Summit SCUR 18 Bedienungsanleitung

felix Storch, fnc.

770 Gatrison llvenue

Bronx, NY 10474

FcuR rglzolzs

If you need service or call with a question, have this

inforrnation ready. We advise you to keep this Owners

Manual in your possession.

MODEI.:

SERI"ETNUMBER:

Summit Frost Free Refrigerator

Table of Gontents

Refrigerator Safety

Safety Instructions

Proper Disposal of Your Old Freezer

f nstallation Instructions

I(ey Eject Lock

Location Requirements

.H,djusting the Door

Refrigerator Use

Digital Therrnostat Instructions

Refrigerator Care

Cleaning your frost-free refrigerator

Base Grill

Changing the light buib

Loss of Power

Moving Care

Troubleshooting

Sen¡ice and \tr/arranty

Page 2

Page 3

Page 4

Page 5

Page 6

Page 6-8

Page 8-10

Page t l-12

D.H,TE OF PURGH]ISE:

REf RIGER.H,TOR S.ã,FETY

Your safety and the safety of others are very important to us.

We have provided many important safety messages in this manual

and on your appliance. Älways read and obey all safety messages.

You can be killed or seriously injured if you don't follow instructions'

Ätl safety messages will tell you what the potential hazard is, tell you

how to reduce the chance of injury, and tell you what can happen if

the instructions are not followed.

IIVIPORTITNT S.ã.FETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when

using your refrigerator, follow these basic precautions:

. Plug into a grounded 3 prong outlet.

. Do not remove ground prong.

. Do not use an adapter.

. Do not use an extension cord.

. Disconnect power before servicing.

. Ä-fter servicing, replace all parts and panels before operating.

. Use nonflammable cleaner.

. Keep flammable materials and vapors, such as gasoline, away from

refrigerator.

. Use two or more people to move and install refrigerator.

. Remove doors or lid from your old refrigerator.

[suFFo cÄ,TIoN IIAZ.åRD]

Proper Disposal of Your Old Refrigerator

Suffocation Hazard

Remove doors from your old refrigerator.

Ireave shelves in place.

INSTÃ,LL.6,TION INSTRUGTIONS

.Excessjye We ight Haz ar d

Use two oÍ mote people to move and install refrigerator,

Failure to do so can result in back or other iniury,

1. Remove Packaging Materials

2. Remove tape and glue residue from surfaces before turning on the

refrigerator. Rub a small amount of liquid dish soap over the adhesive

with your fingers. Wipe with warm water and dry.

3. Do not use sharp instruments, rubbing alcohol, flammable fluids, or

abrasive cleaners to remove tape or glue. These products can damage

the surface of your refrigerator. For more information, see 'Refrigetator

Safety. "

4. When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or

service, be sure to protect the floor. Älways pull the refrigerator straight

out when moving it. Do not wiggle or "walk" the refrigerator when try-

ing to move it, because floor damage can occur.

5. Clean Before Using

Äfter you remove all of the packaging materials, clean the inside of your

refrigerator before using it. See the cleaning instructions in

"Refrigerator Care,"

I{ey Eject Lock

To lock or unlock the refrigerator, you must hold the key in the lock

while turning. The lock is spring loaded, so the key cannot be left in the

lock.

If the key is lost, contact your dealer for a repiacement. Älways give the

model and serial number of your freezer when requesting a replace-

ment key.

LOCITTION REOUIREMENTS

Explosíon Hazard

Keep llatnmahle matefials and vapots' suclr as gasolìne' away

from refrìgetatot'

FaÍIuretodosocantesultíndeath,explosÍon'otfìre'

IMPORT.ANT: Do not install the refrigerator near an oven' radiator' or

other heat souïce' nor in a location where the temperature will fall

below 40'F (5'C).

Check the strength of the floor before installing your refrigerator' It

shouldhotdtheweigtrtofafullyloadedrefrigerator-'Allow.atleast3''

(?.5 cm) of airspace at the top ànd on both sides of the refrigerator

and 1" (2.5 cm) ¡"tweei ftreïac* oflhe refrigtt"-t1t,1111h:wall' If

the refrìgerator is going to be placed against a wall' leave extra

,pããá .ri,fre hinge-sidã so the dooï can open wider than its width.

NOTE: This refrigerator may be installed side by side with another

ieirigerato, o, fr""r"r..Allow for a 3' (7'9 "T) "ttt:;-"1:::l:Ï::n

"rrá Jia." andaY+" (0.64 cm) clearance between the appliances'

Electfical Shock Hazard

Plug ìnto a gtounded 3 prong outlet'

Do not temove ground Prong'

Do not use an adaPten

Do not use an extensìon cotd'

FaíIure to follow these ìnslructíons can result ìn death' îìre' or

electuícal shock.

Recommended grounding method

Ãdiusting the Ðoor

L Locate the two front leveling legs taped among the packing materi-

als.

2. Screw these legs into the front holes on the bottom of the refrigera-

tor. The back of the refrígerator rests on two fixed supports.

3. lldjust the front tegs just enough to tift the cabinet up off of the floor.

NOTE: If your model is equipped with rollers, the front legs should be

lowered enough to lift the rollers off of the floor to ensure the refrig-

erator does not roll forward when the door is opened.

4. Place a leveling tool on top of the refrigerator first side to side, then

front to back. Turn leg counterclockwise to raise a corner. Turn leg

clockwise to lower a corner.

5. Repeat Step 4 until refrigerator is level.

6. After refrigerator is fully loaded, recheck with level as in Step 4.

REFRIGERJTTOR USE

In order to ensure proper temperature, you need to permit proper

airflow in the refrigerator. .A.s shown in the illustration, cool air enters

through the refrigerator wail and moves down. The air then re-

circulates through the vent near the bottom.

Do not block any of these vents. If the vents are blocked, airflow will

be prevented, and temperature and moisture problems may occur.

.Allow the refrigerator to cool 6 to I hours before filling. Never add

more than 2 to 3 lbs (907 to 1,350 g) of material per cubic foot (28.32 L)

of refrigerator space.

NOTE: When the refrigerator is first started, the compressor will run

constantly until the refrigerator is cooled, It may take up to 6 or B

hours (or longer), depending on room temperature and the number of

times the refrigerator door is opened. AJter the refrigerator is cooled,

the compressor will turn on and off as needed to keep the refrigerator

at the proper temperature.

The outside of your refrigerator may feel warm. This is normal. The

refrigerator's design and main function is to remove heat from pack-

ages and air space inside the refrigerator. The heat is transferred to

the room air, making the outside of the refrigerator feel warm.

Digital Therrnostat fnstructions

If you find that it is necessary to change the temperature setting' for your

digital thermostat controlled refrig'erator' please refer to the following

instructions. The front panel of the thermostat is illustrated here:

Up & Dom ü¡ows

"s¡lt" key

To see ttre SETPOINT:

Push and immediately release the SE? key -the display will show the

SET point value. Wait 5 seconds and the probe value witl display again'

To change tt.e SETPOINT:

Push and hold the SE? key for more then 2 seconds to change the sef

pornf value; The value of the sef pornf will be displayed, and the

"snowflake" LED wiU start blinking.

To change the SãTvalue:

Push the up or dovrn arrows to the desired setting; The new setting will

be memorized after l5 seconds, provided no other keys are pushed.

REFRIGER.ATOR C¡IRE

CleanÍng Your Frost-Free Refrigeratot

Explosion Hazard

Us e n onfl amrnah I e c le anet'

Frost-free means that you do not have to defrost your refrigera-

tor. Frost is removed by air moving and collecting any moisture

and depositing it on the cooling coil' The cooling coil periodi-

cally warms up enough to melt the frost, and the water then flows

down to the drain pan (located behind the base grill) where it is

evaporated.

Complete cleaning should be done at least once a year.

L Unplug refrigerator or disconnect power.

2. Remove all substances.

3. Wash the inside walls with a solution of mild detergent in warm

water or 2 tbs (26 mg) baking soda to 1 qt (0.95 L) warm water.

. Do not use abrasive or harsh cleaners such as wintlow sprays,

scouring cleansers, flammable fluids, cleaning waxes, concentrated

detergents, bleaches or cleansers containing petroleum products on

plastic parts, interior and door liners or gaskets. Do not use paper

towels, scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

4. Rinse well and wipe dry with a clean soft cloth.

5. Use the appropriate cleaning method for your exterior finish.

Painted metal: wash exteriors with a clean sponge or soft cloth and

a mild detergent in warm water. Do not use abrasive or harsh clean-

ers' or cleaners designed for stainless steel. Dry thoroughly with a

soft cloth. For additional protection against damage to painted metal

exteriors, apply appliance wax (or auto paste wax) with a clean, soft

cloth. Do not wax plastic parts.

6. Plug in refrigerator or reconnect power.

7. Replace all containers. Base Grill

To Remove and Replace the Base GriII:

l. Open the refrigerator door and remove the base grill by pulling

down and out from the top.

2. Replace the base gritl by putting the clips in the openings in the

refrigerator panel. Push in until the base grill snaps into place.

Changing ttre tighìtult

NorE: Not all appliance bulbs will fit your refrigerator. Be sure to

replace the bulb with one of the same size, shape, and. wattage.

l. Unplug refrigerator or disconnect power.

2. Remove the light shield. From the front of the light shield, push

backward and down.

3' Replace the light bulb with an appliance butb of the same wattag-e.

4. Replace the light shield.

5. Plug in refrigerator or reconnect power.

Loss ofPower

Ãfter the power is restored, unplug the refrigerator for 30 minutes, to

allow the refrigeration system to equalize. During this time keep the

door closed whenever possible.

REIVIEIVIBER¡ Jl full refrigerator stays cold longer than a partially

filled one. Moving Care

1. Remove all containers.

2. Unplug the refrigerator.

3. Clean it thoroughly.

4. Tape the refrigerator shut and tape the electrical cord to the cabi-

net.

When you g'et to your new location, refer to the "Installation Instruc-

tions" and "Refrigerator Use" sections for information on installation

and setting the controls.

TROUBI,ESHOOTING

Try the solutions suggested here first to avoid the cost of an un-

necessary sern¡ice call...

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not rernove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or

electrical shock.

.Is the power supply cord unplugged?

Plug into a grounded 3 prong outlet.

. Has a circuit breaker tripped?

Reset the circuit breaker.

The lights does not work

i,r::tlrì::t-,îÌi:a¡ria:itilìl:.:ì::ìat:ì.

' fs the power supply cord unplugged? Piug into a ground.ed 3

prong outlet.

' Is a light bulb loose in the socket or burned out? See "Changing

the Light Bulb.,'

The motor seems to run too much

. fs there sornething preventing the door from closing? Move the

package so the door closes properly.

. Is the roorn ternperature hotter than nor¡nal? The motor will run

longer under warm conditions. llt normal room temperatures, your

motor will run about 40% to BjVo of the time. Under warmer condi-

tions, it will run even more.

. Has a large amount of product just been added to the refrigera-

tor? lldding a large amount of product warms the refrigerator. The

motor normaily will run longer to cool the refrigerator back down.

. fs the door opened often? The motor will run longer when this oc-

curs. Conserve energy by getting all items out at one time, and clos-

ing the door as soon as possible.

. Is the control set correctly for the surrounding conditions? See

"Using the Control."

. Is the door or not closed completely? Push the door firmly shut. If

it will not shut ail the way, see "The door will not close completely"

later in this section.

..ã,xe the condenser coils dirty (on some models)? This prevents

air transfer and makes the motor work harder. Clean the cond.enser

coils. See "Refrigerator Care,"

. Is the door gasket sealed all the way around? Contact a qualified

person or a technician.

. fs there enough air circulation space around the refrigerator?

See "Location Requirements."

NOTEr If the problem is not due to any of the above, remember that

your new refrigerator will run longer than your old one due to its

high-efficiency motor.

Use nonfl a¡nmable cleaner.

Failure to do so can result in death, explosion, or fire.

. Does the refrigerator need to be cleaned? See "Refrigerator

Care."

.Ifre the air vents blosked? This prevents cold air movement.

Move objects away from the air vents. See "Ensuring Proper Air Cir-

culation" for air vent locations.

. Is the door opened often? Be aware that the refrigerator will warm

when this occurs. In order to keep the refrigerator cool, try to get

everything you need out of the refrigerator at once and close the

door as soon as the material is removed.

. Has a large amounf of material just been added to the refrigera-

tor? .A.dding a large amount of material r¡¡arms the refrigerator. It can

take several hours for the refrigerator to return to the normal tem-

perature.

. fs the control set correctly for the surrounding conditions? See

"Using the Control."

The door will not close completely or is difficult to open

..Are containers blocking the door? Rearrange containers so that

they fit more tightly and take up less space.

..ã,re the shelves and basket out of position (on some models)?

'Put the shelves and basket back into their correct positions,

.llre the gaskets dirty or sticky? Clean gaskets according to the

directions in "Refrigerator Care."

. Does the refrigerator wobble or seem unstable? See "Ädjust the

Door."

The refrigerator clicks but does not run

. Has the local power failed? Unplug the refrigerator for 30 minutes

to allow the refrigeration system to equalize. During this time, keep

the door closed whenever possible.

Dieses Handbuch passt für folgende Modelle

Andere Summit Kühlschrank Handbücher

Summit

Summit FF61 Bedienungsanleitung

Summit

Summit BAR77S Bedienungsanleitung

Summit

Summit FELIX STORCH FF-6 Bedienungsanleitung

Summit

Summit FF711ES Bedienungsanleitung

Summit

Summit FFBF285SS Bedienungsanleitung

Summit

Summit FFBF249SS2 Bedienungsanleitung

Summit

Summit FF7LBI Leitfaden

Summit

Summit BDR190NASSHH Leitfaden

Summit

Summit ADRD24 Bedienungsanleitung

Summit

Summit AL750LFR Bedienungsanleitung

Summit

Summit FF510L Leitfaden

Summit

Summit AZRF7W Bedienungsanleitung

Summit

Summit FFBF283SS Bedienungsanleitung

Summit

Summit CL65ROS Bedienungsanleitung

Summit

Summit AL55 Bedienungsanleitung

Summit

Summit FF7BBISSTB Leitfaden

Summit

Summit FF7B Leitfaden

Summit

Summit FF71ES Bedienungsanleitung

Summit

Summit FF6L Leitfaden

Summit

Summit CP351W Bedienungsanleitung

Summit

Summit FF41ES Bedienungsanleitung

Summit

Summit CP97 Bedienungsanleitung

Summit

Summit MB34 Bedienungsanleitung

Summit

Summit FFBF240W Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung