Subaru 2017 Legacy Bedienungsanleitung

2017 Quick Reference Guide

◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.

Remote keyless entry system

Remote

transmitter key

(if equipped)

Access key

(if equipped)

Lock/Unlock doors

PANIC

BASIC OPERATION

*Grip the driver’s door handle to unlock the

driver’s door. Grip the front passenger’s door

handle to unlock all doors.

All doors will be locked/unlocked by the following procedures carrying the access key on

your person. (The driver should always carry the access key.)

For detailed operating and safety information, please refer to

your Owner’s Manual.

Keyless access function (if equipped)

Opening trunk:

Side door (front door handles only):

1All doors will be locked.

2The driver’s door will be unlocked.

(To unlock all doors, briey press the button

a second time within 5 seconds.)

3Press and hold to open the trunk.

4The horn will sound and the hazard warning

ashes will ash.

Lock

Unlock*

Door lock sensor

Grip

Touch

Press

Ignition switch must be in ACC or ON position.

1Select side to adjust

2To adjust the mirror, move the switch in the

direction of your desired position.

Adjust each component

1Forward and backward adjustment

2Seat cushion angle adjustment

3Seat height adjustment

4Seatback angle (reclining) adjustment

5Lumber support adjustment (if equipped)

1Forward and backward adjustment

2Seat cushion height adjustment

(Driver's seat only)

3Seatback reclining adjustment

Power seat (Driver’s seat-if equipped):

Manual seat (if equipped):

Front seat

Tilt/telescopic steering wheel

Remote control mirror switch

1Adjust the seat position and pull the tilt/

telescopic lock lever down.

2Move the steering wheel to the desired level.

3Pull the lever up to lock the steering wheel in

place.

Make sure that the steering wheel is securely

locked by moving it up and down, and forward and

backward.

1 2

◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.

Start/Stop engine

To start engine:

STEP1: Carry the access key, and sit in the driver’s seat.

STEP2: Apply the parking brake.

STEP3: Shift the select lever in the Pposition.

STEP4: Depress the brake pedal until the indicator on

the push-button ignition switch turns green.

STEP5: While depressing the brake pedal, press the

push-button ignition switch.

To stop engine:

STEP1: Stop the vehicle completely.

STEP2: Move the select lever to the Pposition.

STEP3: Press the push-button ignition switch.

Every time the button is pressed without depressing the brake pedal, the power is switched

in the sequence of OFF➞ACC➞ON➞OFF.

OFF ( Turned off) ACC (Orange) ON (Orange)

Change of the power supply (Without starting engine)

The key can be turned from ACC to LOCK

only when the key is pushed in while turning

it (all models) and the select lever is in the P

position (CVT models).

Push-button ignition switch (if equipped)

Electronic parking brake switch Ignition switch (if equipped)

*The design may be slightly different from the illustration

depending on the models.

Operation

indicator

Apply

Release

You must raise the slider and hold it in that position

before you can move the shift lever to the R position.

To change gears, fully depress the clutch pedal, move

the shift lever, and gradually let up on the clutch pedal.

Shift paddle:

Gearshifts can be performed using the shift paddle

behind the steering wheel.

Operate Select lever/Shift lever

M = Manual mode:

With the vehicle either moving or stationary, move the

select lever from the D position to the M position to

select the manual mode.

Continuously variable transmission (if equipped)

Manual transmission (if equipped)

With the brake pedal depressed, shift while

pressing the button in

Shift while pressing the button in

Shift without pressing the button

Select lever button

Downshift Upshift

◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.

MAIN PARTS AND OPERATION

1Headlights

2 Headlightasher,High/Lowbeamchange(dimmer)

3Turn signal

4Front fog lights (if equipped)

To turn on the front fog lights, rotate dial to .

Front fog lights operate only when headlight switch is in...

- position.

- AUTO position and the headlights are on.

Headlight switch/Turn signal lever/Front fog light switch (if equipped)

Models without EyeSight system Models with EyeSight system

A CL

H I

F D

The high beam assist function automatically changes

the headlight from high beam to low beam (or vice versa).

The high beam assist function is activated when:

1. The light control switch is in the AUTO position and

the low beam headlights are on automatically.

2.The turn signal lever is pushed forward.

When the high beam assist

function is activated, the indicator

(green) on the combination meter

will illuminate.

High beam assist function (if equipped)

High beam assist

indicator

1Windshield wiper

To operate the wiper, rotate knob to;

: Mist (for a single wipe)

: Off

: Intermittent

: Low speed

: High speed

2Wiper intermittent time control

3Windshield washer

Wiper and washer switch

To turn on the hazard warning asher, press the button.

Use the hazard warning asher when you have to park

in emergency conditions.

 Hazardwarningasherswitch

Turn the dial to adjust the illumination brightness of the

instrument panel.

When the control dial is turned fully upward to

position, the illumination brightness becomes the

maximum and the automatic dimming function does not

work at all.

Illumination brightness control dial

*The design may be slightly different from the

illustration depending on the models.

◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.

1Defroster button:

Press the button to defrost the windshield.

2Rear window defogger button:

Press the button to turn on rear window defogger,

outside mirror defogger and windshield wiper deicer

(if equipped). The function will automatically shut off

after approximately 15 minutes.

*The illustration of the print is Type A.

Defroster button/Rear window defogger button

Hood release knob

1Lock switch

2For driver’s window

3For front passenger’s window

4For rear left passenger’s window

5For rear right passenger’s window

Power window switches

Trunk lid opener switch

1 2

Pull

Press and hold the

switch for more than

1 second.

To unlock all doors

To lock all doors

Power door locking switch

Seat heater (if equipped)

Front seat heater switch

1HIGH mode indicator

2MID mode indicator

3LOW mode indicator

Audio control buttons

These buttons allow the driver to control audio functions

without taking his/her hands off the steering wheel.

 Fuelllerlidreleaselever

This indicates that the fuel ller door (lid) is

located on the right side of the vehicle.

Pull Right side

Driver’s side Front passenger’s

side

◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.

Located on the edge of each rear door.

When the lever is in the LOCK position, the rear door

cannot be opened from the inside.

Deactivate the Hill Holder function when:

• Towing a trailer

• Carrying a heavy load

• When you do not frequently stop your vehicle on an

uphill slope using the parking brake.

1To lower:

Push the upper part of the anchor and slide it down.

2To raise:

Slide the anchor up.

Tilting Sliding

Moonroof switch (if equipped)

1Raise

2Lower

1Open

2Close

Child safety locks

Hill Holder switch

Front seat shoulder belt anchor height

*The design may be slightly different from the

illustration depending on the models.

Activate/

Deactivate

Andere Handbücher für 2017 Legacy

Inhaltsverzeichnis

Andere Subaru Automobil Handbücher

Subaru

Subaru 2003 Legacy Bedienungsanleitung

Subaru

Subaru 2003 Legacy Bedienungsanleitung

Subaru

Subaru CROSSTREK 2020 Bedienungsanleitung

Subaru

Subaru Crosstrek Hybrid 2019 Bedienungsanleitung

Subaru

Subaru 2008 IMPREZA WRX Bedienungsanleitung

Subaru

Subaru 2009 Forester Bedienungsanleitung

Subaru

Subaru 2001 Forester Bedienungsanleitung

Subaru

Subaru 2000 Legacy Bedienungsanleitung

Subaru

Subaru Impreza 2016 Bedienungsanleitung

Subaru

Subaru Outback 2022 Bedienungsanleitung

Subaru

Subaru Legacy AWD Bedienungsanleitung

Subaru

Subaru 2013 Forester Bedienungsanleitung

Subaru

Subaru Tribeca 2010 Bedienungsanleitung

Subaru

Subaru 2006 Legacy Bedienungsanleitung

Subaru

Subaru 2007 B9 Tribeca Bedienungsanleitung

Subaru

Subaru 2014 Legacy Bedienungsanleitung

Subaru

Subaru WRX 2021 Bedienungsanleitung

Subaru

Subaru 2011 Forester Bedienungsanleitung

Subaru

Subaru 2016 Outback Bedienungsanleitung

Subaru

Subaru 2001 Forester Bedienungsanleitung

Subaru

Subaru WRX 2019 Bedienungsanleitung

Subaru

Subaru 2003 Legacy Bedienungsanleitung

Subaru

Subaru Legacy 2021 Bedienungsanleitung

Subaru

Subaru Impreza 2004 Bedienungsanleitung

Beliebte Automobil Handbücher anderer Marken

Toyota

Toyota 2000 Tundra Bedienungsanleitung

CITROËN

CITROËN DS4 DSign Bedienungsanleitung

Lexus

Lexus 2015 CT 200h Bedienungsanleitung

Cadillac

Cadillac CTS 2008 Bedienungsanleitung

Mercedes-Benz

Mercedes-Benz M-class ML 55 AMG Bedienungsanleitung

Porsche

Porsche Boxster S Bedienungsanleitung

GMC

GMC 2010 Savana 1500 Cargo Bedienungsanleitung

KIAM

KIAM SPORTAGE 2014 Stücklistenhandbuch

GMC

GMC 2013 Terrain Montageanleitung

GMC

GMC T-Series 1999 Bedienungsanleitung

Mercury

Mercury 1998 Mystique Bedienungsanleitung

Mercury

Mercury 2007 Mariner Bedienungsanleitung

Mazda

Mazda 2007 Mazdaspeed 3 Leitfaden

Mazda

Mazda 2014 CX-5 Bedienungsanleitung

GMC

GMC Chevrolet Express 2022 Bedienungsanleitung

GMC

GMC 1997 Jimmy Bedienungsanleitung

Chevrolet

Chevrolet 2012 Malibu Bedienungsanleitung

Cadillac

Cadillac 2010 Escalade Bedienungsanleitung