Sunjoy D-GZ842PST-AS-235 Bedienungsanleitung

Assembly Instruction

NS#:110102017/110102021

Item#:D-GZ842PST-AS-135 (Black Top) / D-GZ842PST-AS-235 (Faux

Copper Top)

Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start

to finish. The final product will be a quality piece that will go together smoothly and give years

of enjoyment. All you will need is a screwdriver, a hammer and two

ladders (not included)

whose height is no less than 2.5m.

Note: THIS UNIT IS HEAVY!

Do NOT assemble this item alone for safety. Six people are necessary.

Item Identification: For ease of identification, all parts are labeled to correspond to the Step

number in which the part is used.

Parts List

Gutter A 6

Corner cover A1 6

Beam connector B 6

Arc support tube C 6

Post 1 D1 3

Post 2 D2 3

Baffle E 6

Centre hook F 1

Screen 1 G1 1

Screen 2 G2 2

Small beam 1 H1 6

Small beam 2 H2 6

Small beam 3 H3 6

Small beam 4 H4 6

Big roof cladding 1 I1 6

Big roof cladding 2 I2 6

Big roof cladding 3 I3 6

Big roof trim cap J 6

Big roof beam K 6

Roof connection L 1

Small roof bar M 6

Small roof cladding

N 6

Small roof trim cap

O 6

Second roof top

connector P 1

Second roof cover Q 1

Flower basket R 2

Basket side frame S 4

Slate top T 1

Slate top support U 2

Right-angle support

V 2

Curtain tube W 6

Gutter connector X 6

Hardware Pack 1

AA M6 x 35 Bolt 6 PCS

BB M6 Flat washer 48 PCS

CC M6 x 20 Blot 42 PCS

Z1 M6 Wrench 2 PCS

Hardware Pack 2

BB M6 Flat washer 108 PCS

DD M6 x 55 Screw 30 PCS

CC M6 x 20 Bolt 12 PCS

FF M6 Nut 18 PCS

GG M6 x 15 Screw 66 PCS

HH M10 Rounded nut 1 PCS

II M10 Flat washer 1 PCS

Z2 M10 Wrench 1 PCS

Fig.1: Insert gutter connector (X) to gutters (A) and tighten with flat washer (BB) and bolt (CC) as showed in Fig.1.

Fig.1-1: Attach the corner cover (A1) to the gutter connector (X) with bolt (AA) and flat washer (BB).

Fig.2: Connect the beam connector (B) to the gutter (A) with bolt (CC) and flat washer (BB).

Fig.2-1: Attach the curtain tube (W) to the gutter (A)

using bolt (CC) and flat washer (BB).

Fig. 3: Connect the bottom of the big roof beam (K) and the beam connector (B) using screw (DD), flat washer (BB)

and nut (FF).

Fig. 4: Connect the top of the big roof beam (K) with roof connection (L) using bolt (CC) and flat washer (BB).

Fig. 5: Connect the small beam 1 (H1), small beam 2 (H2), small beam 3 (H3) and small beam 4 (H4) to the big roof

beam (K) from top to bottom using screw (GG) and flat washer (BB).

Fig. 6-1: Attach the centre hook (F) to the top connector for the second roof (P).

Fig. 6-2: Connect one end of the small roof bar (M) to the second roof top connector (P) using screw (DD) flat

washer (BB) and nut (FF).

Fig. 7: Attach the other end of the small roof bar (M) to roof connection (L) using screw (GG) and flat washer (BB).

Fig.

6-1 P

Hardware Pack 3

BB M6 Flat washer 78 PCS

CC M6*20 Bolt 66 PCS

KK M6*45 Bolt 12 PCS

Fig. 8: Attach the small roof cladding (N) to the small roof bar (M) tighten with screw (GG) and flat washer (BB).

Fig. 9:Attach the small roof trim cap (O) to the small roof bar (M) tighten with screw (DD) and flat washer (BB).

Fig.10: Attach the second roof cover (Q) to the small roof using rounded nut (HH) and flat washer (II). Tighten the nut

using the M10 wrench (Z2).

Fig.11: Attach the post 1 (D1) and post2 (D2) to the gutter (A) using bolt (CC) and flat washer (BB).

Fig.12: Attach the baffle (E) to the gutter (A) using bolt (CC) and flat washer (BB). This step requires 4 people.

Fig.13: Attach the screens (G1, G2) between post (D1) and post (D2), tighten with bolt (KK) and flat washer (BB).

Fig. 14:Insert the opposite ends of the arc support tube (C) into the respective posts (D1, D2) and secure the arc

support tube with bolt (CC) and flat washer (BB).

Fig. 15: Attach the arc support tube (C) to the gutter (A) using bolt (CC) and flat washer (BB).

Hardware Pack 4

BB M6 Flat washer 48 PCS

DD M6*55 Screw 12 PCS

GG M6*15 Screw 36 PCS

Fig

Fig.16: Place the big roof cladding (I1, I2, I3) over the big roof structure

and tighten the claddings to the big roof beam (K) using screw

(GG) and flat washer (BB).

Fig.17: Attach the big roof trim cap (J) to the big roof beam (K) using

screw (DD) and flat washer (BB).

Fig.17-1: Insert the positioning pin of big roof trim cap (J) to small roof

bar (M)

Hardware Pack 5

BB M6 Flat washer 36 PCS

EE M6*15Bolt 12 PCS

NN M6*25 Bolt 24 PCS

MM Φ8*180 Lawn stake 12 PCS

1. Keep all children and pets away from assembly area. Children and pets should be

supervised when they are in the area of gazebo construction.

IMPORTANT:

2. The area for assembly should not be less than 6 feet from any obstruction such as fence,

garage, house, overhanging branches, laundry line or electrical wires.

3. This unit is heavy. Do not assemble this item alone. Six people are recommended for safe

assembly.

4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.

5. When assembling and using this product, basic safety precautions should always be

followed to reduce the risk of personal injury and damage to equipment. Please read all

instructions before assembly and use.

6. For outdoor use only. Install on level ground. Stakes are provided to secure the gazebo in

grass ground. If you wish to secure the gazebo to a wood deck or concrete surface, you will

need to purchase fasteners appropriate for these surfaces. These are readily available at your

local hardware store or home center.

7. Check all bolts for tightness before and during usage.

8. Please check your state and local regulations prior to purchasing. Some jurisdictions may

require permits for, or otherwise regulate, installation and use.

9. While this gazebo is manufactured to withstand gale force winds utilizing only the supplied

Fig. 18: Attach the basket side frames (S) to flower basket (R) and tighten with bolt (NN) and flat washer (BB).

Fig. 19: Attach the assembled flower basket to screen 2 (G2).

Fig. 20: Connect slate top support (U) post (D1) and slate top (T) using bolt (EE) and flat washer (BB).

Fig. 21: Connect the right-angle support (V) to screen 1 (G1) and slate top (T) using bolt (EE) and flat washer

(BB).

Fig. 22: Fix the assembled gazebo to the ground firmly using lawn stakes (MM).

ground stakes, in areas subject to frequent severe weather, securing the gazebo to a deck,

concrete patio or footings should be considered.

10. Your gazebo has been engineered to accommodate winter snow loads incurred in most

areas. Removal of accumulated snow on the gazebo roof with a roof rake is recommended.

In areas that are regularly subject to blizzard conditions however, removal of the roof panel is

suggested. The assembled roof structure can simply be left intact until warmer conditions

return.

Limited Warranty:

This limited warranty is extended to the original purchaser and applies to defects in materials

and workmanship of your item provided the item is maintained with care and used only for

personal, residential purposes.

The item is warranted to be free from defects in material or workmanship for a period of one (1)

year. We don't reimburse for transportation or delivery costs, or compensate the individual or

any outside party for assembling or disassembling the product.

Exclusions:

Items used for commercial, contract, or other non-residential purposes, or items damaged due

to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or

rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for

warranty claims. Warranty is to the original purchaser and is non-transferable. Any

replacement of warranted items will be in the original style and color, or a similar style and

color if the original is unavailable or has been discontinued. As some states do not allow

exclusions or limitations on an implied warranty, the above exclusions and limitations may not

apply. This warranty gives you specific rights, and you may also have other rights, which vary

from state to state.

Maintenance:

Our iron/steel components for garden accessories and patio items are coated with rust

inhibiting paint that protects it from rusting. However, due to the nature of iron, surface

oxidation (rusting) will occur once these protective coatings are scratched.

This is a natural

process and is not a defect! To minimize this condition, we recommend care when assembling

& handling the product to prevent scratching the paint. Should any scratching or damage occur,

we recommend immediate touch-up with rust inhibiting paint. Surface rust can also be easily

removed with a very light application of common cooking oil. If surface oxidation (rusting)

occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or

patio and cause damaging stains, which may be difficult to remove. This can be prevented if

measure is taken to keep the product from oxidizing.

Important: Please do not return this product to the store. For technical assistance on

assembly or replacement parts. Please call Sunjoy Industries at 1-866-578-6569 from 8:00 am

EST to 8:00 pm PST or fax the replacement part form which is in the box to 1-740-283-3549 or

Email customer.care@sunjoygroup.com for assistance.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sunjoy Gartenmöbel Handbücher

Sunjoy

Sunjoy A102007500 Bedienungsanleitung

Sunjoy

Sunjoy D-WA004PAL-B Bedienungsanleitung

Sunjoy

Sunjoy A102008110 Bedienungsanleitung

Sunjoy

Sunjoy Windsor L-GZ717PST-C Bedienungsanleitung

Sunjoy

Sunjoy A106000904 Bedienungsanleitung

Sunjoy

Sunjoy PINEHURST L-GG093PST-B Bedienungsanleitung

Sunjoy

Sunjoy A103002000 Bedienungsanleitung

Sunjoy

Sunjoy SHELTON A101001910 Bedienungsanleitung

Sunjoy

Sunjoy D-GZ844PCO-I1 Bedienungsanleitung

Sunjoy

Sunjoy D-GG038PST Bedienungsanleitung

Sunjoy

Sunjoy L-GZ1023PST-A Bedienungsanleitung

Sunjoy

Sunjoy L-GZ822PCO Bedienungsanleitung

Sunjoy

Sunjoy A101006500 Bedienungsanleitung

Sunjoy

Sunjoy A102007901 Beilage

Sunjoy

Sunjoy G-GZ006PWI Bedienungsanleitung

Sunjoy

Sunjoy S-UM277PST Bedienungsanleitung

Sunjoy

Sunjoy L-GZ098PST-1A Bedienungsanleitung

Sunjoy

Sunjoy Thrshd Madaga Gazebo 10x10 Bedienungsanleitung

Sunjoy

Sunjoy Bellevue L-GZ238PST-10-1 Bedienungsanleitung

Sunjoy

Sunjoy A102008122 Bedienungsanleitung

Sunjoy

Sunjoy Rona 38115107 Bedienungsanleitung

Sunjoy

Sunjoy A102005801 Bedienungsanleitung

Sunjoy

Sunjoy GZ-002P-WI Bedienungsanleitung

Sunjoy

Sunjoy Grandview L-DN2429SST-B-T Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

OLT

OLT 24 Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung