Sunjoy Vineyard L-BS507SAL Bedienungsanleitung

Vineyard 3pc Bistro Set - Rocking Chair

Item # L-BS507SAL

Congratulations on your purchase of our SUNJOY Vineyard 3pc Bistro Set. Our clear, easy

to follow, step-by-step instructions will guide you through the assembly process from start

to finish.

WARNING:

Keep all children and pets away from assembly area. Children and pets should be

supervised when they are in the area of the chair construction.

Keep assembly area at least 6 feet from any obstruction such as a fence, garage,

house, overhanging branches, laundry line or electrical wires.

Some parts may container sharp edges. When assembling and using this product,

basic safety precautions should always be followed to reduce the risk of personal

injury and damage to the product. Please read all instructions before assembly and

use.

For outdoor use only.

Check all bolts for tightness before use, and periodically check and tighten bolts as

necessary.

IMPORTANT

Please take time to read these instructions thoroughly and follow each step carefully for safe and

easy operation. Keep this manual for future reference.

For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569

from 8:30AM to 5:30PM EST

or email us at sams

sun

rou

.com for assistance.

Part List

No Description Qty Image

A Chair Rest 1

B Chair Base 1

C Foot Cap (Pre-assembled on Part B) 6

D Bolt 4

E Nut (Four nuts are pre-assembled on Parts A, J) 8

F Split Washer (Four Split Washers are

pre-assembled on Parts A, J) 8

G Flat Washer (Four Flat Washers are

pre-assembled on Parts A, J) 8

H T Frame (Pre-assembled on Part B) 1

I Square Washer (Four square washers are

pre-assembled on Parts A, J) 6

J Fiberboard (Pre-assembled on part A) 2

K Bolt (Pre-assembled on Parts A，J）4

L Plastic Base Cover (Pre-assembled on Parts B）1

M Wrench 1

Assembly Steps:

Attach the chair rest A to the Fiberboard J and the T Frame H of the Chair Base B using the

Square Washer I, and the Bolt D.

Connect together using the Flat Washer G, the Split Washer F, and the Nut E; then tighten

firmly using Wrench M.

Care &Maintenance

Before using, clean the chair completely with a soft dry towel. Do not place your chair in wet conditions where

there is a risk of rust developing. When not in use, wipe free of any dirt or loose objects, wash with a mild solution

of soap and water; rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. When

not in use, store in a cool, dry location away from sunlight.

Limited Warranty:

Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and

materials for a period of 1 year from the date of purchase, provided the item was factory-sealed at the time of

purchase and is maintained with care and used only for personal, residential purposes. Should any manufacturing

defect arise within this warranty period, Sunjoy Industries will repair or replace (at our option) any defective

merchandise upon proof of purchase; however, transportation and delivery costs, as well as payments to a third

party for assembly or disassembly of the item, remain the responsibility of the purchaser. A purchaser of an "open

box," previously-returned, or "clearance" item, as well as original purchasers outside of the warranty period, may

obtain replacement parts from Sunjoy Industries for products in current production, at nominal cost.

Exclusions:

Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,

vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof

of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is

non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and

color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations

on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights,

and you may also have other rights, which vary from state to state.

Vineyard 3pc Bistro Set - Table

Item # L-BS507SAL

Congratulations on your purchase of our SUNJOY Vineyard 3pc Bistro Set. Our clear, easy

to follow, step-by-step instructions will guide you through the assembly process from start

to finish.

WARNING:

Keep all children and pets away from assembly area. Children and pets should be

supervised when they are in the area of the table construction.

Keep assembly area at least 6 feet from any obstruction such as fence, garage, house,

overhanging branches, laundry line or electrical wires.

Some parts may container sharp edges. When assembling and using this product,

basic safety precautions should always be followed to reduce the risk of personal

injury and damage to the product. Please read all instructions before assembly and

use.

Check all bolts for tightness before use, and periodically check and tighten bolts as

necessary.

IMPORTANT

Please take time to read these instructions thoroughly and follow each step carefully for safe and

easy operation. Keep this manual for future reference.

For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569

from 8:30AM to 5:30PM EST

or email us at sams

sun

rou

.com for assistance.

Part List

No Description Qty

A Umbrella Cap 1

B Table Top 1

C Left side panel 1

D Right side panel 1

E Umbrella Tube 1

F Base 1

AA Split Washer M6 8

BB Spring washer M6 8

CC Bolts M6×20 8

DD Flat washer M12 1

EE Nut M12 1

FF Wrench M6 1

GG Wrench M12 1

HH Footpad

(pre-assembled onto F) 4

II Adjustable knob

（pre-assembled onto E）1

Step1:

Attach Right Side panel D onto the Base F,

tighten with bolt CC, flat washer AA, and

split washer BB. Repeat the same process

for the Left Side panel C.

Step 2:

Fasten the Umbrella Tube E into Nut EE on

Base F, tighten with flat washer DD, (Tool

needed: Wrench GG)

Care &Maintenance

Before using, clean the table completely with a soft dry towel. Do not place your table in wet conditions where