SunStar SPS/B-1306 SERIES Bedienungsanleitung

EElleeccttrroonniiccaallllyy CCoonnttrroolllleedd

PPaatttteerrnn SSeewwiinngg MMaacchhiinnee

((MMeecchhaanniiccaall PPaarrtt))

USER’’

MANUAL

SPS/B-1306 SERIES

SPS/A-1306 SERIES

SPS/B-1507 SERIES

SPS/A-1507 SERIES

SPS/B-1310 SERIES

SPS/A-1310 SERIES

1) FOR AT MOST USE WITH EASINESS,

PLEASE CERTAINLY READ THIS MANUAL

BEFORE STARTING USE.

2) KEEP THIS MANUAL IN SAFE PLACE

FOR REFERENCE WHEN THE MACHINE

BREAKS DOWN.

MME-041129

SSUUNNSSTTAARR MMAACCHHIINNEERRYY CCOO..,, LLTTDD..

Best Quality

Best Price

Best Service

SSUUNNSSTTAARR MMAACCHHIINNEERRYY CCOO..,, LLTTDD..

Thank you for purchasing our product. Based on the rich expertise and

experience accumulated in industrial sewing machine production, SUNSTAR

will manufacture industrial sewing machines, which deliver more diverse

functions, high performance, powerful operation, enhanced durability, and

more sophisticated design to meet a number of user’s needs.

2. Please read this user’s manual thoroughly before using the machine. Make

sure to properly use the machine to enjoy its full performance.

3. The specifications of the machine are subject to change, aimed to enhance

product performance, without prior notice.

This product is designed, manufactured, and sold as an industrial sewing

machine. It should not be used for other than industrial purpose.

Organization of the Pattern S/M Model

Series

A: Motor belt-type

B: Motor direct drive-type

SunStar

Pattern

System

Sewing Area

SPS/B-13 06-H S-10

X : 130mm

Y : 60mm

Feeding Frame

Type

Stitch Type

Material Type

󳣑Pattern Model

A : Belt Type

H : Drive Type

󳣑Sewing Area

1306 : X(130mm), Y(60mm)

1507 : X(150mm), Y(70mm)

1310 : X(130mm), Y(100mm)

1811 : X(180mm), Y(110mm)

2516 : X(250mm), Y(160mm)

5030 : X(500mm), Y(300mm)

󳣑ApplicationSewing Area

G:General Material

H:Heavy Material

󳣑Stitch Type

S:Standard Stitch

P:Perfect Stich

󳣑Feeding Frame Type

10 : Magnet-Driven Feeding Frame

20 : Pneumatic Monolithic Feeding Frame

21 : Pneumatic Monolithic Feeding Frame with Two Step

Stroke Device

22 : Pneumatic Separately-Driven Feeding Frame

(22-1 : Pneumatic Separately-Driven Feeding Frame wiht

Two Step Stroke Device

23 : Pneumatic Separately-Driven Feeding Frame with

Inverting Clamp Device

CONTENT

1. Machine Safety Regulations 6

1) Machine Transportation 6

2) Machine Installation 6

3) Machine Repair 6

4) Machine Operation 7

5) Devices for Safety 7

6) Caution Mark Position 8

7) Contents of Marks 8

2. Specifications of the Machine 9

3. Structure of the Machine 10

1) Names of each parts of the machine 10

2) Inside structure of control box 11

4. Installation of the Machine 13

1) Environment for machine installation 13

2) Electric installment conditions 13

3) How to install the table safety 13

4) The assembly of peripheral parts 17

5. Preparations Before Operating The Machine 20

1) How to supply oil 20

2) How to install the needle bar 21

3) How to thread the upper thread 22

4) Threading the lower thread 22

5) How to take the bobbin case on and off 23

6) How to adjust the tension of the upper thread and the lower thread 23

7) How to wind the lower thread 24

8) Adjusting the height of the presser foot 24

9) Disposing the waste oil 24

10) Model of transformer by voltage and setup of voltage 25

11) Caution when using the floppy disks 26

6. How to Repair the Machine 27

1) Adjusting the height of the needle bar 27

2) Adjusting the needle and the shuttle 27

3) Adjusting the lower shaft gear and the rocking shaft gear 28

4) Adjusting the spring on the upper side of the shuttle 28

5) Adjusting the height of the feed plate 29

6) Adjusting the presser foot devices 29

7) Adjusting the parts for the presser plate 31

8) Adjusting the parts for thread release 31

9) Adjusting the parts for the wiper 33

10) Adjusting the X-Y parts 34

11) Adjusting the trimming parts 35

12) Adjusting the main thread control device 38

13) Adjusting the upper thread detecting device 38

14) Adjusting the hand pulley device 38

15) Adjusting the winding device 39

16) How to Set the Position of Syncro (A Series) 39

17) Mounting the direct motor and adjusting method (B Series) 40

18) How to set the original point of X-Y 41

19) Exchanging the Fuse 42

7. Causes of Break-Down and Throubleshooting 43

8. SPS/B(A)-1306(1507)-GS-10 45

1) Machine specifications 45

2) How to thread the upper thread 45

9. SPS/B(A)-1306(1507)-HP(GP)-󳣑󳣑󳣑󳣑46

1) Machine specifications 46

2) How to attach the needle 47

3) How to hook the upper thread 47

4) How to hook the lower thread 47

5) Adjusting the spring on the upper side of the shuttle 48

6) Adjusting the moving knife and the fixed knife 48

10.

SPS/B(A)-1306(1507)-HS(GS)-20(21, 22-1, 22, 23) and SPS/B(A)-1310-HS(GS)-20(22)

1) Machine specifications 49

2) How to attach the parts for air pressure control 50

3) How to adjust the air pressure 50

4) Attaching the pressure plate sheet and adjusting the height of the slider base 50

5) How to adjust the up and down movement of the upper feed plate 51

6) How to use the manual pedal switch 52

7) Air system ciruit diagrams 54

8) Setting and Adjustment of SPS/B(A)-1310 58

11. Drawing of Table 60

MACHINE SAFETY REGULATIONS

Safety instruction on this manual are defined as Danger, Warning and Notice.

If you do not keep the instructoins, physical injury on the human body and machine damage might be occurred.

: This indication should be observed definitely. If not, danger could be happen during the installation,

conveyance and maintenance of machines.

: When you keep this indication, injury from the machine can be prevented.

: When you keep this indication, error on the machine can be prevented.

Danger

Warning

Notice

Those in charge of transporting the machine should know the safety regulations very

well. The following indications should be followed when the machine is being

transported.

ⓐMore than 2 people must transport the machine.

ⓑTo prevent accidents from occurring during transportation, wipe off the oil on the

machine well.

1-1) Machine

Transportation

Danger

The machine may not work well or breakdown if installed in certain places, Install the

machine where the following qualifications agree.

ⓐRemove the package and wrappings starting from the top. Take special notice on

the nails on the wooden boxes.

ⓑDust and moisture stains and rusts the machine. Install an airconditioner and clean

the machine regularly.

ⓒKeep the machine out of the sun.

ⓓLeave sufficient space of more than 50cm behind, and on the right and left side of

the machine for repairing.

ⓔDo not operate in explosive atmospheres. To avoid explosion, do not operate this

machine in an explosive atmosphere including a place where quantities of erosol

spray product are being used or where oxygen is being administered unless it has

been specifically certified for such operation.

ⓕThe machines were not provided with a local lighting due to the feature of machine.

Therefore the illumination of the working area must be fulfilled by end user.

[ Reference ] Details for machine installation are described in 4. Machine Installation.

1-2) Machine

Installation

Notice

When the machine needs to be repaired, only the assigned troubleshooting engineer

educated at the company should take charge.

ⓐBefore cleaning or repairing the machine, Turn off the main power and wait

4 minutes till the machine is completely out of power.

ⓑNot any of the machine specifications or parts should be changed without consulting

the company. Such changes may make the operation dangerous.

ⓒSpare parts producted by the company should only be used for replacements.

ⓓPut all the safety covers back on after the machine has been repaired.

1-3)Machine Repair

Danger

SPS/B(A)-1306(1507, 1310) Series are made for industrial use to perform pattern

sewing for fabrics or its similar materials. Please observe the following principles.

ⓐRead the manual to understand on the operation of machine perfectly.

ⓑWear suitable clothes and cap for safe operation.

ⓒDuring operation, don’t make you body close to operating part of machine such as

needle, hook, take-up lever or pulley.

ⓓDo not remove a safety plate and covers during operation

ⓔBe sure the grounding lines in connected.

ⓕBefore opening electricity box such as control box, cut off the supply of electricity

and confirm if the switch is“off”.

ⓖWhen inserting thread into a needle or before inspecting after sewing, be sure the

machine is stopped.

ⓗDo not turn on the power during pedaling.

ⓘDo not use several motor per a electric outlet.

ⓙInstall the machine apart from noise occurrence area such as high frequency

welding machines as far as possible.

ⓚBe careful-When the upper feed plate comes down to press. Otherwise, the finger or

hand hight be hurt at smacking.

1-4)Machine

Operation

Warning

Notice

[ Warning ]

Belt will crush or amputate finger or hand, keep cover in place before operating, turn off

power before inspecting or adjusting.

ⓐSafety label : It describes cautions during operating the machine.

ⓑThread take-up lever : It prevents from any contact between body and take-up lever.

ⓒServo motor cover : It prevents from insertion of hands, feet or clothes by motor and

Y-drive shaft.

ⓓStep motor cover : It prevents from accidents during rotation of step motors.

ⓔLabel for specification of power : It describes cautions for safety to protect against

electric shock during rotating the motors.

ⓕSafety plate : It protects eyes against needle breaks.

ⓖFinger guard : It prevent from contacts between a finger and needle.

1-5)Devices for

Safety

ⓐⓑ

ⓕ

ⓖ

ⓒ

ⓓ

ⓐ

ⓔ

1-6)Caution Mark

Position

Caution

1-7) Contents of Marks

Warning

CAUTION

경고

Do not operate without finger guard

and safety devices. Before threading,

changing bobbin and needle, cleaning

etc. switch off main switch.

손가락 보호대와 안전장치 없이 작동하지 마

십시오.

실, 보빈, 바늘교환시나 청소전에는 반드시

주전원의 스위치를 꺼 주십시오.

CAUTION

경고

Hazardous voltage will cause injury.

Be sure to wait at least 360 seconds

before opening this cover after turn

off main switch and unplug a power

cord.

고압 전류에 의해 감전될 수 있으므로 커버

를 열 때는 전원을 내리고 전원 플러그를 뽑

고 나서 360초간 기다린 후 여십시오.

CAUTION

경고

Do not operate without finger guard and

safety devices. Before threading, changing

bobbin and needle, cleaning etc. switch off

main switch.

손가락 보호대와 안전장치 없이 작동하지

마십시오.

실, 보빈, 바늘교환시나 청소전에는 반드시 주

전원의 스위치를 꺼 주십시오.

CAUTION

경고

Hazardous voltage will cause injury.

Be sure to wait at least 360 seconds before

opening this cover after turn off main switch

and unplug a power cord.

고압 전류에 의해 감전될 수 있으므로 커버를

열 때는 전원을 내리고 전원 플러그를 뽑고 나

서 360초간 기다린 후 여십시오.

Caution mark is attached on the machine for safety.

When you operate the machine, observe the directions on the mark.

Position of Warning Mark

SPECIFICATIONS OF THE MACHINE

Series type

Sewing Area

1306

1507

Sewing Speed

Stitch Length

Needle

Needle Bar Stroke

Hook

Bobbin Case

Bobbin

Presser Foot Stroke

Lifting Amount of Presser Foot

Lifting Amount of Feeding Frame

Feeding System

Emergency Stop Function

Pattern Select Function

Memory

2nd Origin Function

Maximum Speed Limit

Number of Patterns

Safety Device

Main Motor

Power Consumption

Recommended Temperature

Recommended Humidity

Power

SPS/B-1306(1507) SPS/A-1306(1507)

(Motor direct drive-type) (Belt drive-type)

X (wide)×Y(length) : 130mm×60mm

X (wide)×Y(length) : 150mm×70mm

Max. 2,500 spm(Stitch Length : 3mm or shorter)

0.1~12.7

DP×17, DP×5

41.2mm

Semi-Rotary Large Shuttle Hook

Bobbin Case for Semi-Rotary Large Shuttle Hook

Bobbin for Large Shuttle Hook

Standard 4mm [ 0.5~10mm ]

Max. 20mm

22mm [ Max. 25mm ]

Feeding by Pulse Motor

Available During Sewing Operation

Pattern No. Can be Selected from No.1 to No.999

3.5″Floppy Diskette (2HD)

Another Origin Point Can be Set by Using Jog Key

The Maximum Speed can be Limited from 200 to 2,500 spm

Max. 691 Patterns / Disk

Emergency Stop Function, Maximum Speed Limit Function

Direct Drive AC Servo Motor

Direct Drive AC Servo Motor 550W Servo Motor

5。C~40。C

20%~80%

1ф: 100~240V, 3ф: 200~440V, 50/60Hz

The Working Point is Stored in the Memory when the

machine stops Abnormally

Memory Backup

STRUCTURE OF THE MACHINE

1) Names of Each Parts of the Machine

Pause Switch

Arm

Thread Stand

Upper Feed Plate

Lower Feed Plate

Power Switch

Control Box

Upper feed plate pedal

Sewing pedal

Manual pedal

Operation Box

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SunStar Nähmaschine Handbücher

SunStar

SunStar SC 7900-Series Bedienungsanleitung

SunStar

SunStar KM-570BL Bedienungsanleitung

SunStar

SunStar KM-815 KM-825 Bedienungsanleitung

SunStar

SunStar KM-757 Bedienungsanleitung

SunStar

SunStar KM-2300 Bedienungsanleitung

SunStar

SunStar SC 7200A Series Bedienungsanleitung

SunStar

SunStar SPS/ D-B1254 Series Bedienungsanleitung

SunStar

SunStar SWF/B Series Bedienungsanleitung

SunStar

SunStar KM-857 Series Bedienungsanleitung

SunStar

SunStar SPS/A-3020 5030 SERIES Bedienungsanleitung

SunStar

SunStar SPS/E-BH-6100 Series Bedienungsanleitung

SunStar

SunStar KM-640UBL-7 Bedienungsanleitung

SunStar

SunStar SPS/B-1507 SERIES Bedienungsanleitung

SunStar

SunStar SPS/D-B1201 SERIES Bedienungsanleitung

SunStar

SunStar SPS/C-5050 Series Bedienungsanleitung

SunStar

SunStar KM-341BL Bedienungsanleitung

SunStar

SunStar SSP-WE/3.5 Bedienungsanleitung

SunStar

SunStar SU-M-26 Bedienungsanleitung

SunStar

SunStar SWF Bedienungsanleitung

SunStar

SunStar SPS/F-2211 Series Bedienungsanleitung

SunStar

SunStar KM-380BL Bedienungsanleitung

SunStar

SunStar SPS/D-BR1254H Bedienungsanleitung

SunStar

SunStar SPS/E-BH3100 Bedienungsanleitung

SunStar

SunStar SPS/E-8050 Series SPS/HT-5050B1 Series Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Singer

Singer 2517 Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Janome

Janome Quilt Maker Pro 18 VERSA Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Brother

Brother BB370 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung