Sunstream FL10 Einrichtungshandbuch
PART NO. 690178 REV: C
FL10, 13, 15 HOVERCOVER
ASSEMBLY , INSTALLATION & USE MANUAL
READ CAREFULLY
KEEP THESE INSTRUCTIONS
FA-HC30144
© SUNSTREAM CORPORATION 2010—ALL RIGHTS RESERVED
PART NO. 690178 REV: C 2
Table of Contents
Disclaimer of Liability 3
Parts List 4-5
Assembly 6-19
Height Adjustment 20
Safety Instructions/Maintenance 21
Warranty 22
Tools Recommended
Socket Wrench, 9/16” & 1/2” sockets
9/16” Wrench
1/2” Wrench
Drill
5/16” & 3/8’ Drill bits
3/8” Nut Driver
Screwdriver
Anti-seize
PART NO. 690178 REV: C 3
These assembly and installation instructions have been provided by Sunstream Corporation at the
request of the potential installer and/or assembler. If you are not an authorized Sunstream Dealer
and are not a reasonably skilled mechanic, please contact Sunstream so that we can refer you to a
local dealer who can skillfully and safely perform the assembly and installation of your Sunstream
boat lift.
It is the potential installer and/or assembler’s responsibility to determine whether he or she has the
necessary skills, knowledge, and tools to properly and safely assemble and/or install the Sunstream
Lift described herein. Improper assembly and/or installation may cause the lift to function im-
properly or not to function. Improper assembly and/or installation may additionally cause a risk to
personal safety or property. If the assembler and/or installer is confused or has questions or con-
cerns about a particular assembly or installation, he or she should contact Sunstream by telephone
at (253)-395-0500, Int’l (001)-(253)-395-0500 before proceeding further. The information con-
tained in these instructions does not constitute a warranty or guarantee of any kind.
An assembler’s and/or installer’s failure to correctly follow these assembly and installation in-
structions constitutes a waiver of the assembler and/or installer’s rights against Sunstream regard-
ing any subsequent damages to property or personal injury caused by the assembler’s and/or in-
staller’s improper assembly and/or installation.
Disclaimer of Liability
PART NO. 690178 REV: C 4
Parts List
SELF THREADING SCREW #14 X 4.00”
11-041602-40
16
34 MACHINE SCREW 5/16” X 3.50”
11-051401-90
BOLT, 3/8” X 2.50”
11-061001-92
BOLT, 3/8” X 3.00”
11-061200-16
BOLT, 3/8” X 2.00”
11-060801-32
SELF DRILLING SCREW #14 X 1.00”
11-000401-93
SELF DRILLING SCREW #14 X 2.00”
11-000001-81
BOLT, 5/16” X 1.50”
11-050600-38
NYLOCK, 5/16”
12-050000-62
NYLOCK, 3/8”
12-060000-22 SNAP BUTTON
15-000001-83
CAP
690501
VELCRO STRAP
69-000001-00
D-RING VELCRO STRAP
690493
WIRE TIE
690255
4
17
4
4
16
25
8
12
55
28
6
10
16 RAFTERS
PART NO. 690178 REV: C 5
Parts List
UPRIGHT AS.
94-000009-30
1
1
8
RAFTER
941624
GUIDE ON
95-000006-19
2
GUIDE ON SLEEVE
44-000008-99
2
FLOAT BRACKET
44-000011-56
6
CLAMP
42-000012-73
12
END BRACKET
95-000008-85
2
SHIM
42-000012-72
2
DIAGONAL BAR
44-000012-66
6
FRAME BRACKET L
95-000007-92
2
FRAME BRACKET R
95-000007-93
2
END FLOAT BRACKET L
95-000008-87
1
END FLOAT BRACKET R
95-000008-86
1
PVC ELBOW
44-000011-69
4
UNION SLEEVE
44-000011-72
6
FRAME TUBE AS.
95-000009-27
1
BAG 1
1 OWNERS MANUAL 690178
STOP TUBE
440627
4
PART NO. 690178 REV: C 6
Assembly
Outer PVC Guide
Inner Aluminum Guide
Outer Telescoping Linkage
Inner Telescoping Linkage
Snap Button
Assemble all Telescoping Linkages Assemble all Slide Tubes
Note orientation
PART NO. 690178 REV: C 7
Assembly
IMPORTANT:
Do not over tighten bolt. Squeezing the frame bracket prevents Linkage from pivoting.
Assemble all Uprights
PVC Guide
Bolt, 3/8” x 3.00”
Nylock 3/8”
Bolt, 3/8” x 2.50”
Nylock 3/8”
Frame Bracket
Telescoping
Linkage
PART NO. 690178 REV: C 8
Assembly
Ensure all Velcro Strap hooks & loops face to inside of frame.
VELCRO STRAP
NYLOCK, 3/8”
5/16” X 3.50”
MACHINE SCREW
Side Tube
IMPORTANT:
Ensure Side Tube dimensions are as follows:
Holes 5” from end connect to PVC Elbow.
Holes 7” from end connect to Union Sleeve.
PVC Elbow
Union Sleeve
6 ft Center Tube
7”
Note rafter hole orientation
End Tube
End Tube
18X
18X
10X
5”
Assemble Frame
PART NO. 690178 REV: C 9
Assembly
#14 x 4.00”
Self Threading Screw
D-Ring Velcro Strap
Ensure all Velcro Strap hooks & loops face to inside of frame.
16X
16X
Secure rafters.
PART NO. 690178 REV: C 10
Assembly
Remove Guide-on caps from existing guide-ons.
Install additional guide-ons and drop stop tubes down guide-ons.
Set guide-ons to desired boat beam width.
Bolt 3/8” X 3.00”
Nylock 3/8”
Guide-on Sleeve
6X
2X
Install End Float Brackets
FWD
2X
End Float Bracket L
End Float
Bracket R
End Float
Bracket L
Stop tubes
4X
Andere Handbücher für FL10
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Sunstream Bootsausrüstung Handbücher
Sunstream
Sunstream FL10014 Technische Daten
Sunstream
Sunstream BOAT LIFTS FL6012 Einrichtungshandbuch
Sunstream
Sunstream BOAT LIFTS FL13018 Einrichtungshandbuch
Sunstream
Sunstream SunLift SLX 5010 Bedienungsanleitung
Sunstream
Sunstream FL6 HOVERCOVER Bedienungsanleitung
Sunstream
Sunstream FL15023 Technisches Datenblatt
Sunstream
Sunstream FL10 Gebrauchsanweisung
Sunstream
Sunstream FL-24020D Bedienungsanleitung
Sunstream
Sunstream FL15023 Bedienungsanleitung
Beliebte Bootsausrüstung Handbücher anderer Marken
Dowco
Dowco V322 CC - 2019 Bedienungsanleitung
Humphree
Humphree HCS-5 Bedienungsanleitung
Vetus
Vetus BOW4512D Technisches Datenblatt
Dock Doctors
Dock Doctors SLIDING BOARDING STEP Bedienungsanleitung
Mastervolt
Mastervolt Mass Combi 12/2000-100 Original Betriebsanleitung
Zattini Group
Zattini Group bamar BOXTRON E14S Benutzerhandbuch
