Sun Microsystems Netra CP3060 Bedienungsanleitung

Sun Microsystems, Inc.

www.sun.com

Submit comments about this document at: http://www.sun.com/hwdocs/feedback

Sun Netra™CP3060 Blade Server

User’s Guide

Part No. 819-4967-11

April 2009, Revision A

Please

Recycle

This distribution may include materials developed by third parties.

Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in

the U.S. and in other countries, exclusively licensed through X/Open Company, Ltd.

Sun, Sun Microsystems, the Sun logo, Netra, Sun Ray, the Netra logo and the Solaris logo are trademarks or registered trademarks of Sun

Microsystems, Inc., or its subsidiaries, in the U.S. and other countries.

All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. in the U.S. and other

countries. Products bearing SPARC trademarks are based upon architecture developed by Sun Microsystems, Inc.

Use of any spare or replacement CPUs is limited to repair or one-for-one replacement of CPUs in products exported in compliance with U.S.

export laws. Use of CPUs as product upgrades unless authorized by the U.S. Government is strictly prohibited.

DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,

INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,

ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.

Cette distribution peut comprendre des composants développés par des tierces parties.

Des parties de ce produit pourront être dérivées des systèmes Berkeley BSD licenciés par l’Université de Californie. UNIX est une marque

déposée aux Etats-Unis et dans d’autres pays et licenciée exclusivement par X/Open Company, Ltd.

Sun, Sun Microsystems, le logo Sun, Netra, Sun Ray, le logo Netra et le logo Solaris sont des marques de fabrique ou des marques déposées de

Sun Microsystems, Inc., ou ses ﬁliales, aux Etats-Unis et dans d’autres pays.

Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.

aux Etats-Unis et dans d’autres pays. Les produits portant les marques SPARC sont basés sur une architecture développée par Sun

Microsystems, Inc.

L’utilisation de pieces detachees ou d’unites centrales de remplacement est limitee aux reparations ou a l’echange standard d’unites centrales

pour les produits exportes, conformement a la legislation americaine en matiere d’exportation. Sauf autorisation par les autorites des Etats-

Unis, l’utilisation d’unites centrales pour proceder a des mises a jour de produits est rigoureusement interdite.

LA DOCUMENTATION EST FOURNIE "EN L’ETAT" ET TOUTES AUTRES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES

OU TACITES SONT FORMELLEMENT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT

TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L’APTITUDE A UNE UTILISATION PARTICULIERE OU A

L’ABSENCE DE CONTREFACON.

iii

Contents

Preface xi

1. Introduction to the Sun Netra CP3060 Blade Server 1–1

1.1 Overview of the Sun Netra CP3060 Blade Server 1–1

1.2 Features of the Sun Netra CP3060 Blade Server 1–2

1.3 Sun Netra CP3060 Blade Server System Configurations 1–7

1.3.1 AMC Modules 1–8

1.3.2 Rear Transition Module 1–8

1.4 Hot-Swap Support 1–11

1.5 System Requirements 1–11

1.5.1 Hardware Requirements 1–12

1.5.2 Software Requirements 1–12

1.6 Technical Support and Warranty 1–13

1.6.1 Blade Server Part Number, Serial Number, and Revision Number

Identification 1–13

2. Hardware Installation 2–1

2.1 Equipment and Operator Safety 2–1

2.2 Materials and Tools Required 2–2

2.3 Preparing for the Installation 2–3

iv Netra CP3060 Board User’s Guide • April 2009

2.3.1 Checking Power, Thermal, Environmental, and Space

Requirements 2–3

2.3.2 Determining Local Network IP Addresses and Host Names 2–4

2.3.3 Installation Procedure Summary 2–4

2.4 Configuring the Blade Server Hardware 2–5

2.4.1 Installation of DDR-2 DIMM Memory Modules 2–5

2.4.1.1 Installing a DDR-2 DIMM Memory Module 2–7

2.4.1.2 Removing a DDR-2 DIMM Memory Module 2–8

2.4.2 Installation of Optional Compact Flash Card 2–9

2.4.3 Configuring Rear Transition Module Hardware 2–11

2.5 Installing the Sun Netra CP3060 Blade Server 2–11

2.5.1 Installing the Sun Netra CP3060 Blade Server With a Rear

Transition Module 2–11

2.5.1.1 Installing a Rear Transition Module 2–12

2.5.2 Installing the Sun Netra CP3060 Blade Server 2–15

2.6 Connecting External I/O Cables 2–17

2.7 Installation of Optional AMC Modules 2–18

2.7.0.1 Installing an Optional AMC Module 2–19

3. Software Installation 3–1

3.1 Operating Systems and Patches 3–1

3.2 Firmware Updates 3–2

3.3 Mandatory /etc/system File Entry 3–2

▼To Check and Create the Mandatory /etc/system File Entry 2

3.4 Installing Diskless Clients 3–3

3.4.1 Creating a Boot Server for Diskless Clients 3–3

3.4.2 Adding a Diskless Client 3–5

3.5 Downloading and Installing SunVTS Software 3–7

4. Firmware and Blade Server Management 4–1

Contents v

4.1 System Firmware 4–1

4.2 Power-On Self-Test Diagnostics 4–2

4.2.1 POST Test Coverage 4–2

4.2.2 POST Diagnostic and Error Message Format 4–3

4.3 OpenBoot Firmware 4–3

4.3.1 Getting to the ok Prompt 4–4

4.3.2 Auto-Boot Options 4–5

4.3.3 OpenBoot Commands 4–5

4.3.3.1 probe-ide Command 4–6

4.3.3.2 show-devs Command 4–6

4.3.3.3 Checking Network Using watch-net and watch-net-

all Commands 4–8

4.3.4 OpenBoot Configuration Variables 4–9

4.3.4.1 Viewing and Setting OpenBoot Configuration

Variables 4–12

4.4 Error Handling Summary 4–12

4.5 Automatic System Recovery 4–13

4.5.1 Enabling and Disabling Automatic System Recovery 4–14

4.5.1.1 To Enable Automatic System Recovery 4–14

4.5.1.2 To Disable Automatic System Recovery 4–15

4.6 Hot-Swap Information 4–15

4.6.1 Hot-Swapping the Sun Netra CP3060 Blade Server 4–15

4.6.1.1 Hot-Swap LED 4–16

4.7 Network Device Aliases 4–17

4.8 Retrieving Device Information 4–17

4.9 Mandatory /etc/system File Entry 4–20

▼To Check and Create the Mandatory /etc/system File Entry 20

5. Hardware and Functional Descriptions 5–1

5.1 Hardware Architecture 5–1

vi Netra CP3060 Board User’s Guide • April 2009

5.1.1 UltraSPARC T1 Processor 5–4

5.1.1.1 Overview 5–4

5.1.1.2 Cores and Cache 5–5

5.1.1.3 Memory Controller 5–6

5.1.1.4 Instruction Set 5–6

5.1.1.5 Interrupts 5–6

5.1.1.6 UltraSPARC T1 RAS Features 5–6

5.1.1.7 UltraSPARC T1 Processor Speed 5–6

5.1.2 DDR-2 Memory Subsystem 5–7

5.1.2.1 DIMMs 5–7

5.1.2.2 Memory Subsystem RAS Features 5–8

5.1.2.3 Serial Presence Detect 5–9

5.1.3 System JBus 5–9

5.1.3.1 JBus RAS Features 5–9

5.1.4 I/O Subsystem 5–9

5.1.4.1 JBus-to-PCI-E Bridge 5–10

5.1.4.2 PCI-E Switch 5–11

5.1.4.3 PCI-E to Dual GbE Controller 5–11

5.1.4.4 Ethernet Switch 5–12

5.1.4.5 AMC Slot 5–12

5.1.4.6 Southbridge 5–16

5.1.5 Service Processor MPC885 5–17

5.1.5.1 MPC Bus External Devices 5–18

5.1.5.2 Field-Programmable Gate Array 5–18

5.1.5.3 XBus External devices 5–19

5.1.6 Intelligent Platform Management Controller 5–19

5.1.6.1 Intelligent Platform Management Bus 5–19

5.1.6.2 Interface to the MPC 5–19

Contents vii

5.1.6.3 IPMB-L Interface 5–20

5.1.6.4 ATCA Hot-Swap Latch 5–20

5.1.6.5 LEDs 5–20

5.1.6.6 Power Control 5–20

5.1.6.7 Extended Interface E-keying Control 5–21

5.1.6.8 I2C Architecture 5–21

5.1.6.9 I2C Device Address Map 5–22

5.1.6.10 System Monitor and Thresholds 5–24

5.2 Power-on Sequence 5–26

5.3 Power 5–27

5.3.1 Power Input 5–27

5.3.2 Fuses 5–27

5.3.3 ATCA Power Module (-48V to 12V) 5–28

5.3.4 On-Board DC/DC Regulators 5–28

5.3.5 TOD Clock Battery 5–28

A. Physical Characteristics A–1

A.1 Form Factor A–1

A.2 Layout A–1

A.3 Front Panel A–2

A.3.1 Visual Indicators A–3

A.3.2 Ports A–3

A.3.3 AMC Slot A–3

A.4 Connectors and Pinout A–3

A.4.1 Front Panel Connectors A–3

A.4.1.1 Ethernet Ports A–4

A.4.1.2 Serial Port A–4

A.4.2 AMC Connector A–5

A.4.3 Compact Flash Connector A–7

viii Netra CP3060 Board User’s Guide • April 2009

A.4.4 Midplane Power Connector (Zone 1) A–7

A.4.5 Data Transport Connector (Zone 2) A–9

A.4.6 RTM Connector (Zone 3) A–11

A.4.7 TOD Clock Battery Holder A–14

B. Sun OEM IPMI Commands B–1

B.1 Get Version Command B–2

B.2 Get RTM Status Command B–3

Index Index–1

Figures

FIGURE 1-1 Sun Netra CP3060 Blade Server Front Panel 1–4

FIGURE 1-2 Sun Netra CP3060 Blade Server (Top View) 1–4

FIGURE 1-3 Sun Netra CP3060 Blade Server in an ATCA Shelf Enclosure 1–8

FIGURE 1-4 Sun Netra CP3060 Rear Transition Module 1–9

FIGURE 1-5 Relationship of the Sun Netra CP3060 Blade Server, Midplane, and RTM 1–10

FIGURE 1-6 Sun Netra CP3060 Blade Server Barcode Labeling 1–14

FIGURE 2-1 DDR-2 DIMM Memory Locations 2–6

FIGURE 2-2 Installing a DDR-2 DIMM Memory Module 2–8

FIGURE 2-3 Removing a DDR-2 DIMM Memory Module 2–9

FIGURE 2-4 Compact Flash Card Connector 2–10

FIGURE 2-5 Installing the Sun Netra CP3060 Rear Transition Module 2–12

FIGURE 2-6 RTM Injector/Ejector Latch and Locking Screw 2–14

FIGURE 2-7 Installing Node Blade Server Into Chassis Slot 2–16

FIGURE 2-8 Sun Netra CP3060 Blade Server Latches and Locking Screws 2–17

FIGURE 2-9 Removing AMC Slot Filler Panel 2–19

FIGURE 2-10 Inserting AMC Module Into AMC Connector 2–20

FIGURE 4-1 Hot-Swap Latch and Hot-Swap LED 4–16

FIGURE 5-1 Block Diagram 5–3

FIGURE 5-2 UltraSPARC T1 Multicore Processor Block Diagram 5–5

FIGURE 5-3 DDR Memory Diagram 5–8

xNetra CP3060 Board User’s Guide • April 2009

FIGURE 5-4 AMC Power and Management Infrastructure 5–14

FIGURE 5-5 Clock Synchronization 5–16

FIGURE 5-6 I2C Block Diagram 5–22

FIGURE A-1 Sun Netra CP3060 Blade Server Layout A–2

FIGURE A-2 Ethernet RJ-45 Connector A–4

FIGURE A-3 Front Panel Serial Port Diagram A–5

FIGURE A-4 Power Distribution Connector (Zone 1) P10 A–8

FIGURE A-5 Zone 2 Connectors A–10

FIGURE A-6 Zone 3 Connectors A–12

Inhaltsverzeichnis

Andere Sun Microsystems Server Handbücher

Sun Microsystems

Sun Microsystems Netra 240 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Fire 4810 Installationsanleitung

Sun Microsystems

Sun Microsystems V250 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V490 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V1280 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire 15K Technisches Handbuch

Sun Microsystems

Sun Microsystems Sun Enterprise 10000 Technisches Handbuch

Sun Microsystems

Sun Microsystems Sun Fire X2100 M2 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire E2900 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Ray 100 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Ultra Enterprise 450 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire X4170 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Ray 150 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Fire X4600 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Blade T6300 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra T1 AC200 Service-Handbuch

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M3000 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V890 Installationsanleitung

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Service-Handbuch

Sun Microsystems

Sun Microsystems Sun Fire V20z Programmierhandbuch

Sun Microsystems

Sun Microsystems Netra X1 Service-Handbuch

Sun Microsystems

Sun Microsystems Sun Enterprise 6500 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M3000 Service-Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung