gasket.

Secure inner shell to the wall using

provided screws.

Note: When installing NEZ33 the EZ-Path®logo needs to be facing you in the upright

position and the arrows should be pointing to the top and bottom of the device. For vertical

installations, horizontal supports should be installed.

Note: For more information on restop installation, refer to ASTM E3157.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere STI Feuerlöschausrüstung Handbücher

STI

STI EZ-Path 44+ Series Bedienungsanleitung

Beliebte Feuerlöschausrüstung Handbücher anderer Marken

Tyco Fire Protection Products

Tyco Fire Protection Products AM31 AQUAMIST Nozzle Bedienungsanleitung

Task Force Tips

Task Force Tips Extend-A-Gun RC3 Betriebsanleitung

Autronica

Autronica AutroSafe BSD-321/EX Bedienungsanleitung

POK

POK Froggy Bedienungsanleitung

Waterous

Waterous AQUIS Series Handbuch

CTP

CTP NPO ETERNIS GUARANT-7 Stücklistenhandbuch

MSA

MSA M1 Bedienungsanleitung

Grundfos

Grundfos Hydro EN Betriebsanleitung

Amerex

Amerex 570 Anwendungshandbuch

Vimpex

Vimpex BIG HP18-H200-B1 Bedienungsanleitung

Global Fire Equipment

Global Fire Equipment GFE-PA-VOX-A Bedienungsanleitung

Chubb

Chubb PEFS F3 Bedienungsanleitung

Projoy Electric

Projoy Electric PEFS-PL Series Bedienungsanleitung

klimaoprema

klimaoprema FDC25 Series Bedienungsanleitung

Mueller

Mueller Revive M2 Bedienungsanleitung

SEI Industries

SEI Industries BAMBI MAX BBXHL4000PF Bedienungsanleitung

Waterax

Waterax MARK-3 Bedienungsanleitung

Tyco

Tyco 802SB Bedienungsanleitung