Stratus MS9000XT Bedienungsanleitung

Save these instructions!

This equipment should not be installed, operated or repaired without first reading instructions.

Failure to follow the instructions and safety can result in serious injury or death.

Electricity should be hooked up by a certified electrician.

Do NOT use equipment beyond its rated capacity.

Keep manual near lift for reference

By proceeding with installation and operation, you agree that you fully understand the contents of

this manual and assume full responsibility for product use.

Only Operate this lift if it can be done so safely.

IMPORTANT NOTE:

8413 Calibration Ct.

College Station, Tx USA

Telephone:(512)640-9896

stratusautoequip.com

: MS9000XT

Manual SAEMSSERIES— Revision A1 — July2023

Models

SHOWN: MS9000X

Safety - Installation - Operation - Maintenance

Extra Wide Commercial Grade Open Center Mobile Mid Rise

Electric Safety Lock Release Scissor Vehicle Lift

Manual - MS9000XT- Extra Wide Commercial Grade Open Center Mobile Mid Rise Electric Safety

Lock Release Scissor Vehicle Lift - Safety - Installation - Operation - Maintenance -MSSERIES—

Revision A1 — July 2023

Copies may be made of this document if you agree full attribution to Stratus Metals Inc. Changes and

Copies for commercial purposes to this document are prohibited.

Trademarks- Stratus Auto Equipment and logo are registered trademarks of Stratus Metals, Inc. All

other company, product, and service names are used for identification only. All trademarks and

registered trademarks mentioned in this manual are the property of their respective owners.

Limitations- Whereas every effort has been made to ensure this manual has complete and accurate

information; Product updates, revisions, and/or changes could have occurred since this manual was

written and published. Stratus Auto Equipment reserves the right to change any information in this

manual without incurring any obligation for equipment previously or subsequently sold. Stratus Auto

Equipment is not responsible for typographical errors in this manual.

Safety- Your product was designed and manufactured with safety in mind. However, your safety also

depends on proper training and thoughtful operation. Do not install, operate, maintain, or repair the

unit without reading and understanding this manual and the labels on the unit; do not use your Lift

unless you can do so safely!

Owner Responsibility- In order to ensure operator safety and maintain your product properly, it is

the responsibility of the product owner to read and follow these instructions:

• Follow all setup, operation, and maintenance instructions.

• Make sure product setup and use conforms to all applicable local, state, and federal codes, rules,

and regulations, such as state and federal OSHA regulations and electrical codes.

• Read and follow all safety instructions. Keep them readily available for operators.

• Make sure all operators are properly trained, know how to safely operate the unit, and are properly

supervised.

• Do not operate the product until you are certain all parts are in place and operating correctly.

• Carefully inspect the product on a regular basis and perform all maintenance as specified.

• Service and maintain the unit only with approved replacement parts.

• Keep all instructions permanently with the product and make sure all labels are clean and visible.

Stratus Auto Equipment makes no promises, guarantees or assurances that our products meet any state, county, federal or

international mandated permit, license, code, standard, certification, or any other mandate other than what is listed or shown

on Stratus Auto Equipment's website. Not all of Stratus Auto Equipment lift models meet the standards as prescribed by

ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. Consult www.autolift.org for a complete list of lift models that meet

ANSI/ALI ALCTV-(current edition) or ANSI/UL 201 or contact support@stratusautoequip.com

Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard,

certification, or any other mandate required related to the installation and/or operation of any Stratus Equipment. Stratus will

not be responsible for any charges, fines, liens, or other levies imposed on the Buyer related to any special or regional

structural, seismic or any other building code and/or codes such as the Uniform Building Code (UBC), International Building

Code (IBC), or any other state, county, federal or international mandated permit, license, code, standard, certification, or

other mandate, law, rule, regulation or directive by any other agency, government, administrations, or corporations whether

state, county, federal, or international mandated.

Unit Information

Be sure to document

the Model Number,

Serial Number, and

Date of Manufacture

from the label on your

unit. This information

is required for part or

warranty issues.

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

Chapter 7

Chapter 8

Chapter 9

Chapter 10

Contents

Introduction

Symbols

Liability

Safety Instruction

Labels

FAQ

Warranty

Shipping

Returns

Parameters

Features

Components

Electrical

Checklist

Preparation

Installation

Operation

Troubleshooting

ALI

Exploded View

Chapter 11

Chapter 12

Chapter 13

Chapter 14

Chapter 15

Chapter 16

Chapter 17

Chapter 18

Chapter 19

Chapter 20

Introduction

This manual is designed to help customers use Stratus MS series scissor lifts.

These are mid rise, with an open center that provides full under vehicle access.

These lifts can be installed at ground level or flush mounted (in ground).

These lifts come with a capacity of 9000 Lbs.

Stratus does recommend keeping this manual within reach of the lift for anyone

who is to use or service the machine. Frequently asked questions and

Troubleshooting have been included within this manual. If you question and/or

issue which is not answered here, please contact us at 512-640-9896 or email

[email protected]

Calls attention to information that can help you use your product

better.

Following are the symbols used in this manual:

⚠

DANGER Calls attention to an immediate hazard that will result in injury or

death.

⚠

WARNING Calls attention to a hazard or unsafe practice that could result in

injury or death.

⚠

CAUTION Calls attention to a hazard or unsafe practice that could result in

minor personal injury, product, or property damage.

NOTICE Calls attention to a situation that, if not avoided, could result in

product or property damage.

Tip

Symbols

Stratus Auto Equipment assumes no liability for damages resulting from:

•Use of the product for purposes other than those described in this manual.

•Modifications to the equipment without prior, written permission from Stratus

•Injury or death caused by modifying, disabling, overriding, or removing safety

features.

•Damage to the equipment from external influences.

•Incorrect operation of the equipment.

Liability

Make sure that you have read the User’s Manual completely including relevant

instructions on installation, operation and safety before operating the lift.

This lift is designed for lifting vehicles. Any other use may result in damage of the

lift or injury to personnel.

Only those who have been properly trained should operate the lift. The vehicle

customer or inexperienced persons are prohibited from operating the lift at will.

Keep children and untrained personnel away from the Lift.

Do not overload the lift beyond its rated capacity. To reduce the risk of injury,

never attempt to lift more than the rated capacity. Refer to loading instructions.

The lift is designed to lift the entire body of vehicles with weight within the lifting

capacity.

If lift designed for indoor use only. Outdoor use is prohibited

Do not install lift on any surface other than concrete that is at least 6" thick and

has set for at least 30 days.

Do not move away from controls while lift is in motion.

Keep hands and feet away from any moving parts, Do not put hands at any

dangerous place, such as the space between tool arms.

Do not wear any loose clothing that could be caught in moving parts. Keep hair,

fingers, and all parts of body away from moving parts. Always wear appropriate

safety equipment during operation.

Keep area around lift clean to avoid incidents. Any oil stain or obstacle may pose

a safety risk.

Always ensure the safety latches are operational before any attempt to work

near or under the vehicle. Be sure to perform mechanical locking after the

vehicle is lifted. It is prohibited to work under the vehicle before mechanical

locking is performed.

Ensure regular maintenance is completed. If anything, abnormal occurs, stop

using lift and immediately contact us for help. Do not use the lift if any

abnormality is found.

Do not rock vehicle while on lift or remove heavy components that may cause

weight shift as vehicle could fall.

Safety Instructions

The warning, cautions and instructions discussed in this manual cannot cover

all possible conditions and situations that may occur. It must be understood by

the operator that common sense and caution are factors which cannot be built

into this product, but must be supplied by operator.

ALWAYS ensure the mechanical safety locks are engaged. Never remove safety

related components from the lift. Do not use if safety related components are

damaged or missing.

Failure to correctly install, operate, or any improper modifications could result

in injury or death of operators.

WARNING:

Do not modify any part of the lift without manufacturers advice. Do not make

any modifications to the Lift; this voids the warranty and increases the chances

of injury or property damage.

If lift is not in use, lower to the lowest position and disconnect power. Be sure to

cut off the power supply after the use of lift.

It is prohibited to lift the vehicle when someone is in the vehicle.

When a vehicle is being loaded onto or unloaded from the lift, no person is

allowed to stand in the vehicle passage.

Do not use the Lift while tired or under the influence of drugs, alcohol, or

medication.

Keep areas well lit.

Keep loads balanced on the Lift Platforms. Clear the area immediately if a

Vehicle is in danger of falling off the Lift. DO NOT ATTEMPT TO CATCH!

The rubber pad of the small scissor lift must have contact with the support point

of the vehicle, otherwise the vehicle chassis may be damaged. (It is

recommended to consult the vehicle manufacturer by telephone if the location

of the support point is not clear.)

Make sure there is no obstacle under the vehicle before lowering it

If the lift will be left unused for a long period of time, it is recommended that the

user disconnects power, empty the oil tank, and lubricate any moving parts with

hydraulic oil.

Attention: For environment protection, please dispose the disused oil in a proper way.

Safety Signs

Caution

Never stand, work or be

under the lift while it is

being operated

Caution

Operator should not

stand too close to lift but

in a safe position away

from moving parts

Warning

When the lift is lowered,

no auxiliary stand or

other blocking objects

should be near the lift

Warning

Do not shake or push

vehicle while it is on the lift

Warning

Only trained technicians

are permitted to operate

lift

Caution

Ensure feet and other

body parts are clear of lift

when lifting or lowering

Caution

Never try to lift or lower

only 1 platform

Warning

Do not change, tamper or

interfere with the safety

mechanisms of this lift

Warning

Ensure that the lifting

weight of the vehicle is

balanced on both

platforms to avoid tilting

or sliding

Warning

High voltage in control box,

use extreme caution

All safety warning labels are clearly depicted on the lift to ensure that the operator is

aware of and avoids the dangers of using the lift in an incorrect manner. The labels

must be kept clean and they have to be replaced if detached or damaged. Please

read carefully the meaning of each label and memorize them for future operation.

Labels

Keep feet clear of the lift

when lowering

Make sure the mechanical safety

has been locked before working

under the car

CAUTION

Only trained personnel is allowed to use the

lift.

Read the entire manual before operating

Never try to raize the vehicle exceding lift

capacity

Make sure you meet all safety requirements

before you start working under the vehicle

Surrounding of lift will remain clear when

raising or lowering

The manufacturer and distributor will not take

any responsibility if user does not follow the

operation manual that comes with the lift

Measurements

Inhaltsverzeichnis

Andere Stratus Hebesystem Handbücher

Stratus

Stratus SAE-C14X Leitfaden

Stratus

Stratus SAE-C10XE Leitfaden

Stratus

Stratus SAE-F14X Leitfaden

Stratus

Stratus SAE-P410 Bedienungsanleitung

Stratus

Stratus SAE-F12X Leitfaden

Stratus

Stratus SAE-C9P Leitfaden

Stratus

Stratus SAE-P48 Leitfaden

Stratus

Stratus SAE-C12XE Leitfaden

Stratus

Stratus SAE-UT9000 Leitfaden

Stratus

Stratus SAE-S66M Bedienungsanleitung

Stratus

Stratus SAE-P166M Leitfaden

Stratus

Stratus SAE-F10S Montageanleitung

Stratus

Stratus SAE-F10P Leitfaden

Stratus

Stratus SAE-C10P Leitfaden

Stratus

Stratus SAE-C10C Leitfaden

Stratus

Stratus SAE-UT8000 Leitfaden

Stratus

Stratus SAE-C12X Leitfaden

Beliebte Hebesystem Handbücher anderer Marken

morse

morse 82H-124 Bedienungsanleitung

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Genie

Genie Z-60/34 Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung