Stinger Heigh10 Bedienungsanleitung

HEIGH10 (UN1810) Installer Setup Guide

Accessing Installer Settings...............................................2

Installer Settings.................................................................3

Advanced Vehicle Settings.................................................3

Checking System Firmware Version.................................4

Updating Firmware............................................................5

SWC Settings ....................................................................8

Check/Update the HEIGH10 (UN1810) System Firmware:

Once installed and powered-up, the System Firmware needs to be up-to-date. Step-by-step

instructions for checking and updating the System Firmware can be found on Page 4 of this

Installer Set-Up Guide.

HEIGH10 User Guide:

The included User Guide Download postcard should be given to the end user, but you may want to

look over the User Guide to become familiar with all the user features and settings.

iGO Navigation (sold separately):

Be sure to insert an updated SE-P14 iGO Navigation card into the system before nalizing

installation. Visit: https://stingerelectronics.com/products/se-p14 for instruction on updating

the SE-P14 iGO navigation card.

Need Help?

If you have followed 1-4 above, and still have questions, reach out to our Technical Support Team:

Phone: 727-592-5991

Email: [email protected]

Chat: stingerelectronics.com

1Read the included Installation Guide:

The installation manual includes various installation methods, wiring diagrams

and species the correct hardware to use for the installation. Or, to view the

manual online, go to https://stingerelectronics.com/products/heigh10

Installers! Important Steps For Installation

This is a supplemental setup guide for the UN1810. This guide covers installer and system settings. Information

regarding the general operation, features and user settings of the HEIGH10 (UN1810) can be found in the User Guide.

ISG-UN1810 REV. 080822

SRK-JW18EH PAC Integration Kit

Jeep Wrangler JL | Gladiator JT

Accessing the Installer Settings

1. From any source, press the HOME Button

2. From the HOME MENU select Settings 3. Select System Settings

4. Select Installer Settings > Enter 5. Enter Passcode 0052 > OK

Installer Settings Advanced Vehicle Settings

FM Tuning Steps [100KH - 200KH]

Sets the FM radio tuning to 1 or 2 digit

increments. USA is 200KH and Europe

is 100KH.

System Information

Select to view current rmware revision.

(Page: 4)

Advanced Vehicle Settings

Select to access system dened vehicle

settings.

Amp Remote Out [PWR OFF - ACC]

PWR OFF: the Remote Turn On wire turns off

when the radio is turned off.

ACC: the Remote Turn On wire turns off when

accessory power is turned off. This is to keep

external equipment amps/DSP On if the vehicle

is equipped with parking sensor or other safety

equipment that produces safety chimes.

System Update

Select to update system rmware.

(Page: 5)

PAC Update

Select PAC Update to update the PAC APK

when an update is available.

Factory Reset

Resets radio to Vehicle Application maintaining

any updated version on Integration APK.

Master Reset

Resets radio to Universal Application wiping out

any updated version of Integration APK.

Steering Wheel Control

Select to program SWC when using the UN1810

analog steering wheel control inputs. (Page: 8)

Steering Wheel [Left - Right]

Denes how user interface will be congured,

mainly in Apple CarPlay.

Installer Setting > Advanced Vehicle Settings

SRK-JW18EH PAC Integration Kit

Jeep Wrangler JL | Gladiator JT

Checking System Firmware Version

1. Access the Installer Settings (Page: 2) and select

System Information to view rmware information.

2. Note the APP and System Versions and head over to the UN1810 product page on stingerelectronics.com.

Select the New Firmware Tab on the product page. The most current rmware will be listed with a date.

The 8 digits of the APP Version is the APP Version date code (YYYYMMDD). The 6 digits of the System

Version is the version date (YYMMDD). If the date code of either the APP or System rmware is older

than the current rmware on the website, proceed to Updating System Firmware.

Checking and updating the System Firmware and PAC Integration APK is an important step for

proper operation. This should be done rst before setting any system and vehicle settings as those

settings may be lost after an update.

Updating System Firmware

1. Format a USB Drive

Before copying the rmware le to a USB Flash Drive, the USB drive will need to be

formatted to FAT32 / MS-DOS(FAT)

USB Drive Format: Windows PC

A. Insert a 4GB+ USB Drive

D. Select FAT 32 File System and un-

check Quick Format and click Start.

B. Open File Explorer C. Right click on USB Drive & select

Format

USB Drive Format: Mac

A. Insert a 4GB+ USB Drive

D. Select MS-DOS(FAT) from the

format drop-down menu and click Erase

B. Launch the Disk Utility

App from the Utilities folder

C. Select the USB drive from the

“External” List and click Erase

SRK-JW18EH PAC Integration Kit

Jeep Wrangler JL | Gladiator JT

Updating System Firmware (cont.)

2. Download Firmware

Download the rmware le from StingerElectronics.com. Transfer the rmware le “as is” onto the formatted USB

drive. The le must be in the root directory of the USB drive. Do not unzip the le. See example A for Windows

and B for Mac.

A. Windows PC B. Mac

3. Install System Update

Insert the USB drive into either USB port on the radio.

NOTE: When updating the rmware, all settings will be reset to factory defaults.... station presets,

EQ presets, audio/crossover settings, time alignment, camera settings. If need be, record this

information before updating rmware.

A. Access the Installer Settings (Page: 2) and

select System Update > Update

The update will take 8-10 minutes.

Do not attempt to stop the update.

DO NOT turn off power. The system will be

damaged if power is lost during the

update process.

A. Access the Installer Settings (Page: 2) and

select System Update > Update

Updating System Firmware (cont.)

4. Factory Reset

When the update is complete and the display is on the Radio source, access the Installer Settings

(Page 2), and select Factory Reset > Reset. The reset process takes 1-2 minutes, when completed,

the unit will return to the Radio source.

5. Conrm Firmware Update

Conrm rmware update by following

the steps on page 4.

SRK-JW18EH PAC Integration Kit

Jeep Wrangler JL | Gladiator JT

Steering Wheel Control

Selecting Steering Wheel Control from Advanced

Vehicle Settings will access the SWC Settings.

The SWC Settings are used to program the

vehicles steering wheel controls when using the

UN1810 analog steering wheel control inputs.

NOTE: This does not need to be done when

using a SWC interface and the 3.5mm SWC

input on the UN1810. Refer to the SWC interface

intructions when using the 3.5mm SWC input.

Programming The Steering Wheel Controls:

1. On the SWC Settings page, select the desired

function by pressing the OK button.

The value will change from Unprogrammed to

Press Any Key

2. Press the desired button on the steering wheel.

The value will change to Programmed

Stinger is Power Brand of AAMP Global

15500 Lightwave, Clearwater, Florida 33760

Technical Support:

Phone: 727-592-5991

Email: [email protected]

Chat: stingerelectronics.com

ISG-UN1810 REV. 080522

Andere Handbücher für Heigh10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Stinger Auto-Videosystem Handbücher

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Stinger

Stinger SPXRNGDASH Bedienungsanleitung

Stinger

Stinger HEIGH10 UN1810E-FD5 Bedienungsanleitung

Stinger

Stinger HEIGH10 UN1810E-VW3 Bedienungsanleitung

Stinger

Stinger ELEV8 UN1880 Bedienungsanleitung

Stinger

Stinger HEIGH 10 Bedienungsanleitung

Stinger

Stinger VIP Bedienungsanleitung

Stinger

Stinger STH10TACOM Bedienungsanleitung

Stinger

Stinger HEIGH10 UN1810E-FT2 Bedienungsanleitung

Stinger

Stinger HEIGH10 UN1810E-FT3 Bedienungsanleitung

Stinger

Stinger HEIGH10 SRK-RAM13H Bedienungsanleitung

Stinger

Stinger HEIGH10 SRK-JW18EH Bedienungsanleitung

Stinger

Stinger Heigh10 Bedienungsanleitung

Stinger

Stinger VIP Bedienungsanleitung

Stinger

Stinger ELEV8 UN1880 Bedienungsanleitung

Stinger

Stinger HEIGH10 SRK-RAM13H Bedienungsanleitung

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Stinger

Stinger ELEV8 UN1880 Bedienungsanleitung

Stinger

Stinger HEIGH10 SRK-JK11H Bedienungsanleitung

Stinger

Stinger Heigh10 Bedienungsanleitung

Stinger

Stinger HEIGH10 UN1810E-AU1 Bedienungsanleitung

Stinger

Stinger Heigh10 Bedienungsanleitung

Stinger

Stinger Heigh10 Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Kia

Kia MTXM100YPPE Bedienungsanleitung

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung

DP Audio Video

DP Audio Video dbd807nav Bedienungsanleitung

auna

auna MVD-400 CP Bedienungsanleitung