Sunjoy L-GZ1080PCO Bedienungsanleitung

Assembly Manual

Item#: 110102080

Vendor code: L-GZ1080PCO

Thank you for your purchase! We are pleased that you have chosen Sunjoy for your outdoor

furniture purchase.

Our clear, easy to follow, step by step instructions will guide you through the project from start

to finish

Safety information

when they are in the area of the production construction.

overhanging branches, laundry line or electrical wires.

your product is essential. Do not place the product underneath electrical

lines.

ng and using this product, basic safety precautions should always be followed

to reduce the risk of personal injury and damage to equipment. Please read all instructions

before assembly and use.

re that all connectors and poles

are firmly and fully secured into position. It is important to do so before use so as to avoid a

possible collapse or damage to the item, which could also result in injury.

nstall on flat, level ground.

to a wood deck or concrete surface, you will need to purchase fasteners appropriate (such as

expansion bolt) for these surfaces. These are readily available at your local hardware store or

home center.

(storms, high winds, etc.). If the gazebo is not dismantled for the winter, snow must be cleaned

off regularly. Any damage caused by snow accumulation is not covered by the warranty.

lightening.

h wind, as possible damage will

occur to the structure. Remove fabric roof and secure screen & privacy panels.

dictions may

require permits for, or otherwise regulate, installation and use.

Assembly Preparation

product. Keep this manual for future reference.

iginal packaging to store the product.

assemble the product if any parts are missing.

T included): Screwdriver, a hammer, and 2 ladders that are

at least 2.4 m / 7.8 ft in height,

four or more people are

recommended for safe assembly.

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-578-0101 (English, French & Spanish in US) from 8:00 AM

Eastern time to 8:00 PM Eastern time, Monday Friday or email to service@ferro-works.com.

Description Part# Label Qty

Image

Post GZ1080XXX01 A 4

Left cross beam of long

side GZ1080XXX02 B1 2

Right cross beam of long

side GZ1080XXX03 B2 2

Left cross beam of shot

side GZ1080XXX04 B3 2

Right cross beam of shot

side GZ1080XXX05 B4 2

Parts List

Description Part# Label Qty Image

Beam connector GZ1080XXX06 C 4

Corner

cover(Outside) GZ1080XXX07 D 4

Corner

cover(Inside) GZ1080XXX08 E 4

Middle beam

connector GZ1080XXX09 F 6

Slanting bar

connector GZ1080XXX10 G 4

Left decorative bar

of long side GZ1080XXX11 H1 2

Right decorative

bar of long side GZ1080XXX12 H2 2

Left decorative bar

of short side GZ1080XXX13 H3 2

Right decorative

bar of short side GZ1080XXX14 H4 2

Top frame GZ1080XXX15 I 1

Top frame cover GZ1080XXX16 J 1

Slanting bar GZ1080XXX17 K1 4

Middle bar GZ1080XXX18 K2 6

Hook GZ1080XXX19 L 1

Left small PC panel

GZ1080XXX20 M1 4

Left big PC panel GZ1080XXX21 M2 4

Middle PC panel GZ1080XXX22 M3 4

Right small PC

panel GZ1080XXX23 M4 4

Description Part# Label Qty Image

Right big PC panel GZ1080XXX24 M5 4

Long bar cover GZ1080XXX25 O1 8

Short bar cover GZ1080XXX26 O2 2

Left lock plate of

lower slanting bar GZ1080XXX27 P1 4

Right lock plate of

lower slanting bar GZ1080XXX28 P2 4

Left lock plate of

lower middle bar GZ1080XXX29 P3 6

Right lock plate of

lower middle bar GZ1080XXX30 P4 6

Decorative slot

connector GZ1080XXX31 Q 4

Left PC panel

connector GZ1080XXX32 R1 4

Right PC panel

connector GZ1080XXX33 R2 4

Middle PC panel

connector GZ1080XXX34 R3 2

Post base GZ1080XXX35 S 4

Base cover GZ1080XXX36 T 4

Left arch support bar

GZ1080XXX37 U1 4

Right arch support

bar GZ1080XXX38 U2 4

Description Part# Label Qty Image

M6*15 Bolt BM06015C AA 92

M6 Washer UD06C BB 108

M6*15 Screw SM06015C CC 16

M6 Wrench W10D Z1 2

Hardware Pack 1

Fig.1: Raise up the Base cover(T)and then attach the Post base(S) to the Post(A) by using Screw(CC) and

Washer(BB).

