Sundirect Smart1.0 Bedienungsanleitung
1
Smart1.0Pro
WiFi-Enabled Wireless thermostat
Operation Instructions
Version: SDUM-200201
EN
DE
HU
SLO
HR
CZ
SK
NL
Table of Contents:
1. General Introduction
2. Key features
2.1 Open window detection
2.2 Adaptive start technology
3. Display and buttons
4. Mounting instructions
5. Operation instructions
5.1 Pair to the receiver
5.2 Time settings and temperature calibration
5.3 Brief introduction of operation modes
5.4 Manual mode
5.5 Smart mode
5.5.1 Entering smart mode
5.5.2 Smart mode program setting
5.6 Holiday mode
5.6.1 Entering holiday mode
5.6.2 Quitting holiday mode
5.7 Child lock
6. WIFI and APP operation
6.1 How to download Sundirect Smart APP
6.2 Connect to WiFi
7. Technical specifications
8. Warranty and disposal
2
EN
1. General introduction
The Smart1.0Pro is specifically designed to work together with Sundirect
“Plus” range infrared panel heaters. Smart1.0Pro is a wireless thermostat
remote control. The receiver that pairs to Smart1.0Pro has already been
pre-assembled on the backside of the panel. One Smart1.0Pro can pair
to more than one “Plus” heater, i.e. multiple heaters within one room can
be controlled by the Smart1.0Pro thermostat."
The Smart1.0Pro will operate the “Plus” range infrared heaters by turning
them ON if the room temperature is lower than the desired room
temperature and will turn them OFF if the room temperature is reached."
Please read these instructions carefully and keep safe for future use.
Failure to comply with these instructions will void your warranty."
2. Key features
2.1 Open window detection
When the room temperature is above 14°C and our system detects a
dramatic temperature drop in a short time period, it will recognize that a
door/window was opened. To save energy Smart1.0Pro will power offand
re-start heating after one hour. If you closed the window/door or you
would like to start heating again you can manually turn on the heater
again by pressing the power button. You can activate/deactivate this
function by pressing “SET” and “+” buttons together for 3seconds. "
2.2 Adaptive start technology
When in Smart mode, if the temperature is significantly lower 15 minutes
before the next PRG period than the set temperature in that period, the
system will self-learn to adjust and turn on the heater earlier if necessary.
This gives you a more comfortable temperature right from the start of the
next PRG period. You can activate/deactivate this function by
pressing “SET” and “-” buttons together for 3seconds. "
3
3. Display and buttons
4. Mounting instructions
Smart1.0Pro is designed to be
installed to the standard electrical
box. Follow the drawing to finish
the mounting."
4
1: Weekday$ "
2: Time"
3: Temperature"
4. Heat-on status"
5: Operation Modes"
6: Holiday dates"
7: PRG period "
8: Power button"
9: SET button"
10: PRG button"
11: - button"
12: + button"
13: Holiday button
5.1 Pair to the receiver
All “Plus” range heaters have a built-in
thermostat receiver-Receiver01 on the
backside of the panel. On the right, see the
drawing of the signal lights and button of
Receiver01. The following is a detailed
description of the buttons and signal lights:"
1.Pair status signal light (green light)
2.Heating status signal light (red light)
3.“P” button "
4. Power switch"
Step1: Plug your heater to an electricity outlet, switch the Power switch
of Receiver01 on, double press the “P” button and the “Pair signal light”
will start to flash and is ready for pairing."
Step2: Power-offthe Smart1.0Pro, long press the “SET” button. The
“PAIR” signal will show on the screen of the remote control. Wait until the
“Pair signal light” stops flashing and glows green to finish the pairing."
Note: Once Receiver01 and Smart1.0ProPro are paired, the pair signal
light will always be on and the Receiver01 will be only commanded by the
Smart1.0 Pro. One Receiver01 can only pair to one Smart1.0Pro,
however, one Smart1.0Pro can be paired to several Receiver01 if they are
in the same room."
5.2 Time settings and temperature calibration
Power on Smart1.0Pro. Press “SET” button for 5 seconds to enter the
settings. The screen on the thermostat will show as below and the
minutes of the timer setting will start to flash. "
5
Modify the settings by pressing “-” and “+” button. Continue by pressing
“SET” to save the settings and to shift to the settings from one menu to
another."
If you would like to leave the settings, press the “POWER” button to quit."
5.3 Brief introduction of operation modes
Smart1.0Pro has 3 different operation modes: "
•Manual mode (MAN): Simple manual temperature control."
•Smart mode (PRG): Programmable temperature control- 7days per
week*4 time zones per day. "
•Holiday mode (HOL): Holiday temperature control with a countdown
timer of the holiday mode period. "
5.4 Manual mode
To enter the manual mode, power on the thermostat, press “PRG” button
until the “MAN” sign shows on the thermostat. Now the thermostat will
operate in Manual mode. Adjust the desired temperature by pressing ”-”
and “+“."
5.5 Smart mode
5.5.1 Entering Smart mode
To enter Smart mode power on the thermostat, press “PRG” button until
the “PRG” sign shows on the thermostat. Now the thermostat will operate
in Smart mode. Adjust the desired temperature by pressing ”-” and “+“,
i.e you are adjusting the temperature setting of this current time zone for
6
Menu
Description
1
Timer setting- Minutes
2
Timer setting- Hours
3
Weekday settings
4
Temperature calibration (Range: -5℃to +5℃)
once. If you would like to permanently modify the setting, please follow
the next paragraph (5.5.2 Smart mode program setting)."
5.5.2 Smart mode program setting
a.) Long press “PRG” to start the program setting."
b). Press “-” or “+” button to set the time of the 1st period of Monday
Program (or weekday program under simple program setting-01)."
c). Press the “PRG” button again to confirm the time setting and the
screen will shift to the temperature setting of the 1st period of the
Program. "
d). Continue by pressing “PRG” button to shift to the time setting of the
2nd period. Repeat the above procedure to finish the settings of the
remaining 3 periods of the Program. And then move on to the setting of
the next day till Sunday to finish. "
To leave the settings in between, please press “Power” button."
5.6 Holiday mode
The Holiday mode on Smart1.0Pro is a useful feature that you can use in
order to avoid frozen or bursting water pipes during a prolonged leave. It
has a countdown timer of your holiday date and the remaining days of
your holiday will be shown on the thermostat. After the holiday period, the
thermostat will switch back to Manual or Smart mode as of your previous
settings."
5.6.1 Enter Holiday mode
Long press the “Holiday” button on the thermostat. The days setting of
the holiday period will start to flash, the screen on the thermostat will be
as shown below."
7
a). Adjust how many days you will leave on holiday by pressing “-” or “+”."
b). Press again the “Holiday button” to set the desired temperature during
your leave."
c). Press again the “Holiday button” to confirm the setting and enter
holiday mode."
5.6.2 Quit the Holiday mode
The thermostat will automatically shift back to the previous settings after
the set holiday period. However, if you need to shift back to your regular
mode before the set holiday time is over, press the “PRG” button to quit
Holiday mode."
5.7 Child lock
Press “SET” and “Holiday” buttons at the same time for 3 seconds to
activate child lock and the signal will show on the screen. Please press
again “SET” and “Holiday” buttons for 3 seconds to deactivate child lock."
8
6. Wi-Fi and APP operation
6.1 How to download the Sundirect Smart APP"
Scan the QR code on the right to start the download of
the APP, or you can download the APP “Sundirect Smart”
on the App Store or Google Playstore. Open the APP and
register with your phone number or Email address."
6.2 Connect to WiFi:
Step1: Connect Smart1.0Pro to the electricity, and make sure the Wi-Fi
signal on Smart1.0Pro is rapidly flashing (if not please power off
Smart1.0Pro and long press the “PRG” button until the Wifi signal is
flashing rapidly). Open the APP on your smart phone and add the device
by pressing “+” on the top right of the APP."
Step2: Enter the Wi-Fi password of your home network. Please make
sure your home Wi-Fi is working and keep the heater and smartphone/
tablet as close as possible to the Wi-Fi router. Please notice that our APP
only works with 2.4GHz network."
Step3: Wait until the connection status shows 100% to finish the setting.
The Wifi signal on the control box will stop flashing now. "
If you failed to connect, please power offSmart1.0Pro. Long press the
“PRG” button on the thermostat until the Wi-Fi signal is flashing slowly
and repeat the connection process."
9
7. Technical specifications
8. Warranty
Sundirect offers a 2-year manufacturing warranty on Smart1.0Pro."
Within the warranty period from the date of purchase, Sundirect will repair
or replace your Smart1.0Pro where the fault is due to defects in
workmanship or materials. Please contact your local Sundirect dealer in
the event of a warranty claim and return the control box together with
proof of purchase. "
The warranty covers the repair or replacement of the Smart1.0Pro only.
The removal of the serial number on the back of Smart1.0Pro will also
void this warranty. All labels shall not be removed. "
Any damages to Smart1.0Pro caused by the user are not covered by this
warranty. This includes scratches on the surface. Sundirect is not
responsible for any damages, losses or injuries due to the ingress of
water or moisture, accidental damage, mishandling, external impact,
repairs or adjustment by unauthorized persons."
10
Model
Smart1.0Pro
Frequency
433Mhz
Temperature range
5-40℃
Accuracy
+/-0.5℃
Protection
IP20
Andere Handbücher für Smart1.0
1
Inhaltsverzeichnis
Sprachen:
Andere Sundirect Thermostat Handbücher
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
