Summit CL65ROS Bedienungsanleitung

Owner’s Manual

Outdoor Models

CL65ROS : Refrigerator

CL63FDOS : Wine Cooler & Beverage Center

BEFORE USE, PLEASE READ AND FOLLOW

ALL SAFETY RULES AND OPERATING INSTRUCTIONS

Write the Serial Number here:

Felix Storch, Inc.

Summit Appliance Division

770 Garrison Avenue

Bronx, NY 10474

www.summitappliance.com

Table of contents

Safety instruction and warnings ...........................................................................2 - 3

Transporting and unpacking ......................................................................................4

Installation instructions ..........................................................................................5 -7

Before installation of your appliance ...................................................................5

Tools you will need .............................................................................................5

Built-in installation dimensions ............................................................................6

Replacing cabinet legs with casters ....................................................................7

Electrical connection ...........................................................................................7

Reversing the door (model CL65ROS only) ..............................................................8

Operation .................................................................................................................9-10

Operating conditions ...........................................................................................9

Control elements .................................................................................................9

Setting the temperature .......................................................................................9

Functions ..........................................................................................................10

Defrosting ..........................................................................................................10

Shelves .............................................................................................................10

Beverage storage (model CL65ROS).........................................................................11

Wine and beverage storage (model CL63FDOS) .....................................................11

Cleaning and care ......................................................................................................12

Cleaning the appliance ......................................................................................12

Moving ..............................................................................................................12

Energy-saving tips ............................................................................................12

Problems with your appliance? ................................................................................13

Limited Warranty ..................................................................................................14-15

Note on Models CL65ROS &CL63FDOS

These appliances can be used both indoors and

outdoors, and may be installed either built into an

enclosure or free-standing. In any case, to ensure

proper operation and avoid unnecessary wasting

of energy, leave enough clearance around the unit

when installing to allow air to circulate freely.

For details on proper installation, see pages 5-6 .

Safety instructions and warnings

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Before the appliance is used, it must be properly positioned and installed as described in this manual.

Therefore, please read the manual carefully. To reduce the risk of fire, electric shock or injury when using the

appliance, follow basic precautions, including the following:

To prevent injury or damage to the

appliance, the appliance should be

unpacked and set up by two people.

In the event that the appliance is

damaged on delivery, contact the supplier

immediately before connecting to the

power line.

To guarantee safe operation, ensure that

the appliance is set up and connected as

described in these operating instructions.

Disconnect the appliance from the power

source if any fault occurs. Pull out the plug,

switch off or remove the fuse.

When disconnecting the appliance, pull on

the plug, not on the cable.

Any repairs and work on the appliance

should only be carried out by the

customer service department, as

unauthorized work could prove highly

dangerous for the user. The same applies

to changing the power cable.

Do not stand on the base, drawers or

doors or use them to support anything

else.

Do not allow flames or sources of ignition

to enter the appliance. When transporting

and cleaning the appliance, ensure that

the refrigerant circuit is not damaged. In

the event of damage, make sure that

there are no ignition sources nearby.

Keep the room well ventilated.

This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities or

lack of experience and knowledge unless

they have been given initial supervision or

instruction concerning use of the

appliance by a person responsible for

their safety. Children should be

supervised to ensure that they do not play

with the appliance.

Do not store explosives or sprays using

combustible propellants such as butane,

propane, pentane, etc. in the appliance.

Electrical components might cause

leaking gas to ignite. You may identify

such sprays by the printed contents

or a flame symbol.

Do not use any electrical devices inside

the appliance.

Before you throw away your old appliance:

Take off the door. Leave the shelves or

drawers in place so that children may not

easily climb inside.

When disposing of your appliance, please

choose an authorized disposal site.

Safety instructions and warnings

Children in the household

DANGER, RISK OF CHILD ENTRAPMENT!

Before you throw away your old appliances:

Take off the door. Leave the shelves in place

so that children may not easily climb inside.

Never leave packaging materials with

children. There is a danger of poisoning or

suffocation by the cardboard boxes and

plastic sheets!

This appliance is in no way a toy for

children!

If you will no longer be using the

appliance, remove the doors and gasket

seals and store in a safe place. In this way

you will avoid the danger of children

becoming trapped inside the appliance.

Never allow children to operate, play with,

or crawl inside the appliance.

Child entrapment and suffocation are not

problems of the past. Junked or

abandoned appliances are still

dangerous ... even if they will “just sit in

the garage a few days”.

Grounding instructions

This appliance must be grounded.

If the power socket of the home system is

not grounded in accordance with the

current legal regulations, connect the

appliance to the grounding lead itself after

consulting a specialized technician.

Do not use an extension cord with this

appliance

This appliance is equipped with a power

cord having a grounding wire with a

grounding plug. The plug must be plugged

into an outlet that is properly installed and

grounded.

Consult a qualified electrician or service

technician if the grounding instructions are

not completely understood, or if doubt

exists as to whether the appliance is

properly grounded.

If the outlet is a standard 2-prong wall

outlet, it is your personal responsibility

and obligation to have it replaced with a

properly grounded 3-prong wall outlet.

For best operation, plug this appliance

into its own electrical outlet to prevent

flickering of lights, blowing of fuse or

tripping of circuit breaker.

Do not under any circumstances cut or

remove the third (ground) prong from the

power cord.

Do not use an adapter plug with this

appliance.

Transporting and unpacking

If the appliance is transported in a

horizontal position, the oil from the

compressor may leak into the cooling

circuit. For this reason, allow the

appliance to rest in a vertical position for

12 hours before turning it on, so that the

oil flows back into the compressor.

Remove the external packaging, remove

the protective plastic film from the surface

of the appliance (if used) and clean the

external parts of the appliance with a

cleaner designed for this purpose. Do not

use steel wool or any coarse agents,

which could irreparably damage the

surface of the appliance. Carefully remove

all papers and adhesive tape from the

appliance, doors and other parts packed

in polystyrene. Remove documents and

accessories from inside the appliance.

The packaging material is recyclable and

is marked with a recycling symbol. For

disposal, follow the local regulations.

Packaging materials (plastic bags,

polystyrene parts, etc.) present a possible

source of danger and must be kept out of

the reach of children.

Carefully inspect the appliance. If you

discover any faults, stop the installation

and contact the vendor.

Installation instructions

Before installation of your appliance

The placement of the appliance must meet

the requirements in the section Operating

conditions on page 9 and must include a

stable floor with a load-bearing capacity

corresponding to the weight of the

appliance.

Level the appliance using the adjustable

feet. Ensure there is a gap between the

bottom edge of the appliance and the

ground, so that there is sufficient circulation

of air. This will ensure the optimal

performance of the cooling system.

Check whether any coolant circulation

pipes have been damaged during

installation.

Use the appliance only for the purposes for

which it has been designed.

The appliance must be located on a rigid

and even surface. In this way you will

ensure free circulation of the coolant and

effective operation of your appliance.

If possible, place the appliance in a cool,

well-ventilated and dry area.

Do not locate the appliance in direct

sunlight or in a room with a high ambient

temperature, or in the vicinity of any

sources of direct heat, such as a radiator or

oven. This would cause the compressor to

work harder, resulting in a substantially

higher power consumption level.

FOR YOUR SAFETY

While performing installations described in this section, gloves, safety glasses or

goggles should be worn.

Tools you will need

NOTE: For free standing installation, allow at least 4” of clearance at the back, sides

and top of the unit to permit the proper air circulation to cool the compressor and

condenser. Even for built-in installation, you should provide the following clearances

to ensure the best operation and proper ventilation: 3/16” on both sides, 2” at the

rear and 1/16” at the top. Take care that the air vent at the front of the appliance is

never covered or blocked in any way.

Installation instructions

Built-in installation dimensions (mm/in)

If your appliance is to be built-in, use the dimensions in the diagram and chart below as a guide

when installing:

Model

CL65ROS

CL63FDOS

660mm (26″)

610mm (24″)

883mm (34 ¾ ″)

152mm (6″)

51mm (2″)

Installation instructions

Notes:

Unplug the power cord and release the

brake before moving the cabinet.

Do not put any goods on top of the cabinet

and avoid slanting the cabinet when

moving it.

Push the cabinet from the rear making

sure the door does not open.

To avoid short circuits, please do not use

the cabinet in bad weather. Position the

cabinet under a canopy.

Do not let children climb on the cabinet or

move the cabinet to another location.

Keep the caster brake in “ON” position

while in desired location.

Cabinet must be placed on a level surface.

Cabinet will reach its cooling efficiency

after one hour.

Replacing cabinet legs with casters

a) Tilt the unit on its back on a level surface

and remove the 4 cabinet legs (Fig. 3

number 4).

Reserve the cabinet legs.

b) Assemble the casters with brake (Fig. 2)

on the cabinet front bottom and the other 2

casters (Fig. 1) at the cabinet rear bottom.

c) Assemble each caster to the bottom of the

unit with (2) M5x10 screws with a star or

Phillips screwdriver (Fig. 3).

d) The caster brake (Fig. 3 number 1) at the

front bottom of the cabinet comes with a

braking function. When the brake handle

is “ON” (Fig. 2)’unit wont roll; when brake

handle is “OFF” (released), it will roll.(Fig. 2)

Electrical connection

A 115 Volt (AC only) 60 Hz grounded

electrical supply equipped with a 15- or 20-

amp fuse or circuit breaker is required. It is

recommended that a separate circuit serving

only your appliance be provided. Use outlets

that cannot be turned off by a switch or pull

chain. Connect this appliance to a 3-prong

power supply outlet that has a ground

terminal. If you only have a 2-prong outlet,

have it replaced by a qualified technician

with an outlet that meets the local codes. DO

NOT USE AN EXTENSION CORD.

Required nominal voltage and frequency are

indicated on the rating plate. The connection

to the power supply and grounding has to be

made according to current standards and

regulations.

Model CL65ROS has a reversible door but is delivered to you with a right-hinged door. Should

you wish to reverse the hinge on your unit, a left-hand hinge kit is included in the box.

Reversing the door(model CL65ROS only)

Disconnect power before removing

doors

Remove the decorative nails (8) from the

top left of the cabinet and install the

spare top hinge (Left) (7) at top left of the

cabinet with 3 screws.

Install the door once correctly aligned.

Take out the 3 hinge screws from the top

right hinge (4) and remove it.

Open the door to a 90 degree angle,take

out the 2 screws from lower door axis (2),

remove the door (3)and the axis plate from

the door.

Operation

Operating conditions

Proper operation of the appliance is

guaranteed only if the following conditions

are met:

The temperature in the room where the

appliance is located conforms to the

climate class stated on the appliance’s

rating label.

Maximum ambient relative humidity:

RH75%.

The appliance must be placed at a

sufficient distance from heat sources ( e.g.,

ovens, central heating, direct sunlight,

etc.).

The appliance must be located in such a

place that it is protected against the

effects of weather.

Regular maintenance is performed

according to the instructions in this user’s

manual.

The ventilation openings in the cover of

the appliance must not be covered by

anything.

Correct installation ( e.g., leveling, the

capacity of the system corresponds to the

specifications on the rating label of the

appliance).

Control elements

For Models : CL65ROS/CL63FDOS

1) “ ” button

To turn the unit ON and OFF, press and hold

this button for approximately 3 seconds.

2) “ ” button

Energy conservation button: Pressing this

button for 3 seconds will turn the energy

conservation mode on or off. In this mode, the

LED light and display will turn off, and the

C/F light will be on.

3) “ “ indicator light

Shows that the compressor is in operation.

4) “°C/°F” indicator light

The temperature scale is changed by

pressing the C/F button.

5) “ ”button

Used to increase (warm) the temperature in

steps of 1F (or 1C).

6) “ ” button

Used to decrease (cool) the temperature in

steps of 1F (or 1C).

7) “°C/°F”button

Press this button to switch the indicator light

between C and F.

8) LED display

Shows the temperature of the internal cabinet.

Setting the temperature

Insert the power plug into a properly grounded

power socket.

Use the / buttons to set the desired

temperature of the appliance. Each time the

/ buttons are pressed, the temperature

will increase / decrease by 1F (or 1C).

CL65ROS

You can set the temperature in the range of

36° F to 50° F (or 2° C to 10° C).

CL63FDOS

You can set the temperature in the range of

39° F to 64° F (or 4° C to 18° C).

3 4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Summit Kühlschrank Handbücher

Summit

Summit SUM-P01061 Bedienungsanleitung

Summit

Summit FF7LBL Leitfaden

Summit

Summit SPR7OSST Series Bedienungsanleitung

Summit

Summit FF61BI Bedienungsanleitung

Summit

Summit FFBF235PL Bedienungsanleitung

Summit

Summit FFAR25L7 Bedienungsanleitung

Summit

Summit FFBF192SS Bedienungsanleitung

Summit

Summit FF-874 Series Bedienungsanleitung

Summit

Summit CTR21W Bedienungsanleitung

Summit

Summit FF1843BCSSADA Bedienungsanleitung

Summit

Summit Accucold FF7LBIVAC Bedienungsanleitung

Summit

Summit CP34W Bedienungsanleitung

Summit

Summit BAR77S Bedienungsanleitung

Summit

Summit FF6SSTB Leitfaden

Summit

Summit CM405 Bedienungsanleitung

Summit

Summit FF471WBI/FC Bedienungsanleitung

Summit

Summit FF1843BKS Bedienungsanleitung

Summit

Summit S19L Bedienungsanleitung

Summit

Summit FF7L-BLSSTB Leitfaden

Summit

Summit BDR190NACSSHH Leitfaden

Summit

Summit FF7LBLSSHH Leitfaden

Summit

Summit FF1513SS Bedienungsanleitung

Summit

Summit FF511L Bedienungsanleitung

Summit

Summit FFAR2L Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung