SunStar KM-2070P Bedienungsanleitung
USER S MANUAL
KM-2070P SERIES
R
Electronically Controlled
1-Needle ZigZag Lock
Stitch Machine
Electronic Control Part
Best Quality
Best Price
Best Service
SunStar CO., LTD.
R
1.
Thank you for purchasing our product. Based on the rich expertise and
experience accumulated in industrial sewing machine production, SUNSTAR
will manufacture industrial sewing machines, which deliver more diverse
functions, high performance, powerful operation, enhanced durability, and
more sophisticated design to meet a number of user’s needs.
2. Please read this user’s manual thoroughly before using the machine. Make
sure to properly use the machine to enjoy its full performance.
3. The specifications of the machine are subject to change, aimed to enhance
product performance, without prior notice.
4.
This product is designed, manufactured, and sold as an industrial sewing
machine. It should not be used for other than industrial purpose.
Contents
1. Internal Structure of Control Box 4
2. Connection of Power Voltage and Control Box Cable 5
1) Power Voltage and Power Code Connection 5
2) Cable Connection to Control Box 6
1) Initialization of Machine 33
2) Intertia Tuning 33
3) Hook Test Function 33
4) Machine Test Function 34
5) Parameter Changing Method and Classification 37
6) Exchanging the Fuse 40
4. Error Indications and Action Plan 32
1) Operation Panel and key Functions 7
2) Pattern Setting Method 8
3) Sewing Method of Left/Right Scallop 10
4) Sewing Method of Left/Right Blind 11
5) Sewing Method of Left/Right L-Stitch 12
6) ZigZag Width (Max. zigzag-width: 10mm) 13
7) Sewing Speed 14
8) Using Method of Start Condence 15
9) Using Method of End Condense 17
10) Setting of Base-Line 19
11) Left/Right Stop Location of Needle 21
12) Up/Down Stop of Needle 23
13) Basic Concept for Operation of Operation Panel 23
14) Reverse (mirror) Function 24
15) Name Stitch 26
16) Deciding Presser Foot Up/Down Location 28
17) Thread Trimming and Wiper Function 28
18) Auto Function 28
19) Half Stitch Operation 28
20) Using Reverse Feed Control Lever and Using Reverse Button(A Button) 29
21) Rom Pattern (Use Pattern) Input Method 30
22) Formatting 30
23) Method of Setting the Starting Point 31
3. Using Operation Panel and Sewing 7
6. Block Wiring Diagram 41
5. Others 33
11
Internal Structure of Control Box
Step Motor Driving Board
[2070P CONTROL BOX]
Digital Board
Cooling Fan
Transformer
Servo Motor Driving Board
Power Board
4
1) Power Voltage and Power Code Connection
(1) Voltage Specification
Match the indication of voltage to specification of power code and connect the cable.
1. Must not use on condition that voltage specification is different.
2. In case of change the using voltage, refer to the article. [Power Voltage Changing Method]
Single-phase connection( 100V, 110V, 120V, 200V, 220V, 240V)
Three-phase connection (200V, 220V, 240V, 380V, 440V)
(2) Power Voltage Changing Method
In Voltage of 110V series, 220V series and 380~440V specification, you can change into the voltage as follows by just
changing the location of power voltage switching connector
■Voltage change of 100~220V specification
Trans former Model: KM-2070P-110 ■Voltage change of 220V specification
Trans former Model: KM-2070P-220
Input Voltage
95V~105V
106V~115V
116V~125V
JP3
JP4
JP5
Location of Power Voltage
Switching Connector
Input Voltage
190V~210V
211V~230V
231V~250V
JP1
JP2
JP3
Location of Power Voltage
Switching Connector
■Voltage change of 380~440V specification
Trans former Model: KM-2070P-440
Input Voltage
345V~415V
416V~480V
JP4
JP5
Location of Power Voltage
Switching Connector
If power voltage switching connector is wrongfully set, control box can be damaged. In case that changes
voltages between the phases 110V and 220V series and 380V~440V series transformer should replace.
Please refer to Item 5 to 6 concerning fuse capacity in the power board and usage
Danger
[ Power Voltage Switching Connector Setting ] [ Fig. 1 ]
In case that input
power is over 220V In case that input
power is 110V
series
Power Voltage
Switching Connector
Step Motor Driving Board
Zigzag Sewing Machine Control Box
Cooling Fan
Digital Board
Power Board Transformer
Servo Motor Driving
Board
200V 220V 240V 380V 440V
100V 110V 120V
▼JP1 ▼JP2
P4
▼JP3 ▼JP4 ▼JP5
5
22
Connection of Power Voltage and Control Box Cable
R
2) Cable Connection to Control Box
A. Internal Wiring of Control Box (Common in all types)
See“Block Wiring Diagram”
Upper Figure is wiring diagram based on KM-2070P-7 model and the wiring in case that selected Knee-lifter
switch (including presser foot solenoid) for option
As KM-2070P model are none-thread trimming type, it does not need to connect cable for thread trimming ,
wiper, tension release solenoid.
Switch cable consists of two; white and blue connector(Knee-lifter switch is option)
White connector : Connect reverse button
Blue connector : Connect Knee-lifter switch (connect presser foot solenoid cable as well)
In case of power cable connection, pay attention to fix to table that interference does not occur with belt.
Note
B. External Wiring of Control Box
Cooling Fan
Control Box
Digital
Board
14. Step Motor Driving Signal Cable
15. Servo Motor Driving Signal Cable
16. Servo Motor Auxiliay Signal Cable
21. Cooling Fan Cable
18. Servo Motor Power Cable
29. Dial OP Connect Cable
6. Encoder Cable (Green)
5. Synchro Cable (Black)
3. Pedal Cable (Yellow)
4. Sensor Cable
26. Main Motor Cable
24. Reverse Switch Cable
25. Auto Presser Foot Lifter Switch Cable
※B/T Step Motor Origin Sensor Cable
1. Operation Panel Cable
11. Back Tack Solenoid Cable (White) J4
9. Wiper Solenoid Cable (Blue) J7
8. Thread Cutting Solenoid Cable (Red) J6
7. Presser Foot Solenoid Cable (Yellow) J5
10. Tension Release Solenoid Cable (Green) J8
27. Step Motor Cable
17. Power Switch Cable
28. B/T Step Motor
Trans
Trans
Power Board
Power Board
J1 J1
J16
J17
J3
Digital Board
J5
J6
J6
J3
J7
J5
J2
J4
J15
J4
J2 J14 J13 J18
J10
J9
Step Motor Driving Board
Servo Motor
Driving Board
Servo Motor
Driving Board
Step Motor
Driving Board
6
20. Solenoid Power Cable
J5 J6 J7
J8
33
Using Operation Panel and Sewing
1) Operation Panel and Key Function
①Straight Line Pattern Key
②2 point pattern key
③3 point pattern key
④4 point pattern key
⑤Left -scallop pattern key
⑥Right-scallop pattern key
⑦Left-blind pattern key
①
⑩⑫⑭⑮⑬⑪⒃⒔ ⒕
②③ ④⑤⑥⑦ ⑧⑨
⒗
⒖
⑧Right-blind pattern key
⑨ROM pattern (user pattern) key
⑩ZigZag-width key
⑪Start Condense key
⑫Base line key
⑬End condense key
⑭Needle Left/Right Stop key
⑮Name stitch key
⒃Needle Up/Down stop key
⒔Presser foot up/down key
⒕Thread trimming/wiper key
⒖Auto key
⒗Speed key
N1 key
N2 key
+ key
- key
Half-Stitch Key
PARA/SET key
Indication device
Indication lamp
7
R
2) Pattern Setting Method
■Operation Panel Indication Status
■Operation Order
1. Turn on the power.
2. Pressing the key of the desired pattern, the lamp of selected
pattern is on.
·Example: selection of pattern number 3 (3 point zigzag
pattern)
·See 3) for selection of left, right scallop pattern
·See 4) for left and right blind pattern
3. Then, start sewing by stepping on the pedal.
4. Execute thread trimming by stepping back the pedal after
completion of sewing.
(Thread trimming and wiper are options)
Indication Device (Unit: 0.1mm)
Indication lamp of 2 point pattern
Indication lamp of needle down stop
Presser Foot Indication Lamp
Thread Trimming Indication Lamp
Wiper Indication Lamp
<Initial Setting Status of Operation Panel>
ZigZag-Width Indication (8mm)
Turned On
Turned On
Turned On
Turned On
Turned On
Power On
Indicate initial setting status
on the operation panel.
Sewing
Set the desiring pattern
(example: pattern no. 3)
Indication lamp is on.
[Note]
When the power turned on, if buzzer tone rings and U P is displayed on indication device, it means needle bar is not
on the up stop location. Therefore, turn the pulley to the front by hand that the needle bar can be at up stop location. Then,
indication device discappers U P and shows zigzag-width and you can start sewing.
8
■Basic Pattern Number and Shape
Pattern No.
1
2
3
4
7
8
9
5
6
Pattern Name
Straight Line Pattern
2 point (standard) zigzag pattern
3 point (2 step) zigzag pattern
4 point (3 step) zigzag pattern
Left
Right
[Straight Line] [2 point ZigZag]
[3 point
ZigZag]
[4 point
ZigZag]
1(24 Stitches)
2(12 Stitches)
3(24 Stitches)
4(24 Stitches)
1(24 Stitches)
2(12 Stitches)
3(24 Stitches)
4(24 Stitches)
Blind
L-Stitch
Blind
L-Stitch
ROM Pattern (user input pattern)
Left Scallop
pattern
Right Scull
Lap Pattern
Status of Indication Device
[1] [2] [3] [4]
[1] [2] [3] [4]
Normal L-Stitch Normal L-Stitch
[Left-scallop 1~4]
[Right-scallop1~4]
[Left Blind] [Right Blind]
1 -
2 -
3 -
4 -
5-1
5-2
5-3
5-4
6-1
6-2
6-3
6-4
7 -
8 -
9 -
[The Shape of 16 Basic Patterns]
9
R
3) Sewing Method of Left/Right Scallop
■Operation Panel Indication Status
Ex) Selection shape No. 3 of Left scallop Pattern
■Operation Order
1. Press left scallop key.
·Indication lamp of left scallop turns on. At the same time,
pattern number and shape number are displayed on the
indication device and after a moment, zigzag-width is
displayed.
2. Press PARA/SET key in order to change the shape number.
·ZigZag-width on indication device blinks and at the time,
pressing left scallop key, pattern number and shape
number are displayed on the indication device.
3. Change the shape number by using + and –key.
(Ex: selection of pattern shape no. 3)
4. Press PARA/SET key when the change is completed.
·ZigZag-width is displayed on the indication device.
5. You may start sewing by stepping on the pedal.
[Note]
·In case of right scallop, it is the same as the operation
method above.
Power On Start
Sewing
or
Indication Device
Pattern Number
Shape Number
10
Andere Handbücher für KM-2070P
1
Inhaltsverzeichnis
Andere SunStar Nähmaschine Handbücher
SunStar
SunStar SPS/D-B1201 SERIES Bedienungsanleitung
SunStar
SunStar NNS Series Bedienungsanleitung
SunStar
SunStar SPS/A-3020 5030 SERIES Bedienungsanleitung
SunStar
SunStar SPS/F-2211 Series Bedienungsanleitung
SunStar
SunStar SPS/C-5050 Series Bedienungsanleitung
SunStar
SunStar DPK-5 Bedienungsanleitung
SunStar
SunStar KM-2510A Produkthandbuch
SunStar
SunStar KM-1060BL Bedienungsanleitung
SunStar
SunStar KM-857 Series Bedienungsanleitung
SunStar
SunStar KM-757 Bedienungsanleitung
SunStar
SunStar SPS/B-1811 SERIES Bedienungsanleitung
SunStar
SunStar SPS/E-1306 Series Bedienungsanleitung
SunStar
SunStar KM-380BL Bedienungsanleitung
SunStar
SunStar SPS/E-BS1201H Bedienungsanleitung
SunStar
SunStar SJS/A-BA2 Bedienungsanleitung
SunStar
SunStar SPS/E-BS1201 Series Bedienungsanleitung
SunStar
SunStar KM-76 Bedienungsanleitung
SunStar
SunStar KM-957 Series Bedienungsanleitung
SunStar
SunStar SPS/B-2516 Series Bedienungsanleitung
SunStar
SunStar SWF Bedienungsanleitung
