Summer 28630 Bedienungsanleitung

STRANGULATION HAZARD - Children have

STRANGLED in cords. Keep this cord out of reach

of children (more than 3 feet (0.9 m) away from the

crib). Use enclosed Security Clips to help secure cord away

from baby’s reach. Never use extension cords with AC

Adapters. Only use the AC Adapters provided.

WARNING:

BABY ZOOM™ WIFI

VIDEO MONITOR & INTERNET

VIEWING SYSTEM

INSTRUCTION MANUAL

Please read the

following instructions

and warnings carefully.

Keep this instruction manual

for future reference.

Tools required for wall mount:

screwdriver and drill (not included)

For technical support see back page.

Adult use only.

WARNING:

Adult assembly required.

Keep small parts away from

children when assembling

28630

System Requirements: You need a broadband Internet connection

(cable/DSL) with recommended upload speed of 300 bps and a wireless

router or a cable/DSL modem. You must have a smartphone or tablet with

Android 2.3.4. or higher or Apple iOS 5.0 or higher for setup.

WARNING:

THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.

•STRANGULATION HAZARD - Children have STRANGLED in cords. Keep this

cord out of reach of children (more than 3 feet (0.9 m) away from the

crib). Use enclosed security clips to help secure cord away from baby’s

reach. Never use extension cords with AC adapters. Only use the AC

adapters provided.

•When an AC adapter is plugged into an electrical outlet, do not touch the

exposed end.

•Test monitor before first use, periodically, and when changing location of

the camera.

•Do not use monitor near water (such as bathtub, sink, etc.).

•Keep monitor away from heat sources (such as stoves, radiators, etc.).

• Make sure there is proper ventilation around all monitor components. Do

not place on sofas, cushions, beds, etc. which may block ventilation.

• This product is not a toy. Do not allow children to play with it.

• This product contains small parts. Adult assembly required.

Exercise care when unpacking and assembling the product.

BATTERY WARNING:

• Use only the original rechargeable battery provided. Please contact

Summer Infant, Inc. for replacement battery. Contact information can be

found at the end of these instructions or on the battery itself.

• Clean battery and product contacts prior to battery installation.

• Do not short-circuit supply terminals.

• Only the recommended battery or equivalent are to be used, volts and

size.

• Remove battery when product is stored for long periods of time or when

battery is exhausted.

• Dispose of exhausted battery properly.

• Keep all batteries away from children.

components:

features (monitor):

hardware:

x6x1x1

Camera

Monitor AC Adapters (2)

features (camera):

Temperature

Sensor

Power On LED

Nighttime

LEDs

Internet

Status Lights

Microphone

Camera

Lens

front back

Video On/Off

Code

Button

Power

On/Off

Internet Status

Lights On/Off

AC Adapter

Jack

Sound

Lights

Power/

Talk

Back

Pan/

Scan/

Control

Brightness

Up/Down

Zoom/Select

AC Adapter Jack Microphone Battery Compartment

Belt Clip/

Kickstand

Volume

Up/Down

For more information, troubleshooting, and FAQs, visit:

www.summerinfant.com/summerwifi/helpcenter

2a2b

Open your Summer

Link WiFi APP and follow

the instructions on screen

to complete signup.

Connect your device (phone or tablet) to your

home WiFi Network and download the free APP for

your Apple®or Android™ phone or tablet.

SEARCH FOR:

“SUMMER LINK

WIFI”

iPhone®, iPod®, iPad® iOS 5.0

or higher required

Android™ phone or tablet Android

2.3.4 or higher required

AT&T

12:34PM

Welcome

to the

App store.

Welcome

to the

Google

Play™

store.

Existing User

Locate the QR code on

the bottom of your

camera to complete

setup. Note: No QR code

scanner required!

3Power on the camera.

The four green LEDs will

circle while configuring to

your home WiFi network

NOTE: Ensure in-home

handheld monitor is NOT

powered “on”.

Follow steps on screen

to complete activation

and you’re ready to start

viewing your little one!

setting up a camera for the first time:

MAC :

5M:E6:FC:DC:F2:DA

KEY :

0000000000

Before using the handheld monitor, charge the battery for 4-5

hours. To set up the system, you will need two adults. One adult

should view the picture on the monitor while the other is in the

nursery to adjust the camera. Often the quality of the reception

can be improved by slightly repositioning the camera or the

monitor. It may help to place an object in the crib to simulate the

position and size of your baby.

Step 1: Press and hold POWER/MENU button on handheld

monitor unit for 4-seconds until the Summer logo appears on

screen. Video should immediately appear on screen. If

video does not appear, go to “pairing the monitor and camera”

section (page 7). If video appears, the initial set up is complete

and you can install camera.

in-home handheld setup:

plug into

AC adapter jack

turn on

camera setup (table top):

Determine a

location for the

camera that will

provide the best

view of your baby in

the crib. Place the

camera on a flat

surface, such as a

dresser, bureau or

shelf. NEVER place

camera or cords

within 3 feet of the

crib.

IMPORTANT

least

3ft.

plug into

wall outlet

2 3

Be sure to test reception

and camera positioning.For camera wall-mount

option, refer to pg 7.

plug into

wall outlet

camera setup (wall mount option):

1/4”

Pre-drill a hole in the

wall using 3/16", 4.8mm,

drill bit. (drill bit and

drill not included)

Tighten screw until only 1/4"

(6.2mm) of the screw is

exposed.

(screwdriver not included)

Determine a location to mount

the camera to the wall that will

provide the best view of your

baby in the crib. NEVER place

camera or cords within 3 feet of

the crib.

STRANGULATION HAZARD - Children have

STRANGLED in cords. Keep this cord out of

reach of children (more than 3 feet (0.9 m)

away from the crib). Use enclosed Security

Clips to help secure cord away from baby’s

reach. Never use extension cords with AC

Adapters. Only use the AC Adapters provided.

WARNING:

plug in to

AC adapter jack

least

3ft.

Secure the cord to the wall

using the 6 security clips

included to keep cord away

from baby's reach.

IMPORTANT

Be sure to test reception

and camera positioning.

turn on

IMPORTANT

pairing monitor and camera:

The monitor and camera are paired at the factory for privacy

reasons. If the monitor and camera are not pairing with each

other for any reason, follow steps to re-pair:

in-home handheld monitor features:

• Temperature Monitoring:

Monitoring the temperature in baby’s

room is easy with the option to display it on screen and helps

parents know baby is comfortable. Switch between Fahrenheit

and Celsius by pressing and holding the Video On/Off button

for 4-seconds.

• Video On-Off Button:

This button turns the video on and off.

Audio and sound lights continue to function normally. It is ideal

for a quick view of baby in the middle of the night. To monitor

in audio only mode, simply press the Video On/Off button to

turn the video screen off.

• Power Save Mode:

While operating the handheld unit on

battery power, the video screen will go to sleep, to conserve

battery power. Audio and sound lights continue to function

normally. With one-touch of the Video On/Off button, video

resumes on screen.

• Adjustable Volume & Brightness:

Volume adjustments allow

higher volume settings to hear every little sound while lower

volume settings monitor the louder sounds from baby. Adjust

the volume using the up and down arrow buttons on the side of

the monitor. Easily increase and decrease the brightness on

your monitor screen by pressing the menu button and then

pressing the up and down arrows on the front of the monitor to

accommodate the level of light in the room.

• Sound Lights:

The video monitor lets you not only hear your

baby but with sound lights parents can “see” when sound is

coming from baby’s room. Displayed on a color bar above the

video screen, the color changes from green to amber to red as

the sound level increases. These lights can be especially

helpful for parents when they are in crowded or noisy rooms.

1. Move the monitor to the same area as the camera and

make sure both are turned on.

2. Press the POWER/MENU button to call up the OPTION menu.

3. Using the up and down arrows on the front of the monitor, scroll

to “ ” and press ZOOM/SELECT

4. The next available channel will be highlighted. Press

ZOOM/SELECT again to begin pairing.

5. Within 20-seconds, press the CODE button on the back of the

camera and live video will appear once the camera is paired.

If this is unsuccessful, repeat steps above making sure the

camera and monitor are close enough to each other for pairing.

Note: The SCAN, DEL CAM, ADD CAM, and VIEW CAM menu

options are only used with additional cameras. (See page 13 for

more info on adding cameras to the system.)

camera features:

• Pan/Scan:

Keeping baby in view is important as they get more

mobile and curious. Parents can use the pan and scan feature

to adjust the camera view by pressing the up, down, left, and

right arrows on the front of the in-home handheld.

• Multi-Level Zoom:

Multi-level zoom enables increasing levels

of a zoomed-in image on screen. This provides parents with

much closer views on screen than one-level zoom, with the

option to view from 1 to 3 times closer. Press the icon on the

front of the in-home handheld to zoom in and out.

•Two-Way Communication:

Calm baby with the sound of your

voice with talk-back. Parents speak into the handheld unit or

their smart device and their voice is projected through the

camera. It’s reassuring for parents to be able to talk to or

soothe a crying baby. It’s also a convenient tool for parents,

making communication easy if one of them needs a reminder

to bring something from one room to another. Press and hold

the Talk Button on the side of the in-home handheld unit while

talking.

• Night Vision:

Rest assured knowing you can see your baby day

and night with automatic night vision. The system

automatically adjusts to the level of light in the room to keep

your baby in view in low light and dark room conditions,

making it easy to continue monitoring overnight. Night vision

video is displayed in black and white.

• Internet Status Lights:

The lights on the front of the camera will

tell you the status of your camera’s connection to an internet

source (see page 9 for more details). To toggle lights on and

off, use the switch located on the back of your camera.

Local Internet Connection Only

Two green LEDs (north and south

position) and two white LEDs (east

and west position) indicates a

local internet connection. This

means that you can view on your

smartphone, tablet, or computer in

your home but you will not be able

to view out of your home. You will

need to re-configure your camera’s

connection to resolve this issue.

Someone’s Watching Light

When all of the green LEDs on the

front of your camera switch from

green to white, this means that a

user you have given access to has

logged in and begun viewing your

camera from a remote internet

connection. The LEDs will change

back to green when they have

stopped watching.

Remote Internet & Local Internet

Connection

Four solid green LEDs indicates your

camera has a local and remote

internet connection. This means

you can view on your smartphone,

tablet, or computer in and out of

your home.

internet status lights:

Visit www.summerinfant.com/summerwifi/helpcenter

to help troubleshoot.

Requires app upgrade package, see

“upgrading your app” section.

Note: You can turn off the lights on the front of the camera by

sliding the Internet Status Light switch on back of camera.

smartphone & tablet features:

Logout

Home

screen

Status

bar

Press Snapshot to take a picture of your baby at

anytime while watching live video. Snapshots will

be securely stored on your phone or tablet.

Press Record to record video of your baby at

anytime while watching live video. Videos will be

securely stored on your phone or tablet.

Press Talk to communicate directly with your baby

through your smartphone or tablet.

Press Splitscreen to view multiple cameras at the

same time. This feature requires you to add an

additional camera to your system. For more

details see “Add a Link WiFi Camera” section on

page 13.

Press Settings to manage your account

information, add or manage cameras in your

system, get help, manage notifications, or find out

more information about the APP.

Press the up and down arrows and the left and

right arrows to move the camera and change view

on screen. Tap the screen to make arrows appear

or disappear.

Pinch the screen to zoom in on the image on live

viewing screen.

When someone is viewing remotely this icon will

appear in status bar. Remote viewing is anyone

you’ve shared access with, viewing on a network

other than your home network.

Temperature reading from camera will display in

the status bar. To switch between Farenheit and

Celcius enter settings menu.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Summer Babyphone Handbücher

Summer

Summer 28980 Bedienungsanleitung

Summer

Summer 29340 Sharpsight Bedienungsanleitung

Summer

Summer SURE SIGHT 2.0 Bedienungsanleitung

Summer

Summer 28450 Bedienungsanleitung

Summer

Summer 29640 Bedienungsanleitung

Summer

Summer 29030 Bedienungsanleitung

Summer

Summer 28970 Bedienungsanleitung

Summer

Summer 28840 Bedienungsanleitung

Summer

Summer Close2You 02700 Bedienungsanleitung

Summer

Summer 2480 Bedienungsanleitung

Summer

Summer Baby Pixel Cadet Bedienungsanleitung

Summer

Summer Baby Zoom Bedienungsanleitung

Summer

Summer BABY PIXEL ZOOM HD Bedienungsanleitung

Summer

Summer Secure Sight Bedienungsanleitung

Summer

Summer 28130 Bedienungsanleitung

Summer

Summer 29350 Bedienungsanleitung

Summer

Summer 29020 Bedienungsanleitung

Summer

Summer PictureMe Bedienungsanleitung

Summer

Summer SHARPVIEW 29430 Bedienungsanleitung

Summer

Summer 2230 Bedienungsanleitung

Summer

Summer 2641 Bedienungsanleitung

Summer

Summer 02480 Bedienungsanleitung

Summer

Summer 28490 Bedienungsanleitung

Summer

Summer Sleek & Secure 28270 Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Philips

Philips SCD 469 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

Philips

Philips AVENT SCD841 Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Philips

Philips SBC SC364 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Ivation

Ivation Wireless Monitoring System Bedienungsanleitung