Sunjoy L-GG015PCO Bedienungsanleitung

20 December 2013 1

GRILL GAZEBO

ITM./ART. 966732

MODEL#L-GG015PCO

ASSEMBLY INSTRUCTIONS

IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.

Please check with your local governing authority / local municipal codes regarding installation of

structures before assembly.

Tools required (not included): Phillips screwdriver, hammer, 2 ladders that are at least 8.2 ft / 2.4 m in height, cordless

drill, socket, ratchet set (Metric), socket adapter and socket driver, carpenters’ level.

WARNING:

Check to ensure all parts are present prior to assembly.

This unit is heavy! 5 adults are needed for safe assembly ---- Never assemble this alone!

Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of

the gazebo construction.

Keep assembly area more than 6 ft /1.8 m from any obstruction such as fence, garage, and house, overhanging branches,

laundry line or electrical wires.

Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be

followed to reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and

use.

For outdoor use only. Check all bolts for tightness before use and periodically check and tighten bolts as necessary.

Assemble this unit on firm, level ground or hard surface only. Ensure the unit is level after final assembly.

Protect parts during assembly by laying them on a non-abrasive surface such as blankets or cardboard.

IMPORTANT

Please do not return this product to the store. For technical assistance or replacement parts call Sunjoy from 8:30 AM to 5:30

PM Eastern Time at the following: 1-866-578-0101 (English, French & Spanish in US) or e-mail: service@ferro-works.com.

20 December 2013 2

Parts List

PART

# DESCRIPTION QTY LINE DRAWING

OF PART

PART

# DESCRIPTION QTY LINE DRAWING

OF PART

A Connector Cover

(Small Roof) 1 I4 Bar 6 (Large Roof,

Large) 2

B Bar Cover 1 (Small

Roof) 4 J Bar 7 (Large Roof,

Slanting) 4

C1 Bar 1 (Small Roof) 2 K1 Bar 8 (Large Roof,

Middle, Long) 2

C2 Bar 2 (Small Roof) 2 K2 Bar 9 (Large Roof,

Middle, Short) 2

D Connector 1 (Small

Roof) 1 L1 Connector 2 (Bar) 2

E1 Roof Panel 1 (Small

Roof, Short) 2 L2 Connector 3 (Bar) 2

E2 Roof Panel 2 (Small

Roof, Long) 2 N Bar Cover 2 (Large

Roof) 4

F1 Roof Frame 1 (Large

Roof, Long) 2 N1 Bar Cover 3 (Large

Roof) 2

F2 Roof Frame 2 (Large

Roof, Short) 2 O1 Gutter 1 2

G1 Roof Panel 3 (Large

Roof, Long) 2 O2 Gutter 2 2

G2 Roof Panel 4 (Large

Roof, Long) 2 Q1 Post 1 2

G3 Roof Panel 5 (Large

Roof, Long) 2 Q2 Post 2 2

G4 Panel Cover 1 (Large

Roof, Long) 4 R Slate Top 2

H1 Roof Panel 6 (Large

Roof, Short) 2 S Fence 2

H2 Roof Panel 7 (Large

Roof, Short) 2 T1 Bracket ( Slate Top) 4

H3 Panel Cover 2 (Large

Roof, Short) 2 T2 Connector 4 (Slate

Top) 4

I1 Bar 3 (Large Roof,

Short) 2 U Hook 1

I2 Bar 4 (Large Roof,

Short) 2 V Corner Cover

(Inside) 4

I3 Bar 5 (Large Roof,

Large) 2

20 December 2013 3

Hardware Packet for Step 1

PART # DESCRIPTION QTY LINE DRAWING

BB M6 washer 8

JJ M8 x 20mm bolt 20

KK M8 washer 20

LL M6 x 45mm bolt 8

Z1 M6 wrench 2

Z2 M8 wrench 1

20 December 2013 4

Hardware Packet for Step 2

PART # DESCRIPTION QTY LINE DRAWING

AA M6 x 15mm bolt 40

BB M6 washer 80

CC M6 x 15mm bolt 16

DD M6 x 55mm bolt 12

FF M6 nut 12

JJ M8 x 20mm bolt 12

KK M8 washer 12

Fig.1: Attach Fence (S) to Post (Q1, Q2) with bolt (LL) and washer (BB). Make sure holes for slate shelf brackets face

outwards and are on top. Slate shelf can be installed at 3 different heights – 34”, 36” or 42”. Decide on your slate

shelf height before installing the fence. Use M6 plug to cover holes in posts that are not used.

Fig.2: Assemble Gutter (O2) and Post (Q1, Q2) with bolt (JJ) and washer (KK). Do not tighten them at this step.

Fig.3: Assemble Gutter 1 (O1) and Gutter 2 (O2) with bolt (JJ) and washer (KK).

20 December 2013 5

Fig.4:Attach Connector 2 (L1) and Connector 3 (L2) to the assembled gutters (L1/L2) with bolt (JJ) and washer (KK).

Fig.5: Assemble Roof Frame 1 (F1) and Roof Frame 2 (F2) together with bolt (AA) and washer (BB).

Fig.6:Attach Bar 7 (J) to Connector 2 / Connector 3 (L1/L2) with bolt (DD), washer (BB) and nut (FF).

Fig.7:Attach Bar 7 (J) to Roof Frame 1 (F1) with bolt (AA) and washer (BB).

Fig.8: Attach Bar 8 (K1) to Gutter (O1) with bolt (AA) and washer (BB) and then do the same step to Bar 9 (K2) and

Gutter (O2).

Fig.9: Attach Bar 8 (K1) to Roof Frame 1 (F1) with bolt (AA) and washer (BB), then do the same step to Bar 9 (K2)

and Roof Frame 2 (F2).

20 December 2013 6

Hardware Packet for Step 3

PART # DESCRIPTION QTY LINE DRAWING

AA M6 x 15mm bolt 32

BB M6 washer 112

CC M6 x 15mm bolt 60

MM M6 x 30mm bolt 20

II 8 x 180 stake 8

EE M6 plug 24

Fig.10: Attach Bar 1 / Bar 2 (C1 / C2) to Roof Frame 1 (F1) with bolt (AA) and washer (BB).

Fig.11: Attach Bar 1 / Bar 2 (C1 / C2) to Connector 1 (D) with bolt (DD), washer (BB) and nut (FF). Screw Hook (U) up

to Connector 1 (D) as the dash line indicated in Fig.9.

Fig.12、Fig.12-1: Attach Bar 6 (I4) to Bar 7 (J) and Bar 8 (K1) respectively with bolt (CC) and washer (BB). Do the same

step to Bar 3 (I1) , Bar 4 (I2) and Bar 5 (I3) .

20 December 2013 7

Fig.13: Place Roof Panel 1 (E1) on bar 1 (C1) and bar 2 (C2) and secure them with bolt (CC) and washer (BB). Do not tighten

roof panel screws until all panels have been installed and aligned.

Fig.14: Repeat the above step to Roof Panel 2 (E2).

Fig.15: Place Bar Cover 1 (B) on Bar 1 / Bar 2 (C1/C2) and secure them with bolt (MM) and washer (BB).

Fig.16: Place Connector Cover (A) on Connector1(D)andsecurethemwithbolt(CC)andwasher(BB).

Fig.17: Place Roof Panel 6 (H1) and Roof Panel 7 (H2) on the above assembled bars (J, K2, I1 and I2) and secure them together

with bolt (CC) and washer (BB).

Fig.18: Place Panel Cover 3 (H3) on the edge of the assembled Roof Panel 7 (H2) and secure them with bolt (CC) and washer

(BB).

20 December 2013 8

Fig.23: Attach 2 Bracket (T1) to each Fence (S) with bolt (AA) and washer (BB).

Fig.24: Place Slate Top (R) on Bracket (T1) and secure them with bolt (AA) and washer (BB).

Fig.25:Attach Connector 4 (T2) to Slate Top (R) with bolt (AA) and washer (BB).

Fig.19: Place Roof Panel 3, 4, 5 (G1, G2, G3) on the above assembled bars (J, K1, I3 and I4) and secure them together

with bolt (CC and washer (BB)

Fig.20: Place Panel Cover 4 (G4) on the edge of the assembled roof panel 4, 5 (G2, G3) and secure them with bolt (CC)

and washer

(

)

Fig.21: Place Bar Cover 2 (N) on the assembled roof panels (H1, H2, G1, G2 and G3) and secure them with bolt (MM) and

washer (BB).

Fig.22: Place Bar Cover 3 (N1) the assembled roof panels (G1, G2, G3) and secure them with bolt (MM) and washer (BB).

20 December 2013 9

Fig.28: The slate tops are designed to be adjustable to 34”, 36” and 42” height. When the slate tops are assembled at 34”

height (Fig.28) and 36” height (Fig. 28-1), the extra holes on the posts above the slate tops can be hidden by plug (EE).

Same for the holes on the posts under the slate tops when the slate tops are at 42” height (Fig 28-2).

CARE INSTRUCTIONS

Clean gently with a sponge using environmentally-friendly soap solution and water. Do not use abrasive materials, wire

brushes, chemicals, cleansers or bleach. Do not use a pressure washer. Rinse well. Allow to air dry.

If there are nicks, chips or scratches, go to your local hardware store or home center and obtain a closest match touch-up paint

suitable for outdoor metal use. Follow instructions that appear on the paint can.

SPECIFICATIONS:

Resists winds up to 39 mph when firmly anchored using stakes to the ground.

Resists winds up to 47 mph when firmly anchored using expansion bolts into a suitable concrete base.

Roof can withstand up to 176.37 lbs / 80 kg weight load.

Maximum load for the center hook: 88 lbs / 39.9 kg.

MADE IN CHINA

Fig.26: Attach Corner Cover (V) to the assembled gutters (O1, O2) with bolts (AA, CC) and washer (BB). Adjust the

Corner Cover by holding the cover in place to align with the gutters and tightening the bolts.

Fig.27: Secure all posts (Q1, Q2) to the ground with stake (II).

Inhaltsverzeichnis

Andere Sunjoy Gartenmöbel Handbücher

Sunjoy

Sunjoy L-GG001PST-F Bedienungsanleitung

Sunjoy

Sunjoy A109000100 Bedienungsanleitung

Sunjoy

Sunjoy A215002900 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ240PST-C Bedienungsanleitung

Sunjoy

Sunjoy A101012202 Bedienungsanleitung

Sunjoy

Sunjoy Rona 38115107 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ717PST-C-CL Bedienungsanleitung

Sunjoy

Sunjoy AUTOCOVE A110000400 Bedienungsanleitung

Sunjoy

Sunjoy Dunkirk L-GZ326PST-2B Bedienungsanleitung

Sunjoy

Sunjoy D-GZ238PST-11K Bedienungsanleitung

Sunjoy

Sunjoy 10'X10' OPP Gazebo L-GZ322PST Bedienungsanleitung

Sunjoy

Sunjoy A102007300 Bedienungsanleitung

Sunjoy

Sunjoy A102001703 Bedienungsanleitung

Sunjoy

Sunjoy A102007603 Bedienungsanleitung

Sunjoy

Sunjoy A102008700 Bedienungsanleitung

Sunjoy

Sunjoy A106005600 Bedienungsanleitung

Sunjoy

Sunjoy A106008100 Bedienungsanleitung

Sunjoy

Sunjoy A108000100 Bedienungsanleitung

Sunjoy

Sunjoy A101012300 Beilage

Sunjoy

Sunjoy L-GZ043PST-3 Bedienungsanleitung

Sunjoy

Sunjoy A111005500 Bedienungsanleitung

Sunjoy

Sunjoy A102007260 Bedienungsanleitung

Sunjoy

Sunjoy L-DN522SAL-CT Bedienungsanleitung

Sunjoy

Sunjoy L-GG067PST Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

OLT

OLT 24 Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung