Sun Microsystems Sun Fire X4250 Installations- und Betriebsanleitung

Sun Microsystems, Inc.

www.sun.com

Submit comments about this document at: http://www.sun.com/hwdocs/feedback

Sun Fire X4250 and X4450 Servers

Safety and Compliance Guide

Part No. 820-2704-11

July 2008, Revision A

Please

Recycle

THIS PRODUCT CONTAINS CONFIDENTIAL INFORMATION AND TRADE SECRETS OF SUN MICROSYSTEMS, INC. USE,

DISCLOSURE OR REPRODUCTION IS PROHIBITED WITHOUT THE PRIOR EXPRESS WRITTEN PERMISSION OF SUN MICROSYSTEMS,

INC.

This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo, Java, Solaris, and Sun Fire are

trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Intel is a trademark or registered trademark of

Intel Corporation or its subsidiaries in the United States and other countries. Intel Inside is a trademark or registered trademark of Intel

Corporation or its subsidiaries in the United States and other countries.

This product is covered and controlled by U.S. Export Control laws and may be subject to the export or import laws in other countries. Nuclear,

missile, chemical biological weapons or nuclear maritime end uses or end users, whether direct or indirect, are strictly prohibited. Export or

reexport to countries subject to U.S. embargo or to entities identiﬁed on U.S. export exclusion lists, including, but not limited to, the denied

persons and specially designated nationals lists is strictly prohibited.

Use of any spare or replacement CPUs is limited to repair or one-for-one replacement of CPUs in products exported in compliance with U.S.

export laws. Use of CPUs as product upgrades unless authorized by the U.S. Government is strictly prohibited.

CE PRODUIT CONTIENT DES INFORMATIONS CONFIDENTIELLES ET DES SECRETS COMMERCIAUX DE SUN MICROSYSTEMS, INC.

SON UTILISATION, SA DIVULGATION ET SA REPRODUCTION SONT INTERDITES SANS L’AUTORISATION EXPRESSE, ECRITE ET

PREALABLE DE SUN MICROSYSTEMS, INC.

Cette distribution peut des éléments développés par des tiers. Sun, Sun Microsystems, le logo Sun, Java, Solaris, et Sun Fire sont des marques

de fabrique ou des marques déposées de Sun Microsystems, Inc. aux Etats-Unis et dans d’autres pays. Intel est une marque de fabrique ou une

marque déposée de Intel Corporation ou de sa ﬁliale aux Etats-Unis et dans d’autres pays. Intel Inside est une marque de fabrique ou une

marque déposée de Intel Corporation ou de sa ﬁliale aux Etats-Unis et dans d’autres pays.

Ce produit est soumis à la législation américaine sur le contrôle des exportations et peut être soumis à la règlementation en vigueur dans

d’autres pays dans le domaine des exportations et importations. Les utilisations ﬁnales, ou utilisateurs ﬁnaux, pour des armes nucléaires, des

missiles, des armes biologiques et chimiques ou du nucléaire maritime, directement ou indirectement, sont strictement interdites. Les

exportations ou reexportations vers les pays sous embargo américain, ou vers des entités ﬁgurant sur les listes d’exclusion d’exportation

américaines, y compris, mais de maniere non exhaustive, la liste de personnes qui font objet d’un ordre de ne pas participer, d’une façon directe

ou indirecte, aux exportations des produits ou des services qui sont régis par la législation américaine sur le contrôle des exportations et la liste

de ressortissants spéciﬁquement désignés, sont rigoureusement interdites.

L’utilisation de pièces détachées ou d’unités centrales de remplacement est limitée aux réparations ou à l’échange standard d’unités centrales

pour les produits exportés, conformément à la législation américaine en matière d’exportation. Sauf autorisation par les autorités des Etats-

Unis, l’utilisation d’unités centrales pour procéder à des mises à jour de produits est rigoureusement interdite.

iii

Contents

Regulatory Compliance Statements 1

Safety Agency Compliance Statement 5

Declaration of Conformity 17

iv Sun Fire X4250 and X4450 Servers Safety and Compliance Guide • July 2008

Regulatory Compliance Statements

Your Sun product is marked to indicate its compliance class:

•Federal Communications Commission (FCC) — USA

•Industry Canada Equipment Standard for Digital Equipment (ICES-003) — Canada

•Voluntary Control Council for Interference (VCCI) — Japan

•Bureau of Standards Metrology and Inspection (BSMI) — Taiwan

Please read the appropriate section that corresponds to the marking on your Sun product before attempting to install the

product.

FCC Class A Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is

not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required

to correct the interference at his own expense.

Modifications: Any modiﬁcations made to this device that are not approved by Sun Microsystems, Inc. may void the authority

granted to the user by the FCC to operate this equipment.

FCC Class B Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/television technician for help.

Modifications: Any modiﬁcations made to this device that are not approved by Sun Microsystems, Inc. may void the authority

granted to the user by the FCC to operate this equipment.

2Sun Fire X4250 and X4450 Servers Safety and Compliance Guide • July 2008

ICES-003 Class A Notice - Avis NMB-003, Classe A

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

ICES-003 Class B Notice - Avis NMB-003, Classe B

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Regulatory Compliance Statements 3

BSMI Class A Notice

The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliance

label.

CCC Class A Notice

The following statement is applicable to products shipped to China and marked with “Class A” on the product’s compliance

label.

GOST-R Certiﬁcation Mark

T33012

4Sun Fire X4250 and X4450 Servers Safety and Compliance Guide • July 2008

Safety Agency Compliance

Statement

Read this section before beginning any procedure. The

following text provides safety precautions to follow when

installing a Sun Microsystems product.

Safety Precautions

For your protection, observe the following safety

precautions when setting up your equipment:

■Follow all cautions and instructions marked on the

equipment.

■Ensure that the voltage and frequency of your power

source match the voltage and frequency inscribed on

the equipment’s electrical rating label.

■Never push objects of any kind through openings in

the equipment. Dangerous voltages may be present.

Conductive foreign objects could produce a short

circuit that could cause fire, electric shock, or damage

to your equipment.

Symbols

The following symbols may appear in this book:

Caution – There is a risk of personal injury

and equipment damage. Follow the

instructions.

Caution – Hot surface. Avoid contact.

Surfaces are hot and may cause personal

injury if touched.

Caution – Hazardous voltages are present. To

reduce the risk of electric shock and danger to

personal health, follow the instructions.

Depending on the type of power switch your device has,

one of the following symbols may be used:

On – Applies AC power to the system.

Off – Removes AC power from the system.

Standby – The On/Standby switch is in the

standby position.

Modifications to Equipment

Do not make mechanical or electrical modifications to the

equipment. Sun Microsystems is not responsible for

regulatory compliance of a modified Sun product.

Placement of a Sun Product

Caution – Do not block or cover the openings

of your Sun product. Never place a Sun

product near a radiator or heat register.

Failure to follow these guidelines can cause

overheating and affect the reliability of your

Sun product.

Noise Level

Product: Sun Fire X4250 and X4450 servers

Declared Noise emissions in accordance with ISO 9296

SELV Compliance

Safety status of I/O connections comply to SELV

requirements.

Operating Idling

LWAd (1B=10dB) 7.3 B 7.3 B

6Sun Fire X4250 and X4450 Servers Safety and Compliance Guide • July 2008

Power Cord Connection

Caution – Sun products are designed to work

with power systems having a grounded

neutral (grounded return for DC-powered

products). To reduce the risk of electric shock,

do not plug Sun products into any other type

of power system. Contact your facilities

manager or a qualified electrician if you are

not sure what type of power is supplied to

your building.

Caution – Not all power cords have the same

current ratings. Do not use the power cord

provided with your equipment for any other

products or use. Household extension cords

do not have overload protection and are not

meant for use with computer systems. Do not

use household extension cords with your Sun

product.

The following caution applies only to devices with a

Standby power switch:

Caution – The power switch of this product

functions as a standby type device only. The

power cord serves as the primary disconnect

device for the system. Be sure to plug the

power cord into a grounded power outlet that

is nearby the system and is readily accessible.

Do not connect the power cord when the

power supply has been removed from the

system chassis.

The following caution applies only to devices with multiple

power cords:

Caution – For products with multiple power

cords, all power cords must be disconnected

to completely remove power from the system.

Battery Warning

Caution – There is danger of explosion if

batteries are mishandled or incorrectly

replaced. On systems with replaceable

batteries, replace only with the same

manufacturer and type or equivalent type

recommended by the manufacturer per the

instructions provided in the product service

manual. Do not disassemble batteries or

attempt to recharge them outside the system.

Do not dispose of batteries in fire. Dispose of

batteries properly in accordance with the

manufacturer’s instructions and local

regulations. Note that on Sun CPU boards,

there is a lithium battery molded into the real-

time clock. These batteries are not customer

replaceable parts.

System Unit Cover

You must remove the cover of your Sun computer system

unit to add cards, memory, or internal storage devices. Be

sure to replace the cover before powering on your computer

system.

Caution – Do not operate Sun products

without the cover in place. Failure to take this

precaution may result in personal injury and

system damage.

Rack System Warning

The following warnings apply to Racks and Rack Mounted

systems.

Caution – For safety, equipment should

always be loaded from the bottom up. That is,

install the equipment that will be mounted in

the lowest part of the rack first, then the next

higher systems, etc.

Andere Handbücher für Sun Fire X4250

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Sun Microsystems Server Handbücher

Sun Microsystems

Sun Microsystems Sun HPC 3.0 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra st D130 Handbuch

Sun Microsystems

Sun Microsystems X3-3L Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra 440 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra T2000 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra T1 AC200 Service-Handbuch

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V440 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Ray 100 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire X4440 Installations- und Betriebsanleitung

Sun Microsystems

Sun Microsystems SunLink SNA 9.1 PU2.1 Bedienungsanleitung

Sun Microsystems

Sun Microsystems SUN FIRE 280R Bedienungsanleitung

Sun Microsystems

Sun Microsystems StorEdge Bedienungsanleitung

Sun Microsystems

Sun Microsystems Fire 880 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Ultra Enterprise 6000 Systems Benutzerhandbuch

Sun Microsystems

Sun Microsystems Sun Blade X6250 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Netra CP3260 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra 440 Bedienungs- und Sicherheitshinweise

Sun Microsystems

Sun Microsystems 15K/9960 Technisches Handbuch

Sun Microsystems

Sun Microsystems Netra CT 820 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Ultra Enterprise 450 Handbuch

Sun Microsystems

Sun Microsystems Netra X1 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Ultra Enterprise 450 Installations- und Betriebshandbuch

Sun Microsystems

Sun Microsystems Sun Enterprise 4000 Installations- und Betriebshandbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung