Summit GC2BGL Bedienungsanleitung

BUILT-IN CERAMIC GAS COOKTOPS

Models GC2BGL

GC424BGL

Instruction Manual

Dear Customer,

Thank you for buying one of our ceramic gas cooktops. We are sure

that this modern, functional and practical appliance, made using the

finest quality materials, will fully satisfy your requirements.

This new appliance is very easy to use, but in order to obtain the best

results, we strongly recommend that you read this booklet carefully

before use. The manufacturer cannot be considered responsible for

any damages to people or things in the event of incorrect installation or

improper use of this appliance.

We reserve the right to make any changes to our products which we

consider to be necessary or useful, also in the interest of the user,

without affecting the essential characteristics in terms of functionality

and safety.

The staff of

Felix Storch, Inc.

Summit Appliance Division

770 Garrison Avenue

Bronx, New York 10474

www.summitappliance.com

TABLE OF CONTENTS

Important Safeguards .................................................................... 2

Location of Parts ............................................................................ 3

Installation ................................................................................. 4 - 7

Installing the Cooktop .............................................................. 4

Sealing the Cooktop ................................................................ 5

Room Ventilation ..................................................................... 5

Gas Connection ...................................................................... 6

Electrical Connection .......................................................... 6 - 7

Adjustments ................................................................................... 8

Conversions ................................................................................... 9

Using the Cooktop ................................................................ 10 - 11

Lighting the Burners .............................................................. 10

Proper Use of the Burners .............................................. 10 - 11

Cleaning ................................................................................. 12 - 13

Servicing ....................................................................................... 14

Replacing Components

Limited Warranty .......................................................................... 15

IMPORTANT SAFEGUARDS

•

This product must be installed in conformity with local codes or, in absence of

local codes, with the National Fuel Gas Code, ASNI Z223.1/NFPA 54.

•

The product must be electrically grounded in accordance with local codes or,

in the absence of local codes, with the National Electrical Code, ANSI/NFPA

70.

•

The appliance and its individual shutoff valve must be disconnected from the

gas supply piping system during any pressure testing of that system at test

pressure in excess of 1/2 psi (3.5 kPa). The maximum gas supply pressure is

7 inch WC (water column) for natural gas and 11 inch WC for LP. The gas

pressure regulator provided is regulated to 1 inch WC above the manufacturer's

specified manifold pressure.

•

Always disconnect the electrical supply before servicing the appliance.

WARNING:If the information in this manual is not followed exactly, a fire or

explosion could result causing property damage, physical injury or death.

•

Do not store or use gasoline or other flammable vapors and liquids in the

vicinity of this or any other appliance.

•

What to do if you smell gas:



Do not try to turn on any appliance.



Do not touch any electrical switch. Do not use any phone in your building.



Immediately call your gas supplier from a neighbor's phone. Follow the

gas supplier's instructions.



If you cannot reach your gas supplier, call the fire department.

•

Installation and service must be performed by a qualified installer, service

agency or the gas supplier.

•

Save any nozzles removed from the appliance for future use.

•

The maximum depth of cabinets installed above the cooktop should be 13

inches (330 mm).

•

Keep the appliance clear and free from combustible materials, gasoline and

other flammable vapors and liquids.

•

Do not obstruct the flow of gas or block any air vents.

LOCATION OF PARTS

Part No. Description Heat supplied

2 Fast burner 8350 Btu/h

3 Semi-fast burner, front 4350 Btu/h

4 Semi-fast burner, back 4350 Btu/h

5 Auxiliary burner 3400 Btu/h

7 Grate

9 Burner no. 2 control knob

10 Burner no. 5 control knob

11 Burner no. 4 control knob

12 Burner no. 3 control knob

NOTICE: This appliance has been manufactured for residential use only.

INSTALLATION

Installation, adjustment of controls and maintenance must only be carried

out by qualified personnel.

Incorrect installation may cause damage to persons, animals or property

for which the Manufacturer will not be considered responsible. During the

life of the system, the automatic safety or regulating devices on the

appliance may only be modified by the manufacturer or by his duly

authorized dealer.

Installing the Cooktop

Check that the appliance is in good condition after having removed the outer

packaging and internal wrappings from around the various loose parts. In case

of doubt, do not use the appliance and contact qualified personnel.

Never leave packaging materials (cardboard, bags, Styrofoam, nails, etc.)

within the reach of children since these items could become sources of

danger.

The measurements of the opening made in the top of the modular cabinet and

into which the cooktop will be installed are indicated in Fig. 1 and the following

chart. Always comply with the measurements given for the hole into which the

appliance will be recessed (see Figs. 1 and 2).

Use These Dimensions (in inches)

Model No. A B C D E

GC2BGL 11¼ 19⅛2¼ 2¼ 2⅞

GC424BGL

21¾ 18⅝2½ 2½ 2⅞

30"

Min.

Fig. 1 Fig. 2

Sealing the Cooktop

The cooktop has a special seal that prevents liquid from getting into the cabinet

below. Follow these instructions exactly in order to apply this seal correctly:

Detach the seals from their backing, checking that the transparent protection still

adheres to the seal itself.

Turn the cooktop over and correctly position seal "E" (Fig. 3) under the edge of

the cooktop itself so that the outer side of the seal perfectly matches the outer

edge of the cooktop. The ends of the strips must fit together without overlapping.

Once the seals are securely and evenly fixed to the cooktop, press them into

place with the fingers and remove the strip of protective paper from the seal. Set

the plate into the hole made in the cabinet.

Attach brackets "G" to the bottom of the cooktop with screws "F" until each

bracket contacts the underside of the cabinet (Fig. 4). In fastening the brackets,

do not use a mechanical or electric screwdriver. Instead, use a hand-operated

screwdriver and exert only moderate force.

The adjacent walls (left, right or behind) that exceed the cooktop in height must

be at a minimum distance from the cut hole as indicated in Fig. 1 and the chart

on the preceding page.

In order to avoid accidentally touching the hot cooktop bottom, it is necessary to

put a horizontal wooden insert, attached by screws, at a minimum distance of 6"

below the lower surface of the cooktop (see Fig. 1).

Room Ventilation

To ensure proper operation of the appliance, be sure that the room where it is

installed has adequate ventilation.

Fig. 3 Fig. 4

Gas Connection

Natural Gas and Propane Gas

Natural gas installations require the connection of a gas regulator to the cooktop.

You will find this regulator among the accessories supplied with the appliance.

Assemble the regulator (noting the direction of gas flow) and transition pieces

(supplied) in accordance with the figure below.

The transition piece on the supply side of the regulator must be provided by the

installer. Unions compatible with the hose fittings must be used and connections

tested for gas leaks.

Be sure that the supply connection point is accessible with the appliance

installed.

WARNING: Be sure the hose assembly is restrained from accidental contact with

the flue or flue outlet of an under-counter oven.

Electrical Connection

The electrical connections of the appliance must be carried out in compliance

with local standards and provisions.

Before connecting the appliance, check that:

1. The electrical capacity of the main electrical supply and current sockets suit

the maximum power rating of the appliance. (See the data label attached to

the bottom of the cooktop.)

2. The socket or system has an efficient ground connection in compliance with

local standards and provisions. The manufacturer is not responsible for failure

to comply with these provisions.

When the appliance is connected to electrical power by a socket:

•

Fit a standard plug suited to the load indicated on the data label to the cable.

•

Fit the wires following Fig. 5, noting the following correspondences:

Letter L (live) = wire

Letter N (neutral) = wire

Ground symbol = green or yellow-green wire

•

Never use adapters or shunts for connection since these could create false

contacts and lead to dangerous overheating.

•

The outlet must be accessible after the cooktop is built in.

When the appliance is connected directly to the electrical main:

•

Install an omnipolar circuit-breaker between the appliance and the electrical

main. This circuit-breaker should be sized in compliance with local installation

regulations.

•

Remember that the ground wire must not be interrupted by the circuit-breaker.

•

For optimum safety, the electrical connection may also be protected by a high-

sensitivity differential circuit-breaker.

You are strongly advised to fix the yellow-green ground wire to an efficient

grounding system

Fig. 5

ADJUSTMENTS

Always disconnect the appliance from the electrical power source before

making any adjustments. All seals must be replaced by the technician

when any adjustments are completed.

Taps

"Reduced rate" adjustment:

1. Switch on the burner and turn the corresponding knob to the "Reduced rate"

position (small flame icon, Fig. 8, page 10).

2. Remove knob "M" (Fig. 6), which is simply pressed onto its support rod.

3. Insert a small screwdriver "D" into hole "C" (Fig. 6) and turn the throttle screw

to the right or left until the burner flame has been adequately regulated to the

"Reduced rate" position.

Check that the flame does not go out when the knob is sharply switched from the

"Full on" to the "Reduced rate" position.

It is understood that only burners operating with Natural Gas or City Gas

should be subjected to the above-mentioned adjustments. The screw must

be fully locked when the burners operate with Propane (turn clockwise).

The operations described above can be carried out easily, whatever the position

of the cooktop or however it is fastened to the work surface.

THE BURNERS DO NOT REQUIRE ANY REGULATION OF INCOMING AIR.

Fig. 6

CONVERSIONS

Replacing Nozzles

The burners can be adapted to suit different

types of gas by fitting the nozzles that corres-

pond to the gas used. To do this, it is

necessary to remove the burner heads and

use a straight key "B", to unscrew the nozzle

"A" (see Fig. 7) and replace it with a nozzle

corresponding to the gas used.

Be sure the nozzle is seated tightly.

After making these replacements, the technician must regulate the burners

as described in Adjustments on the previous page and apply the label

corresponding to the new gas type in place of that previously applied. This

label is contained in the spare nozzle bag.

For ease of the fitter, we have prepared a table indicating the flow capacities, the

heat capacities of the burners, the diameter of the nozzles and the working

pressure for the various types of gas.

Burners

Gas

Normal

Pressure,

inches water

column

Injector

Diameter,

1/100 mm

Nominal Heat

Input (Btu/h)

No. Description Min. Max.

2 Rapid Propane HD-5

Natural Gas

145

2400

8350

3 Semirapid Propane HD-5

Natural Gas

100

2050

1700

4350

4 Semirapid Propane HD-5

Natural Gas

100

2050

1700

4350

5 Auxiliary Propane HD-5

Natural Gas

1200

1400

3400

Arrangement

of Burners

Fig. 7

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Summit Kochfeld Handbücher

Summit

Summit CR1115 Bedienungsanleitung

Summit

Summit CR4SS24 Bedienungsanleitung

Summit

Summit CR4B240BL Bedienungsanleitung

Summit

Summit CR2110 Bedienungsanleitung

Summit

Summit CR2B23T3B Bedienungsanleitung

Summit

Summit CR427 Series Bedienungsanleitung

Summit

Summit CR2B12ST Bedienungsanleitung

Summit

Summit CR2115 Bedienungsanleitung

Summit

Summit CR2B120WH Bedienungsanleitung

Summit

Summit SINC424220 Bedienungsanleitung

Summit

Summit CR2220 Bedienungsanleitung

Summit

Summit CSD2B115 Bedienungsanleitung

Summit

Summit GCJ1SSLP Bedienungsanleitung

Summit

Summit CR424WH Bedienungsanleitung

Summit

Summit SINC1110 Bedienungsanleitung

Summit

Summit CR2B22ST Bedienungsanleitung

Summit

Summit SINC4302R220 Leitfaden

Summit

Summit CR2B120 Bedienungsanleitung

Summit

Summit B49511 Bedienungsanleitung

Summit

Summit SINC2B120 Bedienungsanleitung

Summit

Summit SINC2220 Bedienungsanleitung

Summit

Summit SINC430220 Leitfaden

Summit

Summit CR2110B Bedienungsanleitung

Summit

Summit CR2B121 Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Bonnet

Bonnet OPTIMUM 700 Betriebsanleitung

Jenn-Air

Jenn-Air JGCP430 Bedienungsanleitung

Frigidaire

Frigidaire FES367FCC Kurzanleitung

Ztove

Ztove EZ2 DUO Bedienungsanleitung

Kleenmaid

Kleenmaid cooking GCTK9011 Installationsanleitung

Casselin

Casselin CSASRE24 Bedienungsanleitung

Jenn-Air

Jenn-Air JGC2536EB00 Bedienungsanleitung

Waldorf

Waldorf RN8603E-B Bedienungsanleitung

Whirlpool

Whirlpool SMP658CNEIXL Bedienungsanleitung

Wolf

Wolf CI243C/B Bedienungsanleitung

Fulgor Milano

Fulgor Milano F5PGK305S1 Bedienungsanleitung

GE JP389 Bedienungsanleitung

Wells

Wells WV-2HFG Bedienungsanleitung

IKEA

IKEA Lagan HGA4K Bedienungsanleitung

Samsung

Samsung NA36N9755 Bedienungsanleitung

Miele

Miele KM 404 Bedienungsanleitung

Lacor

Lacor 69562 Technisches Datenblatt

Keating Of Chicago

Keating Of Chicago MG-2 Bedienungsanleitung