Sunjoy L-GZ605PST-A1 Bedienungsanleitung

Assembly Instructions

Item: L-GZ605PST-A1

DO NOT REMOVE THE PROTECTIVE FILM ON THE PC TOP PANELS UNTIL

INSTALLATION. MAKE SURE TO PUT THE UV PROTECTED SIDE FACING UP. IT IS A

VERY IMPORTANT PROCEDURE; IF NOT FOLLOWED AS DESCRIBED, YOUR ROOF

WILL NOT BE COVERED BY THE GUARANTY.

GAZEBO ASSEMBLY INSTRUCTIONS

Our clear, easy-to-follow, step-by-step instructions will guide you through the

project from start to finish. The final product will be a quality piece that will give

you years of enjoyment.

All you will need is a screwdriver, a hammer and two ladders of at least 8 feet

(2.5 m) high (not included).

Note: THIS UNIT IS HEAVY!

DO NOT assemble this item alone for your safety. Six people are necessary for

smooth & safe installation.

Item identification: For ease of identification, all parts are labeled to correspond

to the Step number in which the part is used.

Front post 1 A1 1

Front post 2 A2 1

Back post 1 A3 1

Back post 2 A4 1

Side beam 1 B1 1

Side beam 2 B2 1

Decorative slot 1 C1 1

Decorative slot 2 C2 1

Junction bar D 1

Back beam 1 E1 1

Back beam 2 E2 1

Beam junction F 2

Middle beam 1 G1 1

Middle beam 2 G2 1

Small beam 1 H1 2

Small beam 2 H2 2

Small beam

junction I 2

Back card slot 1 J1 1

Back card slot 2 J2 1

Front card slot 1 K1 2

Parts List

Front card slot 2 K2 1

Edge beam 1 L1 1

Edge beam 2 L2 1

Middle beam L3 4

PC panel 1 M1 10

PC panel 2 M2 1

PC panel 3 M3 1

PC panel 4 M4 1

PC panel 5 M5 1

PC penal card slot N 5

Side card slot 1 N1 1

Side card slot 2 N2 1

Post base 1 O1 2

Post base 2 O2 2

Post base cover 1 P1 2

Post base cover 2 P2 2

Curtain-mounting tab Q 4

Middle beam bracket R 2

Connecting piece 1 S1 12

Connecting piece 2 S2 4

Connecting piece 3 S3 1

Connecting piece 4 S4 1

Bracket 1 T1 1

Bracket 2 T2 1

Bracket 3 T3 4

Corner support U 2

Mosquito screen V 1

Curtain W 1

AA Bolt M6X20 4PCS

BB Flat washer M6 74PCS

CC Bolt M6X15 38PCS

DD Nut M6 2PCS

FF Bolt M6X15 24PCS

GG Bolt M6X35 4PCS

HH Bolt M6X15 26PCS

Z1 Wrench M6 2PC

Z2 Wrench M6 1PC

Hardware Pack 1

Fig.1: Install the curtain-mounting tab (Q) to back post 1 (A3) and back post 2 (A4) with bolt (AA) and

flat washer (BB). Ensure the narrow surface of the curtain-mounting tab (Q) faces the post with three

holes.

Fig.2: Set the post base cover 1 (P1) into the back post 1（A3）and back post 2 (A4), then secure post

base 1 (O1) to post 4 (A4) and post 3 (A3) with a bolt (HH) and flat washer (BB). Ensure the flat

surface of the base 1 (O1) and post base cover 1 (P1) face the post with three holes.

Fig.3: Set the post base cover 2 (P2) to the front post 1 (A1) and front post 2(A2), then secure the post

2 (O2) to front post1 (A1) and front post 2(A2) by using bolt (HH) and flat washer (BB).

Fig.4: Install the plastic rings (EE) into decorative slot 1 (C1) and decorative slot 2 (C2), use 7 plastic

rings for each decorative slot.

Fig.4-1: Insert the junction bar (D) into the decorative slot 1(C1) and decorative slot 2 (C2), and secure

with bolt (CC) and flat washer (BB).

Fig.5: Install the plastic rings (EE) into the runner of side beam 1 (B1) and side beam 2 (B2), 12 plastic

rings for each runner.

Fig.6: Insert the beam junction (F) into back beam 1 (E1) and beam 2 (E2) and secure with bolt (CC),

and flat washer (BB).Install the middle beam 1 (G1) and middle beam 2 (G2) in the same way with

back seam1 (E1) and back seam2 (E2).

Fig.7: Use bolts (FF) to install the complete side beam 1(B1) (or side beam 2(B2)) to front post 1 (A1)

and back post2 (A4)(or front post 2(A2) and back post 1(A3))

Fig.8: Install the complete decorative slot to front post with bolt (GG) and flat washer.

Fig.9: Install the corner support (U) to the corner of front post, and secure them with bolt (HH) and bolt

(BB).

Fig.10: Install the complete back beam to back post with bolt (FF).

Fig.11: Use bolt (HH), flat washer (BB) to install the connecting piece 3 (S3) (or install connecting

piece 4(S4)) to edge beam 1(L1)(or edge beam 2(L2)), then install the complete side beam to post 1

(A1)(or post 2(A2))

Fig.12: Using connecting piece 2(S2), bolt (CC), flat washer (BB) to secure the edge beam 1(L1)(or

edge beam 2(L2)) to back seam. Use bolt (CC) and flat washer (BB) to install middle beam mounting

bracket (R) and middle beam to side beam. Install connecting piece 2 (S2) to the bolt of edge beam

1(L1)(or edge beam 2(L2))’s card slot by using bolt (DD) and flat washer (BB), then use a bolt (CC)

and flat washer (BB) to install connecting piece (2) to middle beam.

BB Flat washer M6 56PCS

CC Bolt M6X15 40PCS

DD Nut M6 4PCS

II Nut M6 12PCS

Hardware Pack 2

Fig.13, Fig.13-1: Insert the PC panel 3 (M3)(or PC panel 5 (M5)) to the card slot of edge beam and side

beam, then insert PC panel 2 (M2)(or PC panel 4(M4)) to the card slot of edge seam and side beam.

Fig.14: Using connecting piece 1 (S1), bolt (CC) and flat washer (BB) to install one side of middle beam

(L3) to back beam.

Fig.14-1: Install the connecting piece 1(S1) to the bolt of middle beam (L3)’s card slot by using bolt CC and

flat washer BB. Use bolt (CC) and flat washer (BB) to install the connecting piece 2 (S2) to middle beam.

Fig.14-3: Install another side of middle beam (L3) to decorative slot by using connecting piece 1(S1),

bolt (CC) and flat washer (BB).

Fig.15: Insert the small beam junction (I) into small beam 1(H1) and small beam 2(H2) and secure

them with bolt CC and flat washer BB.

Fig.15-

1: Set the complete small beam through the 2 group bolts middle beam (L3) and edge

beam(L1) and secure them with nut (II) and flat washer (BB).

CC Bolt M6X15 6PCS

BB Flat washer M6 16PCS

HH Bolt M6X15 4PCS

DD Nut M6 6PCS

JJ Bolt M6X10 6PCS

Hardware Pack 3

Fig.16: Settle back card slot 1 (J1) and back card slot 2 (J2) to edge beam and middle beam, and secure one side of

back card slot to edge beam by using bolt (HH) and flat washer (BB).

Fig.16-1: Use bolt (CC) and flat washer (BB) to secure the back card slot 1(J1) and back card slot 2(J2) to the middle

beam (L3)

Fig.17: Set the side card slot 1 (N1) and side card slot 2 (N2) to side PC panel, and secure them with bolt HH and flat

washer BB.

Fig.18: Insert the PC panel 1(M1) into the slot of middle beam (L3), install the edge beam 1(L1) and edge beam 2(L2)

Fig.18-1: Insert the PC panel (N) into the slot of middle beam (L3), install the edge beam1 (L1) and edge beam2 (L2) the

same way.

Fig.18-2: Insert PC panel 1(M1) into the bottom card slot of middle beam (L3), install edge beam 1(L1) and edge beam

2(L2) the same way.

Fig.19: Insert the bolt (JJ) into the bottom card slot of middle beam (L3), edge beam 1 (L1) and edge beam 2 (L2), then set

the front card slot 1 (K1) to complete bolt (JJ) and insert the front card slot into the PC panel. Install front card slot 2(K2)

the same way, see step 3.

Fig.20: Install the blank 2(T2) to edge beam 2(L2) and front card slot 2(K2), and secure them with bolt DD and flat

washer BB. Same way to install the blank 1(T1) and blank 3(T3), see step 3.

KK Nail Φ8X250MM 14 PCS

Screw M6*80

8PCS

Hardware Pack 4

EE Plastic ring 76PCS

Hardware Pack 5

Inhaltsverzeichnis

Andere Sunjoy Gartenmöbel Handbücher

Sunjoy

Sunjoy L-GZ050PST-2 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ937PST-C Bedienungsanleitung

Sunjoy

Sunjoy A102008000 Bedienungsanleitung

Sunjoy

Sunjoy L-GG004PST-D Bedienungsanleitung

Sunjoy

Sunjoy PINEHURST L-GZ1188PST Bedienungsanleitung

Sunjoy

Sunjoy Catalina L-GZ660PST-D-MN Bedienungsanleitung

Sunjoy

Sunjoy Sienna Gazebo L-GZ240PST-A Bedienungsanleitung

Sunjoy

Sunjoy A102003701 Bedienungsanleitung

Sunjoy

Sunjoy A101011700 Bedienungsanleitung

Sunjoy

Sunjoy 169216 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ1095PST-A Bedienungsanleitung

Sunjoy

Sunjoy D-GG072PST Bedienungsanleitung

Sunjoy

Sunjoy S-GZ1182PST Bedienungsanleitung

Sunjoy

Sunjoy L-GG001PST-H Bedienungsanleitung

Sunjoy

Sunjoy Monterey L-GZ215PST-4-PK Bedienungsanleitung

Sunjoy

Sunjoy A102008122 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ071PST-3 Bedienungsanleitung

Sunjoy

Sunjoy SummerCove A102014000 Bedienungsanleitung

Sunjoy

Sunjoy A101012500 Bedienungsanleitung

Sunjoy

Sunjoy D-GZ846PCO-J Bedienungsanleitung

Sunjoy

Sunjoy L-DN1196SAL-RC Bedienungsanleitung

Sunjoy

Sunjoy A101012300 Bedienungsanleitung

Sunjoy

Sunjoy D-GZ840PST-C Bedienungsanleitung

Sunjoy

Sunjoy 10’x12’ Benen Gazebo L-GZ215PST-1 Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

OLT

OLT 24 Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung