Sunjoy D-GZ841PST-E Bedienungsanleitung

Assembly Instructions

Item# D-GZ841PST-E (PC Top)

Congratulations on your purchase of our SUNJOY 12’x10’ Hardtop Gazebo. Our clear, easy to

follow, step-by-step instructions will guide you through the assembly process from start to

finish.

WARNING:

●This unit is heavy. Do not assemble this item alone. 6-8 people are recommended for safe

assembly.

●Keep all children and pets away from assembly area. Children and pets should be supervised

when they are in the area of the Gazebo construction.

●Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,

overhanging branches, laundry line or electrical wires.

●Some parts may contain sharp edges. When assembling and using this product, basic safety

precautions should always be followed to reduce the risk of personal injury and damage to the

product. Please read all instructions before assembly and use.

●Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.

●Assemble on level ground.

IMPORTANT

Please take time to read these instructions thoroughly and follow each step carefully for safe and easy

operation. Keep this manual for future reference.

For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569 from

8:30AM to 5:30PM EST, or email us at customer.care@sunjoydirect.com, or visit www.sunjoydirect.com

for assistance.

Post

Beam connector

Base cover

Base

Slanting bar connector

Lower connector

Ｆ

Lower beam

connector

Short beam

Ｇ1

Long beam

Supporter bar

Long top bar

Corner frame

Slanting beam

Middle beam 1

Middle beam 2

PC piece 1

PC piece 2

PC piece 3

PC piece 4

PC piece 5

PC piece 6

PC piece 7

Parts List

Brace 1

Brace 2

Brace 3

Brace 4

Brace 5

Left rail

Right rail

Middle rail

Center plate

Corner plate

Hook

Small top connector

Cover

Small slanted beam

Netting tube 1

Netting tube 2

Netting tube 3

Netting tube 4

Cover flap 1

Cover flap 2

Cover flap 3

M6X15 Screw

16 PCS

M6 Flat washer

144 PCS

Nut

16PCS

M6X15 Bolt

64 PCS

M6X70 Bolt

16 PCS

M6X45 Bolt

32 PCS

M6 Wrench

2 PCS

Hardware Pack 1

Fig.1: Fix beam connector (B) to

post (A) by using bolts (FF) and

flat washers (BB)

Fig.2: Fix slanting bar connector

(E) to post (A) by using bolts (FF)

and flat washers (BB)

Fig.3: Attach base (D) to post (A)

by using screws (AA) and flat

washers (BB). Cover the base (D)

by base cover (C)

Hardware Pack 2

M6X15 Screw

24 PCS

M6 Flat washer

80 PCS

M6X15 Bolt

4 PCS

Nut

16 PCS

M6X20 Bolt

20 PCS

M6X60 Screw

16 pcs

Fig.4: Fix lower connector (F) and

lower beam connector (F1) onto short

beam / long beam (G1/G2) by using bolts

(GG), flat washers (BB), nuts (DD).

Fig.5: Connect short beam/long

beam (G1/G2) to beam connector

(B) by using bolts (FF) and flat

washers (BB)

Fig.6: Fix supporter bar (H) to post

(A) and short beam/long beam

(G1/G2) by using bolts (II) and flat

washers (BB).

Fig.7: Fix Slanting

beam (J) to corner

frame (I2) by using

bolts (EE) and flat

washers (BB).

Fig.8:Connect cover flap 3 (X3) to

the lower end of Slanting beam

(J) and fix Slanting beam (J),

cover flap 3 (X3), top connector

(E) by using bolts (JJ), nuts (DD),

flat washers (BB).

Fig.9: Attach middle beam

1 (K1) to (I2) by using by

using bolts (EE) and flat

washers (BB)

Fig.10: Connect cover flap 1 (X1)

to middle beam 1 (K1), and fix

cover flap 1 (X1) to middle beam

1 (K1), lower connector (F) by

using screws (JJ), nuts (DD), flat

washers (BB).

Fig.11: Attach the upper side of middle beam 2

(K2) to long top bar (I1) by using bolts (EE), flat

washers (BB)

Fig.11-1: Attach the lower side of

middle beam 2 (K2) to lower

connector (F) by using bolts (JJ),

flat washers (BB), nuts (DD)

Fig.14: Fig.14: Fix

small slanted beam (U)

and corner frame (I2)

by using bolts (FF), flat

washers (BB).

Fig.13: Connect cover flap

(X2) to small slanted beam

(U) and fix small slanted

beam (U), cover flap 2 (X2),

small top connector (S) by

using screws (JJ), nuts (DD),

flat washers (BB)

Fig.15: Insert and screw

the hook (R) tightly into

the corresponding hole

on the small top

connector (S).

Fig.6-1: Insert long top bar (I1) into corner frame (I2) and fix them by using bolts (AA) and flat washers (BB).

Fig.12-1: Attach netting

bar1/2/3/4(W1/W2/W3/W4) to

middle beam 1/2 (K1/K2) by

using bolts (AA), flat washers

(BB).

Fig.12-1: Attach netting

bar1/2/3/4(W1/W2/W3/W4) to

middle beam 1/2 (K1/K2) by

using bolts (AA), flat washers

(BB).

Fig.12-2: Fix the other side

of netting bar 1/2/3/4

(W1/W2/W3/W4) to

Slanting beam (J) by using

bolts (AA), flat washers

(BB).

Hardware Pack 3

M6X15 Screw

14 PCS

M6 Flat washer

16 PCS

M6X60Bolt

2 PCS

Fig.16: Insert the PC piece

(M6/M7) into the rail on the

small slanted beam (U).

Fig.17: Insert the Brace 4 / Brace 5 (O1 and

O2) into the lower of the PC piece 6/7 (M6

and M7), then secure the corner plate (Q2)

to the small slanted beam (U) through three

holes with screws (AA) and flat washers

(BB).

Fig.18: Secure the cover (T) to the

small top connector (S) with bolts

(HH) and flat washers (BB)

Fig.19: Insert the PC piece 3/4

(M3/M4) into the middle beam

(K1/K2) and slanted beam (J),

then insert the rails (P1/P2)

into it. Insert the PC piece 1/2

(M1/M2) into the middle beam

(K1/K2) and slanted beam (J).

Repeat this step to install the

right roof pieces.

Fig.20: Insert the PC

piece 5 (M5) into the

middle beam 2 (K2);

then insert the middle

rail (P3) into it. Insert the

PC piece (M5) into the

middle beam 2 (K2).

Fig.21: Insert the Brace

1/2/3 (N1, N2 and N3) into

the lower of PC pieces; then

secure the center plate (Q1)

to the middle beam 2 (K2)

through three holes with

screws (AA) and flat

washers (BB).

Fig.22: Secure the

corner plate (Q2) to

the slanted beam (J)

through three holes

with screws (AA) and

flat washers (BB).

Hardware Pack 4

Φ8X180 stake

16 PCS

Fig.23: Secure the whole

gazebo to the ground with

stakes (KK).

IMPORTANT:

1. Keep all children and pets away from assembly area. Children and pets should be

supervised while gazebo is being assembled.

2. The assembled gazebo should be located at least 6 feet (2 m) from any obstruction such as

a fence, garage, and house, overhanging branches, laundry lines or electrical wires.

3. This unit is heavy. Do not assemble this item alone. Six people are recommended for safe

assembly.

4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.

5. When assembling and using this product, basic safety precautions should always be

followed to reduce the risk of personal injury and damage to equipment. Please read all

instructions before assembly and use.

6. For outdoor use only. Install on level ground. 16 stakes are provided to secure the gazebo in

the ground. If you wish to secure the pavilion to a wood deck or concrete surface, use 16

anchors suited for these surfaces (anchors not included).

7. Check all bolts for tightness before and during usage.

8. Please check your state and local regulations prior to purchasing. Some jurisdictions may

require permits for installation and use. Some special procedures may be valid in your area.

9. While this gazebo is manufactured to withstand strong force winds through only the supplied

ground stakes, securing the gazebo to a deck, concrete patio or a stronger base, in areas

subject to frequent severe weather should be considered.

NOTE: The gazebo’s roof and structure are not guaranteed against extreme weather

conditions (storms, high winds, etc.). If the gazebo is not dismantled for the winter, snow must

be cleaned off regularly. Any damage caused by snow accumulation is not covered by the

warranty.

Limited Warranty:

This limited warranty is extended to the original purchaser and applies to defects in materials

and workmanship of your item provided the item is maintained with care and used only for

personal, residential purposes.

The item is warranted to be free from defects in material or workmanship for a period of one (1)

year. We don't reimburse for transportation or delivery costs, or compensate the individual or

any outside party for assembling or disassembling the product.

Exclusions:

Items used for commercial, contract, or other non-residential purposes, or items damaged due

to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or

rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for

warranty claims. Warranty is to the original purchaser and is non-transferable. Any

replacement of warranted items will be in the original style and color, or a similar style and

color if the original is unavailable or has been discontinued. As some states do not allow

exclusions or limitations on an implied warranty, the above exclusions and limitations may not

apply. This warranty gives you specific rights, and you may also have other rights, which vary

from state to state.

Maintenance:

Our iron/steel components for garden accessories and patio items are coated with rust

inhibiting paint that protects it from rusting. However, due to the nature of iron, surface

oxidation (rusting) will occur once these protective coatings are scratched. This is a natural

process and is not a defect! To minimize this condition, we recommend care when assembling

& handling the product to prevent scratching the paint. Should any scratching or damage occur,

we recommend immediate touch-up with rust inhibiting paint. Surface rust can also be easily

removed with a very light application of common cooking oil. If surface oxidation (rusting)

occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or

patio and cause damaging stains, which may be difficult to remove. This can be prevented if

measure is taken to keep the product from oxidizing.

Important: For technical assistance on assembly or replacement parts. Please call Sunjoy

Industries at 1(866) 578-6569 from 8:30 AM to 5:30 PM EST Monday to Friday or fax the

replacement part form which is in the box to (740)-283-3549 or Email

customer.care@sunjoydirect.com for assistance.

Made in China

Andere Sunjoy Gartenmöbel Handbücher

Sunjoy

Sunjoy D-GZ840PST-AS-16S Bedienungsanleitung

Sunjoy

Sunjoy L-GZ215PST-1E Bedienungsanleitung

Sunjoy

Sunjoy D-GG001PST-F1 Bedienungsanleitung

Sunjoy

Sunjoy L-BS630SST Bedienungsanleitung

Sunjoy

Sunjoy A101010800 Bedienungsanleitung

Sunjoy

Sunjoy A1020073 Bedienungsanleitung

Sunjoy

Sunjoy A102007300 Bedienungsanleitung

Sunjoy

Sunjoy A106005500 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ076PST-1 Bedienungsanleitung

Sunjoy

Sunjoy A102007500 Bedienungsanleitung

Sunjoy

Sunjoy A102009100 Bedienungsanleitung

Sunjoy

Sunjoy L-DN1210SST-E-T Bedienungsanleitung

Sunjoy

Sunjoy L-GZ238PST-10 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ1080PCO Bedienungsanleitung

Sunjoy

Sunjoy 243341 Bedienungsanleitung

Sunjoy

Sunjoy A102008122 Bedienungsanleitung

Sunjoy

Sunjoy A103000106 Bedienungsanleitung

Sunjoy

Sunjoy A102007202 Bedienungsanleitung

Sunjoy

Sunjoy A106005600 Bedienungsanleitung

Sunjoy

Sunjoy L-GG030PST-B Hardtop Grill Gazebo Bedienungsanleitung

Sunjoy

Sunjoy A102032621 Bedienungsanleitung

Sunjoy

Sunjoy PINEHURST L-GZ1188PST Bedienungsanleitung

Sunjoy

Sunjoy LAKEWOOD L-GZ669PST-Y1 Bedienungsanleitung

Sunjoy

Sunjoy A102007200 Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

OLT

OLT 24 Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung