A. Charge with Solar Charging Cable
1. Place your solar panel somewhere that it can receivedirect sunlight and abundant sunshine.
2. Make sure that the open-circuit voltage of the solar panel falls within 14-40V. The maximum
input power of this product is 60W.
3. Connect the solar panel and the product using solar charging cable. Make sure that the solar
charging cable is correctly connected, forming a solid contact with the input port of the
product.
4. The product comes with a built-in advanced control circuit. When the battery is fully charged, it
will stop charging itself automatically.
B. Charge with AC Adapter
To charge the product with AC adapter, insert one end of the adapter into wall outlet and insert
the other end to the input port of the product. When the product is being charged, you can
monitor the battery status by checking the battery icon on the LCD screen. The product comes
with a built-in advanced control circuit. When the battery is fully charged, it will stop charging
itself automatically.
C. Charge with Car Charger (not included)
Insert one end of the car charger to the car cigarette lighter receptacle and insert the other end to
the input port of the product. The battery icon will blink to indicate that the product is being
charged normally.
Note:
• You cannot fully charge the product when the car charger is connected to a 12V car battery,
but you can fully charge it when the car charger is connected to a 24V car battery.
• It is best to charge while your car engine is started.
• Q & A
Q1: How to check charging status?
The battery icon indicates the battery level of this product. The battery level is displayed in5
segments. Each segment indicates 20% of the battery capacity. When battery is being charged,
the icon would flash. When the battery is fully charged, the icon would stop flashing and all5
segmentswill be filled.
Q2: How to charge other electronic devices?
1. You need to know the working efficiency of your electronic devices. You can check the user
manual of your electronic device or search online for such information.
2. You need to check the power at each output port. For example, the power at AC output port is
provided by the built-in inverter of the product, whose maximum rated output power is 120W.
This means that if the power of connected electronic device is over 120W for a long period, the
inverter will shut down output.
Q3: What is Depth of Discharge (DOD)?
To prolong battery life, we set the DOD of this portable power generator to 90%, which means
only 90% of the battery capacity (200Wh) can be discharged. 10% of the energy is reserved so
that the battery will not be damaged due to over-discharge.
EN-5
