LIT 234
Sunoptic Technologies
®
Rev. -
(English) Date of Revision:02/01/18
Page 5 of 6
and battery contacts, and place the battery into the slot. Do not force the battery into
the slot. Refer to the charger IFU for a detailed operation.
ABOUT SMBus and SBS: The Smart Battery System defines the parameters that are
stored by an SBS-compliant battery. These parameters include full battery status and
fuel gauging information. The System Management Bus is the language by which these
parameters are communicated between the battery, the charger and the host device.
NOTE: The SSL-2054BE no longer requires fuel gauge re-calibration.
5. CLEANING INSTRUCTIONS
•Remove the battery from the host device.
•Clean the exterior of the battery with a cloth that has been dampened (not dripping)
using a hospital disinfectant. Follow applicable hospital protocols during cleaning
and dry immediately.
6. USER SERVICE
The SSL-2054BE has no user or field serviceable components. It can only be serviced
at the factory by factory trained technicians.
7. REPLACEMENT PARTS
For replacement parts, additional or optional equipment :
Please call Customer Service @ 877-677-2832
8. LIMITED WARRANTY
Your battery carry a one year warranty from the date of shipment on workmanship and
all defects of material. Should your product prove to have such defects Sunoptic
Technologies
®
will repair or replace the product or component part without charge.
Please contact Sunoptic Technologies
®
for return authorization documentation.
You should carefully pack the unit in a sturdy carton and ship it to the factory. Please
include a note describing the defects, your name, telephone number and a return
address. Warranty does not cover equipment subject to misuse, accidental damage,
normal wear and tear or if transferred to a new owner without authorization from
Sunoptic Technologies
®
. This warranty gives you specific legal rights and you may
also have other rights that vary from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping
prepaid to the factory. Your product will be inspected and an estimate of repair
charges will be submitted to you for approval. Payment must be received before
repairs are completed.
•In the U.S call: 877 667-2832 (toll free)
•Customer Service 904 737-7611