Fig.2-1 Attach the Left cross beam of long side (B1) and Right cross beam of long side (B2) to Beam

connector(C) by Bolt (AA) and Washer (BB).

Fig.2-2 Attach the Left cross beam of short side (B3) and Right cross beam of short side (B4) to Beam

connector(C) by Bolt (AA) and Washer (BB).

Description Part# Label Qty Image

M6*15 Bolt BM06015C AA 32

M6 Washer UD06C BB 32

Hardware Pack 2

Fig.3-1 Attach the Middle beam connector (F) to the Left cross beam of short side (B3) and Right cross

beam of short side (B4) by Bolt (AA) and Washer (BB).

Fig.3-2 Attach the Middle beam connector (F) to the Left cross beam of long side (B1) and Right cross beam

of long side (B2) by Bolt (AA) and Washer (BB).

Fig.4 Attach the assembled cross beam (B1) and (B3) to the Post (A) by Bolt (AA) and Washer (BB), Use

the same way to assemble the cross beam (B3) and (B4).

Fig.5 Attach the Slanting bar connector (G) to the cross beam of long side (B1/B2) and cross beam of short

side (B4/B3) by Bolt (AA) and Washer (BB).

Fig.6 Attach the arch support bar(U1,U2) to the cross beam(B1 B2 B3 B4) and Post (A) by Bolt (AA)

and Washer (BB).

Hardware Pack 3

Description Part# Label Qty Image

M6*15 Bolt BM06015C AA 70

M6 Washer UD06C BB 74

M6*45 Bolt BM06045C FF 4

8*260 Stake DD08260C II 16

Fig.9 Attach the upper end of the Middle bar (K2) to the Top frame (I) by Bolt (AA) and Washer (BB).

Fig.10 Attach the lower end of the Middle bar (K2) to the Middle bar connector (F) by Bolt (AA) and

Washer (BB).

Fig.11 Attach the Top frame cover (J) to the Top frame (I) by Bolt (AA) and Washer (BB), then screw

the Hook (L) to the Top frame (I).

Fig.7 Four people and two ladders are needed to assemble during this step.

Note1: Two people to assemble the upper end of slanting bar, another two people to assemble the lower

end of the slanting bar.

Note2: Assemble the middle bar by the same way.

Fig.7-1 Attach the upper end of the Slanting bar (K1) to the Top frame (I) by Bolt (AA) and Washer (BB).

Fig.8 Attach the lower end of the Slanting bar (K1) to the Slanting bar connector (G) by Bolt (AA) and

Washer (BB).

Fig.12 Insert the left small PC panel (M1) to the slot of the Slanting bar (K1) and Middle bar (K2). Assemble

the Right small PC panel (M4) and the Middle PC panel (M3) by the same way.

Fig.13 Insert the Left PC panel connector (R1) into the slot of Slanting bar (K1) and Middle bar (K2).

Assemble the Right PC panel connector (R2) and Middle PC panel connector (R3) by the same way.

Fig.14 Insert the Left big PC panel (M2) to the slot of the Slanting bar (K1) and Middle bar (K2). Assemble the

Right big PC panel (M5) and the Middle PC panel (M3) by the same way.

Fig.15 Attach the Right lock plate of lower slanting bar (P2) to the Slanting bar connector (G) by the Bolt (AA)

and Washer (BB). Attach the Left lock plate of lower slanting bar (P1) to the Slanting bar connector (G) by the

same way.

Fig.16 Attach the Left lock plate of lower middle bar (P3) to the Middle beam connector (F) to keep the Left

big PC panel (M2) stable by Bolt (AA) and Washer (BB). Use the same way to assemble the Middle PC

panel (M3) by Left lock plate of lower middle bar (P3) and Right lock plate of lower middle bar (P4). Make

sure all the Bolts are screwed tightly.

Fig.18-1: Attach the Left decorative bar of long side (H1) and Right decorative bar of long side (H2) to the

Middle bar (K2) by Bolt (AA) and Washer (BB).

Fig.18-2: Attach the Right decorative bar of short side (H4) to the Middle bar (K2) by Bolt (AA) and Washer

(BB).

Fig.19: Attach the Decorative slot connector (Q) to the Left decorative bar of short side (H3) and Right

decorative bar of short side (H4) by Bolt (AA) and Washer (BB). Attach the connector (Q) to decorative bar

(H1) and (H2) by the same way.

Fig.17-1 Attach the Left decorative bar of long side (H1) to the Right decorative bar of long side (H2) as

the fig.17-1 shows. Assemble the decorative bar H3 & H4 by the same way.

Fig.17-2.Attach the decorative bar(H1, H2, H3, H4) to the cross beam (B1 B2 B3 B4) as the fig.17-2

shows. (Note: Two people are needed during this step.)

Fig.20-1: Attach the Short bar cover (O2) to the connecting part of Left decorative bar of long side (H1) and

Right decorative bar of long side (H2) by Bolt (AA) and Washer (BB).

Fig.20-2: Attach the Long bar cover (O1) to the decorative bar (H1/H3) and decorative bar (H2/ H4) as the

Fig.20-2 shows.

Fig.21: Put Corner cover (Outside) (D) through Post (A) to the corner of decorative bar (H1/H3) and

decorative bar (H4/H2), fix them by Bolt (FF) and Washer (BB).

Fig.22 Attach the Corner cover (Inside) (E) to the Post (A) by Bolt (AA) and Washer (BB).

Fig.23 Fix the assembled gazebo to the ground by using Stakes (II).

Inhaltsverzeichnis

Andere Sunjoy Gartenmöbel Handbücher

Sunjoy

Sunjoy D-GG038PST Bedienungsanleitung

Sunjoy

Sunjoy A102008700 Bedienungsanleitung

Sunjoy

Sunjoy Hampshire L-GZ029PST Bedienungsanleitung

Sunjoy

Sunjoy A202000400 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ339PAL Bedienungsanleitung

Sunjoy

Sunjoy L-GZ1048PCO-A Bedienungsanleitung

Sunjoy

Sunjoy A102007602 Beilage

Sunjoy

Sunjoy L-GZ1140PST-A Bedienungsanleitung

Sunjoy

Sunjoy A102008011 Bedienungsanleitung

Sunjoy

Sunjoy A102007700 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ822PCO Bedienungsanleitung

Sunjoy

Sunjoy A106005700 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ1095PST-B Bedienungsanleitung

Sunjoy

Sunjoy 110211018-K Bedienungsanleitung

Sunjoy

Sunjoy L-GZ288PST-4D Bedienungsanleitung

Sunjoy

Sunjoy L-GZ212PCO-B1 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ375PST Bedienungsanleitung

Sunjoy

Sunjoy G-GZ107PST Bedienungsanleitung

Sunjoy

Sunjoy A104004210 Bedienungsanleitung

Sunjoy

Sunjoy A111500500 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ702PST Bedienungsanleitung

Sunjoy

Sunjoy A102008000 Bedienungsanleitung

Sunjoy

Sunjoy L-DN1196SAL-RC Bedienungsanleitung

Sunjoy

Sunjoy A102009800 Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

OLT

OLT 24 Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung