StreamLight Strion Bedienungsanleitung

STRION® SERIES

Operating Instructions

STRION®LED, STRION®DS, STRION®HPL,

STRION®DS HPL, STRION LED HL®and STRION®DS HL

Thank you for selecting the Strion

® LED, Strion® DS, Strion® HPL, Strion ® DS HPL,

Strion LED HL ® or Strion® DS HL. As with any fine tool, reasonable care and maintenance

of this product will provide years of dependable service.Please read this manual before

using your flashlight. It includes important safety and operating instructions and should

be saved. Flashlight must be fully charged before first use.

SAFETY WARNING: Use of light in “strobe” mode may cause seizure in persons

with photosensitive epilepsy.

CAUTION: The Strion® HPL, Strion ® DS HPL, Strion LED HL ® or Strion® DS HL

provide a powerful beam at the high setting. When operated for a long time, especially

if not handheld, it will get uncomfortably warm. This is NORMAL and is not a defect. Any

LED flashlight of similar size and performance will produce similar amounts of heat during

operation. The only way to reduce operating heat is to SIGNIFICANTLY lower the output,

or increase the size of the flashlight. While this heating may trigger the drop reflex if an

unattended hot light is picked up, the temperature does not present a burn hazard. When

used tactically for short periods of time to clear a room, check for intruders, etc., heating

will not be a problem. When using the light for extended periods of time, use of a lower

power setting, if the illumination level is appropriate, will prolong battery life and reduce

heat buildup.

A. While eye damage from the Strion

® products is unlikely, they are a Class 2 LED product.

Caution - LED Radiation (RG-2)

Do Not Stare Into Beam.

May be harmful to eyes.

Per IEC 62471 Ed 1.0:2006:07

B. The Strion

series flashlights are not approved for use in hazardous atmospheres.

C. SAVE THESE INSTRUCTIONS. This manual contains important safety, operating and

maintenance information for your flashlight and charger.

D. CAUTION: To reduce risk of fire, electrical shock, or personal injury, do not attempt to

use the charger to recharge any other product. Likewise, do not attempt to charge the

Strion

family of lights with any other charger.

E. Do not abuse the cord. Never carry the charger by the cord or yank the cord to

disconnect it from a receptacle. Do not use a damaged charger.

F. Plug the AC charger directly into an electrical outlet. Do not use an extension cord.

G. Do not put any metal objects onto the charging terminals located in the charge holder.

H. Do not try to repair the unit or charger yourself. Take it to a qualified service facility or

return it to the factory.

I. Use only battery #74175. The contact arrangement in the flashlight precludes the

use of other batteries. Recycle worn out or damaged batteries properly. Do not attempt

to incinerate the battery as it may explode in a fire. Handle the battery carefully and never

allow it to short circuit.

J. Use of this product for other than a lighting device is not recommended.

Streamlight specifically disclaims liability for other than recommended use.

K. CAUTION: To reduce risk of fire, electrical shock, or personal injury, handle the battery

carefully and never allow it to short circuit.

USING THE LIGHT

The Strion® LED, Strion® HPL and Strion LED HL ® feature a digital multifunction tail

mounted tactical switch. The Strion

® DS, Strion® DS HPL and Strion ® DS HL feature a

second, independent head-mounted push-button switch.

•Lightly press the pushbutton for momentary operation at full intensity.

•Fully press the pushbutton switch (until it clicks) once to turn the light on at full intensity.

•Fully press and hold the switch to cycle through brightness levels. Release at desired level.

•A quick double-click of the switch will activate the strobe function.

•A single full press of the switch from any “on” mode will turn the flashlight off.

ACCESSING OTHER PROGRAMS

The Strion

DS, Strion

DS HPL and Strion

DS HL feature a TEN-TAP

programmable

switch allowing the user to select one of three different programs. To change to the next

program, starting from the “Off” position, tap the momentary function of the switch rapidly

9 times (within 0.4 seconds per tap) and hold it down the 10th time. Continue holding the

switch until the light turns off (approximately 1 second), then release the switch.

Available programs are High-Medium-Low/strobe enabled (Factory Default),

High only/strobe disabled or High-Medium-Low/strobe disabled.

CHARGER FACTS

CHARGER MOUNTING

•The charger should never be mounted against any heat sensitive surface.

•The most secure mounting position is with the flashlight vertical and head up.

•Before drilling any holes, make sure there is room to insert and remove the flashlight.

• Two (2) self-tapping screws are included to mount the charger. The correct size hole for

these screws in sheet metal is 1/8.”

USB CHARGER

The USB charger/holder is equipped with dual power input ports. The overlapping design

prevents both the USB input and the 12VDC vehicle input to be connected at the same

time. An AC/USB power supply with custom USB cable is supplied to attach to the

charger/holder. Place the small micro-USB plug of the USB cable (SL logo up) into the USB

connector sleeve (marked with SL logo) that is located on the base of the charger/holder.

The micro-USB plug and connector on the charger base are keyed and contain a locking

feature and will “snap” into place. Connect the AC/USB power supply to a wall outlet. The

charger may also be connected to any other standard, powered USB outlet.

USB PIGGYBACK®CHARGER

The USB Piggyback charger features an integrated charger/holder for a spare battery.

Insert the dual contact end of the battery into the Piggyback sleeve toward LED indicator.

The red Piggyback LED functions in the same manner as the primary flashlight charger/

holder LED.

CHARGING

Fully charge your flashlight before first use. The flashlight may be stored in the charger

continuously when not in use. There is no danger of overcharge.

To charge the flashlight, first turn it off and insert it into the charger. The triangular plate

on the flashlight head fits into a mating recess in the charger. With the plate toward the

charger, slip the barrel of the light between the charger arms and pull downward until it

locks into place.

IMPORTANT: Maximum charging temperature range is 20°F to 115°F with optimal

temperature range between 50°F and 86°F. A safety circuit prevents charging outside the

maximum range and the red charge LED will flash rapidly. When temperature is within an

acceptable range charging will resume.

LED CHARGE INDICATOR(S)

The red LED on the charger housing (or Piggyback sleeve) must light to ensure

that the battery is being charged.

•Charging…LED is steady .

•Charged…LED pulses shortly ever y second.

• Error…LED pulses rapidly . This may be caused by out of range temperature or input voltage.

• It is normal for the indicator to switch between steady and blink as the battery is “topped off”.

Charge time is approximately 3 hours for the primary flashlight location and an additional

3 hours for the piggyback battery location (if equipped) when using the provided AC power

supply or 12VDC automotive cord. Charge time may be longer when connecting to other

powered USB outlets.

Before mounting a Streamlight charger in a vehicle, please read the following sections.

INSTALLATION IN VEHICLES

A 12VDC power cord (#22051) is equipped with a cigarette plug and is available for mount-

ing a Streamlight charger in a vehicle. The cigarette plug can be removed and the wires can

be attached directly to a power source for a more permanent installation. (A two amp fuse

must be used on the positive lead.) NOTE: USB input cord must be disconnected from the

charger/holder before attempting to plug in the 12VDC power cord to the charger holder.

IMPORTANT: Before making electrical connections in a vehicle, keep in mind that a

shorted auto battery can easily start a fire. Make all connections with insulated lugs or

other connectors intended for such use. Be sure that your installation is fused.

The striped power lead is positive and the unmarked lead is negative. When connecting

the charger to a fuse block, the striped, positive power lead goes to the connector that is

dead when the vehicle’s fuse is removed. The charger body is electrically isolated from the

charge circuit and allows positive ground installations. The charger is polarity protected,

and if connected in reverse polarity, simply won’t operate until connected properly.

Streamlight recommends connecting chargers to an unswitched source of power to ensure

the flashlight is always fully charged. If the vehicle will not be driven for several days, the

flashlight should be removed from the charger to avoid vehicle battery drain. Charging

the flashlight with the USB charger will draw between .4 -.6 amperes for up to 3 hours

during charging. Charging the flashlight and spare battery with the USB Piggyback charger

will draw between .5 - .7 amperes for up to 6 hours. Either charger will draw less than .1

amperes when in maintenance mode when battery(s) is fully charged.

BATTERY REPLACEMENT

Unscrew the tailcap and slide the battery from the flashlight. Replace the battery by

inserting the contact end first and reattach the tailcap.

MAINTENANCE

•Keep all threads and o-rings lubed with silicon grease.

• Keep tailcap to barrel connection clean. Loose or dirty tailcap will

cause the flashlight to malfunction.

• Keep flashlight charger contacts clean at all times. Poor contact can cause charger

malfunction. An abrasive pencil eraser works well to clean the contacts.

REPLACEMENT PART(S)

BATTERY P/N 74175

IMPORTANT – Be sure to use genuine Streamlight® replacement parts.

Learn more about work lights on our website.

Andere Handbücher für strion

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere StreamLight Taschenlampe Handbücher

StreamLight

StreamLight DUALIE 3AA Bedienungsanleitung

StreamLight

StreamLight DUALIE 2AA Bedienungsanleitung

StreamLight

StreamLight STYLUS PRO COB Bedienungsanleitung

StreamLight

StreamLight LITEBOX Bedienungsanleitung

StreamLight

StreamLight Stinger 75014 Bedienungsanleitung

StreamLight

StreamLight FIRE VULCAN Bedienungsanleitung

StreamLight

StreamLight LITEBOX Bedienungsanleitung

StreamLight

StreamLight Vintage Bedienungsanleitung

StreamLight

StreamLight STINGER 2020 Bedienungsanleitung

StreamLight

StreamLight PROPOLYMAX 4AA Bedienungsanleitung

StreamLight

StreamLight strion Bedienungsanleitung

StreamLight

StreamLight SURVIVOR Bedienungsanleitung

StreamLight

StreamLight VANTAGE II Bedienungsanleitung

StreamLight

StreamLight SL-20L Bedienungsanleitung

StreamLight

StreamLight RECHARGEABLES Flashlight Bedienungsanleitung

StreamLight

StreamLight PROPOLYMER 2AA Bedienungsanleitung

StreamLight

StreamLight Stinger LED HP Bedienungsanleitung

StreamLight

StreamLight Stylus Pro Reach Bedienungsanleitung

StreamLight

StreamLight PolyStinger LED Bedienungsanleitung

StreamLight

StreamLight LITEBOX Bedienungsanleitung

StreamLight

StreamLight PROTAC HL 5-X USB Bedienungsanleitung

StreamLight

StreamLight strion Bedienungsanleitung

StreamLight

StreamLight PolyTac 90 Bedienungsanleitung

StreamLight

StreamLight VANTAGE II Series Bedienungsanleitung

Beliebte Taschenlampe Handbücher anderer Marken

Silverline

Silverline 994024 Bedienungsanleitung

Gama Sonic

Gama Sonic 23i60065 Bedienungsanleitung

Ryobi

Ryobi RFL180M Bedienungsanleitung

RIB

RIB SPARK ACG7061 Bedienungsanleitung

Abicor Binzel

Abicor Binzel MB EVO PRO Series Bedienungsanleitung

PELI

PELI 7610 Bedienungsanleitung

Black & Decker

Black & Decker FSL18 Bedienungsanleitung

Black & Decker

Black & Decker 9506 Bedienungsanleitung

Berner

Berner 341709 Bedienungsanleitung

PELI

PELI 3415 Zone 0 Bedienungsanleitung

ADC

ADC Adlite Pro Wartungshandbuch

Fervi

Fervi 0338 Bedienungsanleitung

Milwaukee

Milwaukee M18 IL Bedienungsanleitung

Spectronics

Spectronics Spectroline LeakTracker SPI-LT Bedienungsanleitung

Larson Electronics

Larson Electronics SLEDB-110V-M Bedienungsanleitung

vulta

vulta hurricane 262 lumen fg-e15 Bedienungsanleitung

FALCON EYE

FALCON EYE FBR0112 Bedienungsanleitung

Heider

Heider CFX Super Power Bedienungsanleitung