Sunjoy S-DN121-2-C2 Bedienungsanleitung

Sierra 6 PC Dining Chair-Stationary Chair

Instruction Manual

Item#: S-DN121-2-C2

SKU #: 810325099

CAUTION:Chair is for setting purpose only. Standing on or misuse of bench may result in

damage or injury. Not intended for commercial use. WEIGHT LIMIT 225 LBS (100 KG).

WARNING:

_ Keep all children and pets away from assembly area. Children and pets should be

supervised when they are in the area of the Chair construction.

_ Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,

overhanging branches, laundry line or electrical wires.

_ Some parts may contain sharp edges. When assembling and using this product, basic

safety precautions should always be followed to reduce the risk of personal injury and

damage to the product. Please read all instructions before assembly and use.

_ Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to

keep them secure!

Part

Description

Qty

Back

Left armrest

Right armrest

Seat board

Back cushion

Seat cushion

Bolt M6×20

M6 Spring washer

M6 Flat washer

Cap

Hex key M6

Foot pad

(pre-assembled)

Step 1: Attach seat board (D) to back (A) by bolt (AA), spring washer (BB), flat washer

(CC) and hex key (EE). Do not lock tightly. Put on cap (DD) after locking all bolts tightly.

Parts List

Step 3: Put bolt (AA) through

spring washer (BB), flat washer

(CC), attach armrest (B, C) to

back (A) by hex key (EE). Do not

lock tightly.

Step 4: Put seat cushion (F) onto seat

board, stick hook-and-loop fasteners,

put back cushion (E) on back.

Step 2: Attach armrest (B, C) to seat board (D)

by bolt (AA), spring washer (BB), flat washer

(CC) and hex key (EE). Lock all bolts tightly.

Then put on cap (DD).

Care & Maintenance

Before using, clean the Chair completely with a soft dry towel. When not in use, wipe free of

any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry

completely. Do not use strong detergent or abrasive cleaners. Over time nuts and bolts can

loosen. Occasionally, check nuts and bolts, re-tighten if necessary.

Exclusions:

Items used for commercial, contract, or other non-residential purposes, or items damaged due

to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or

rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for

warranty claims. Warranty is to the original purchaser and is non-transferable. Any

replacement of warranted items will be in the original style and color, or a similar style and

color if the original is unavailable or has been discontinued. As some states do not allow

exclusions or limitations on an implied warranty, the above exclusions and limitations may not

apply. This warranty gives you specific rights, and you may also have other rights, which vary

from state to state.

CUSTOMER SERVICE

Sunjoy Group warrants to the original purchaser that this item is free from defects in

workmanship and materials of your item provided the item was factory-sealed at the time of

purchase and is maintained with care and used only for personal, residential purposes. The

item is warranted to be free from defects in material or workmanship for a period of 1 year.

Should any manufacturing defect arise within this warranty period, Sunjoy Group will repair or

replace (at our option) any defective merchandise upon proof of purchase; however,

transportation and delivery costs, as well as labor and material charges to remove or replace

parts, remain the responsibility of the purchaser. A purchaser of an "open box,"

previously-returned, or "clearance" item, as well as original purchasers outside of the warranty

period, may obtain replacement parts from Sunjoy Group for products in current production, at

nominal cost.

If you are within the return policy that most stores have, you do have the option of returning

this item back to the store which you bought it from for an exchange of the same item, or a

refund of the purchase.

If you are within or beyond the return policy that most stores have, and need tech. assistance

or replacement parts, please call Sunjoy Group at 1(866) 578-6569 from 8:00 am to 8:00 pm

eastern standard time or e-mail to [email protected] or fax your parts replacement

order form together with the purchase receipt to 1 (740) 283-3549 for assistance.

Sierra 6 PC Dining Chair-Swivel Chairs

Instruction Manual

Item#: S-DN121-2-C2

SKU #: 810325099

CAUTION:Chair is for setting purpose only. Standing on or misuse of bench may result in

damage or injury. Not intended for commercial use. WEIGHT LIMIT 225 LBS (100 KG).

WARNING:

_ Keep all children and pets away from assembly area. Children and pets should be

supervised when they are in the area of the Chair construction.

_ Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,

overhanging branches, laundry line or electrical wires.

_ Some parts may contain sharp edges. When assembling and using this product, basic

safety precautions should always be followed to reduce the risk of personal injury and

damage to the product. Please read all instructions before assembly and use.

_ Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to

keep them secure!

Part#

Description

Qty

Back

Left armrest

Right armrest

Seat board

Base

Back cushion

Seat cushion

Bolt M6×20

M6 Spring washer

M6 Flat washer

Screw M8*40

Screw M8*35

(pre-assembled)

M8 Nut( pre-assembled 4)

M8 Spring washer

( pre-assembled 4)

M8 Flat washer

( pre-assembled 4)

Big washer

(pre-assembled 2)

Spring steel plate

(pre-assembled)

Cap

Wrench M8

Hex key M6

Foot pad

(pre-assembled on E)

Step 1: Attach seat board (D) to back (A) by bolt (AA), spring washer (BB), flat washer

(CC) and hex key (MM). Do not lock tightly. Put on cap (KK) after locking all bolts tightly.

Parts List

Step 3: Put bolt (AA) through spring washer

(BB), flat washer (CC), attach armrest (B, C) to

back (A) and hex key (MM). Do not lock tightly.

Step 2: Attach armrest (B, C) to seat board (D) by bolt (AA), spring

washer (BB), flat washer (CC) and hex key (MM). Put on cap (KK) after

locking all bolts tightly.

Step 5: Put seat cushion (G) onto seat board, stick hook-and-loop fasteners, put

back cushion (F) on back.Assembly finished.

Step 4: Put hole of base (E) and hole of assembled frame A (BCD) on the same line, put screw

(DD) through big washer (II), spring steel plate (JJ), big washer (II), flat washer (HH), spring

washer (GG), attached nut (FF) by wrench (LL). Lock all bolts tightly by wrench (LL).