Sun Microsystems Sun Fire X2270 Bedienungsanleitung

This guide describes the minimum steps you must perform to power on and boot your server for the first time.

Detailed installation information can be found in the Sun Fire X2270 Server Installation Guide, which is available

at the Sun documentation web site:

http://docs.sun.com/app/docs/prod/sf.x2270

Refer to the section “Documentation for This Product” at the end of this document for a complete list of

documentation for this system.

Contents

Carefully unpack all server components from the packing cartons. The following items might be packaged with

your Sun Fire X2270 Server:

■Power cord packaged separately with country kit

■Hardware applicable to the system, such as adapters and network cables

■Sun Fire X2270 Server Base Documentation Kit, including the following:

■Sun Fire X2270 Server Getting Started Guide

■License and safety documentation

■(Optional) Sun Fire X2270 Server Documentation and Media Kit, including the following:

■Sun Fire X2270 Server Installation Guide

■Tools & Drivers DVD (includes drivers and additional software), SIA CD/DVD, and SunVTS CD/DVD

■Additional license and safety documentation

■(Optional) Rackmount kit containing rack rails and installation instructions

Safety and Compliance Information

Before performing an installation, refer to the following documents for safety information regarding the Sun Fire

X2270 Server:

■Important Safety Information for Sun Hardware Systems – Printed document included in the ship kit.

■Sun Fire X2270 Server Safety and Compliance Manual – Available online at the Sun documentation web site.

▼Install Optional Components

Before installing the server into the rack, you must first install any optional components that you ordered with

the server, such as DIMMs, PCIe cards, and so on. Refer to the Sun Fire X2270 Server Service Manual for the

instructions on installing optional components.

Sun Fire X2270 Server

Getting Started Guide

▼Mount the System in a Rack

For rackmounting instructions, refer to the instructions included with the rail kit, the service label on the server,

and the online Sun Fire X2270 Server Service Manual.

▼Connect the Cables

1. Connect a serial cable between the server’s SER MGT port and a terminal device.

For systems that contain a service processor (SP) module, the connection to the server’s SER MGT port

provides your initial communication with the SP. The device must be set up to communicate using 9600

baud, 8 bit, no parity, 1 stop bit. A null modem configuration is needed, meaning the transmit and receive

signals are reversed (crossed over) for DTE to DTE communications. You can use the supplied RJ-45

crossover adapter with a standard RJ-45 cable to achieve the null modem configuration.

2. (Optional) Connect an Ethernet cable between the server’s NET MGT port and the network to which

future connections to the SP and host will be made.

After the initial configuration of the system using the SER MGT port, communication with the SP and host is

usually performed through this Ethernet interface.

3. Connect an Ethernet cable between one of the server’s NET ports (NET-0 or NET-1) and the network to

which the server will communicate.

4. Plug the power cord into the power supply.

When power is applied, the SP initializes and the Power/OK LED flashes. After a few minutes, the SP login

prompt appears on the terminal device. Note that the host is not initialized or powered on yet.

For more information on connectivity options, refer to the Sun Fire X2270 Server Installation Guide.

▼Power On the System

Use this procedure to apply standby power to the service processor (SP) before initial configuration.

Figure Legend

1AC Power connector 5USB 2.0 ports (2)

2Serial Management (SER MGT) RS-232 RJ-45 serial port 6Network Management (NET MGT) Ethernet port (available

only in systems that contain a service processor module)

3Gigabit Ethernet port (NET-0) 7HD15 video connector (available only in systems that

contain a service processor module)

4Gigabit Ethernet port (NET-1) 8

Caution – Do not operate the server without all fans, component heatsinks, air baffles, and the cover

installed. Severe damage to server components can occur if the server is operated without adequate

cooling mechanisms.

Note – Step 1, which describes how to apply standby power for initial SP configuration, is applicable only to

systems that contain an SP module. If your system does not contain an SP, continue with Step 2 to apply main

power to the server.

1. Verify that the power cords have been connected and that standby power is on.

At this point, standby power is supplied only to the service processor and power supply fans. Do not apply

main power to the rest of the server until you are ready to install a platform operating system. In standby

power mode, the Power/OK LED on the front panel flashes.

2. Press and release the Power button on the server front panel to apply main power to the server.

When main power is applied to the full server, the Power/OK LED next to the Power button lights and

remains lit.

Note – The first time the server powers on, the power-on self-test (POST) can take up to 1 minute to complete.

3. Continue with initial software setup tasks, as described in the Sun Fire X2270 Server Installation Guide.

Connection Options

This section describes the tasks for initial setup of the service processor (SP) and Integrated Lights Out Manager

(ILOM) software. Refer to the Sun Fire X2270 Server Installation Guide and the Sun Integrated Lights Out Manager

2.0 User’s Guide for instructions on using ILOM to configure and manage the Sun Fire X2270 Server.

You can connect to the ILOM SP to perform initial setup and configuration in three ways:

■Connect to ILOM Using a Serial Connection

■Connect to ILOM Using an Ethernet Connection (DHCP)

■Connect to ILOM Using an Ethernet Connection (static IP address)

Figure Legend

1Green Power/OK LED 3System Serial Number label

2Power button 4

12 3

The method for connecting to ILOM using a serial connection is given in this document. For the remaining

methods, refer to the Sun Fire X2270 Server Installation Guide.

Note – If your server does not contain an SP module or an optional video card, connect the terminal to the server

serial port. Video is routed to the serial port in systems that do not contain an SP or a video card. If your system

does not contain an SP module, skip the steps that require you to log in to and start ILOM.

▼Connect to ILOM Using a Serial Connection

1. Verify that your terminal, laptop, or terminal server is operational.

2. If not already configured, configure the terminal device or the terminal emulation software running on

your laptop or PC. For information and procedures, see “Connect the Cables” .

3. If not already connected, connect a serial cable from the RJ-45 SER MGT port on the server’s back panel

to the terminal device. For information and procedures, see “Connect the Cables” .

4. Press Enter on the terminal device to establish a connection between the terminal device and the

ILOM SP.

The SP eventually displays a login prompt, such as the following example:

SUNSP003BA84D777 login:

5. Log in to ILOM.

a. Type the default user name: root.

b. Type the default password: changeme.

Once you have successfully logged in, the SP displays its default command prompt:

You can now run command-line interface (CLI) commands to configure ILOM for the server’s user accounts,

network settings, access lists, alerts, and other parameters. For detailed instructions on CLI commands, see

the Sun Integrated Lights Out Manager 2.0 User’s Guide.

Note – You can switch back to the SP CLI from the serial console by entering the Esc ( key sequence.

▼Register the System

1. Locate the serial number for your system. The serial number is located on the Sun EZ label, the customer

information sheet that came with the system, and on the System Serial Number label located on the front

of the server.

2. Go to the following web site to register your system:

http://www.sun.com/service/warranty/index.xml#reg

▼Set Up the Platform Operating System, Driver Software, and Firmware

After configuring the ILOM SP with network settings, you can configure an optional preinstalled operating

system (OS) or install a supported Solaris™, Linux, or Windows platform OS and drivers. For more information

and instructions, see the following documents.

Note – Sun highly recommends that you use the Sun Installation Assistant (SIA) software when installing an OS

other than Solaris. SIA will help locate and install all necessary OS components automatically.

▼Upgrade Firmware

For instructions on upgrading firmware on your system, refer to the Sun Fire X2270 Server Service Manual.

Documentation for This Product

The following table lists the documentation in the approximate order of the tasks that you might perform when

installing a new system. Review the tasks on the left, then refer to the corresponding documentation on the

right. You can find the most up-to-date versions of all the documents at the Sun documentation web site:

http://docs.sun.com/app/docs/prod/sf.x2270

For translated versions of the documentation, go to the http://docs.sun.com web site, then select your

language to get the documentation set in your language.

Operating System Read this document: For additional information, go to:

Preinstalled Solaris Sun Fire X2270 Server Installation Guide http://www.sun.com/

software/preinstall

Solaris Sun Fire X2270 Server OS Installation Guide http://www.sun.com/servers/

x64/x2270/os.jsp

Linux Sun Fire X2270 Server OS Installation Guide

Sun Installation Assistant for Windows and Linux User’s Guide http://www.sun.com/

systemmanagement/sia.jsp

Windows Sun Installation Assistant for Windows and Linux User’s Guide

Sun Fire X2270 Server Windows OS Installation Guide http://www.sun.com/servers/

x64/x2270/os.jsp

Note – For information about supported operating systems, patches, and the latest firmware, refer to the Sun Fire X2270

Server Product Notes. Information on the latest firmware is also available at: http://www.sun.com/server/x64/x2270/

downloads.jsp.

Task Document Type Part Number

Review the safety information. Safety and Compliance Manual (820-5605)

Important Safety Information for Sun

Hardware Systems

(816-7190)

Review any known issues and workarounds. Product Notes (820-5608)

Install rack hardware.

Cable and power on server.

Connect to the service processor and determine network

settings.

Configure the optional preinstalled Solaris OS.

Installation Guide (820-5604)

Part No. 820-5610-11, Rev. A

April 2009

Sun Microsystems, Inc.

www.sun.com

Sun Contact Information

Topic URL

Technical support http://www.sun.com/service/contacting

Submitting comments about this

document

http://www.sun.com/hwdocs/feedback

Please include the title and part number of your document with your feedback:

Sun Fire X2270 Server Getting Started Guide, part number 820-5610-11

Patch and firmware updates http://www.sun.com/support/index.jsp

Install supported operating systems.

Reinstall Solaris, or install Linux or Windows Server.

Operating System Installation Guide (820-5606)

Windows Operating System Installation

Guide

(820-7143)

Sun Installation Assistant for Windows

and Linux User’s Guide

(820-3357)

Manage server accounts, monitor alerts, set remote access

and redirection, and view component status and event logs.

Sun Integrated Lights Out Manager 2.0

User’s Guide

(820-1188)

Sun Integrated Lights Out Manager 2.0

Supplement for Sun Fire X2270 Server

(820-5609)

Customize BIOS settings and RAID settings.

Remove and replace hardware components.

Troubleshoot and isolate server problems.

Review system specifications and hardware reference

material.

Service Manual (820-5607)

Diagnose system issues. Diagnostics Guide (820-6750)

Task Document Type Part Number

Andere Handbücher für Sun Fire X2270

Inhaltsverzeichnis

Andere Sun Microsystems Server Handbücher

Sun Microsystems

Sun Microsystems Sun Fire X4270 Installations- und Betriebsanleitung

Sun Microsystems

Sun Microsystems Fire V210 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Enterprise Expansion Cabinet Optional Power... Bedienungsanleitung

Sun Microsystems

Sun Microsystems Solaris 7 11/99 Montageanleitung

Sun Microsystems

Sun Microsystems Sun Fire V445 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V880z Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra T1 AC200 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Fire X2270 M2 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Server X4-2 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra CT 820 Bedienungsanleitung

Sun Microsystems

Sun Microsystems SunSwift SPARCserver 1000 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Enterprise 250 Installations- und Betriebshandbuch

Sun Microsystems

Sun Microsystems Netra X1 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Technical Compute Farm Handbuch

Sun Microsystems

Sun Microsystems Sun Fire V445 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Blade X8400 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Enterprise 250 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Blade X6270 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V890 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire X4170 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun N2000 Series Referenzhandbuch

Sun Microsystems

Sun Microsystems Sun Blade X6440 s Service-Handbuch

Sun Microsystems

Sun Microsystems StorEdge 6320 System 1.0 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Fire 3800 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung