Sunwave Tech. SRC-3000 Bedienungsanleitung
SRC-3000
Touch Screen Remote Control
User’s Manual
030821
1
Preface
About this manual
This manual is designed to make using the SRC-3000 Touch
Screen Remote Control as easy as possible. Information in
this document has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the
contents. The information in this document is subject to
change without notice.
Copyright
© Copyright 2003
This document contains proprietary information protected
by copyright. All rights are reserved. No part of this manual
may be reproduced by any mechanical, electronic or
other means, in any form, without the prior written
permission of Sunwave Technology Corporation.
Trademarks
All trademarks and registered trademarks are the property
of their respective owners.
SUNWAVE Customer Service & Support Info
E-Mail: info@sun-wave.com
URL: www.sun-wave.com
SRC-3000 User’s Manual
2
Table of Contents
Chapter 1 Introducing the SRC-3000 ................4
SRC-3000 Features ....................................................................... 5
Unpacking the SRC-3000 ............................................................ 5
Identifying Components ............................................................. 6
Chapter 2 Getting Started .................................7
Installing Batteries......................................................................... 7
Battery Indicator .................................................................. 7
Battery Tips and Precautions.............................................. 8
About the Touch Screen............................................................. 9
Turning the Touch Screen On............................................. 9
Touch Screen Precautions.................................................. 9
Using the Touch Screen Soft Keys.................................... 10
Accessing Setup................................................................. 10
Chapter 3 Setting Up the SRC-3000................12
LCD Layout: Device Keys.......................................................... 12
Code and Learn Setting Key.................................................... 14
Using Pre-programmed Code to Program Devices ............. 15
Using Code Learning Mode ..................................................... 18
Before Using Learning Mode............................................ 18
Learning from Another Remote Control ........................ 19
Erasing Key Codes and Device Codes (Delete) .......... 21
SRC-3000 Features
3
Using Macros .............................................................................. 22
Creating a New Macro .................................................... 22
Resetting the SRC-3000 to Factory Defaults .......................... 24
Chapter 4 Miscellaneous Settings..................25
Using the Transmission Feature ................................................ 25
Setting the Backlight Mode...................................................... 27
Set Backlight On Mode..................................................... 27
Set Backlight Sensor Sensitivity......................................... 28
Setting the Beep Signal............................................................. 29
Chapter 5 Controlling Devices .......................30
Alternating Touch Screen Pages............................................. 30
Viewing the Macro Key ............................................................ 30
Macro Interruption..................................................................... 31
Controlling Devices ................................................................... 32
Appendix A Functions and Specifications..33
Functions ..................................................................................... 33
Specifications ............................................................................. 34
Appendix B Accessories ...............................35
Appendix C Troubleshooting........................36
Troubleshooting Tables ............................................................. 36
SRC-3000 User’s Manual
4
Chapter 1 Introducing the SRC-3000
Congratulations on your purchase of the SRC-3000 Touch
Screen Remote Control. The SRC-3000 is a digital universal
remote control that is easy to use, enabling you to control
all of your electronic devices equipped with an infrared (IR)
remote.
The SRC-3000 uses a user-friendly Touch Screen panel. You
can control up to eight devices, including VCRs, DVDs, TVs,
and satellite dishes.
The SRC-3000 enables you to quickly configure each device
in your household or office using the innovative “learning
eye” feature. In addition, the advanced macro function
enables you to initiate a chain of up to 60 commands with
the touch of a single key.
Convenient and easy to use, the SRC-3000 provides you
with a complete central control solution.
NOTE: This manual helps you learn how to use the
advanced features of the SRC-3000. It does not explain how
to use the functions for your devices. Please refer to your
device user’s manual for information related to your device.
SRC-3000 Features
5
SRC-3000 Features
The following list identifies the SRC-3000’s key features.
•Large Touch Screen display
•Macro sequence function—each macro can store 60
commands
•Eight device controls, including DVDs, TVs, Satellite
Receivers, VCRs, and CDs
•IR code learning from your existing remote controls to
quickly set up devices
•Pre-programmed manufacturer’s codes for many
models
•User programmable keys for each device, up to 56
keys in total
•Automatic Power Saving mode turns off the remote
after 90 seconds of inactivity
Unpacking the SRC-3000
After you have unpacked the SRC-3000, check the
contents to make sure the following items are included.
•SRC-3000
•User’s Manual
•Pre-programmed Code List
If any of the above items are missing or appear damaged,
contact your dealer immediately. Do not throw the
shipping carton away in case you need to ship your
SRC-3000.
SRC-3000 User’s Manual
6
Identifying Components
Refer to the following illustration to identify the components
of the SRC-3000.
Infrared Eye
Point the infrared eye at
the device you want to
operate.
Light Sensor
Detects ambient light to
automatically set the LCD
panel backlight.
LCD Touch Screen
The soft keys enable you to
change settings, configure
the SRC-3000, create
macros, and more.
Backlight
The SRC-3000 is equipped
with a blue backlight that
lights up for a preset
period, according to the
ambient lighting conditions.
Device keys
Press these keys to display
layout screens for the
devices listed.
Learning Eye
Point your device’s remote
control at the learning eye
to enable the SRC-3000 to
learn your device’s infrared
codes.
Figure 1: Front View
Infrared Eye
Light Sensor
LCD Touch
Screen
Backlight
Device Keys
Learning Eye
7
Chapter 2 Getting Started
This chapter provides you with the information to quickly
start using the SRC-3000.
Installing Batteries
The SRC-3000 operates on three AAA alkaline batteries (not
included). Batteries must be inserted before you can
operate the SRC-3000.
1. Turn the remote over, push the tab in the direction of
the arrow on the battery cover and lift the cover off.
2. Insert the batteries, matching the batteries to the (+)
and (–) marks inside the battery case.
3. Snap the battery cover back into place.
Battery Indicator
A battery icon is displayed in the upper left-hand corner
above the System Setup Key:
Battery low icon
Figure 2: The Battery Low Icon
When the batteries are almost depleted, the battery low
icon appears.
Installing Batteries
8
Battery Tips and Precautions
•Pay attention to the batteries when the battery half full
icon appears and replace batteries if needed.
•The SRC-3000 will not lose programmed data when
batteries are replaced.
•Always use fresh batteries. Alkaline batteries are
recommended. Do not mix different types of batteries.
•Be sure that the positive (+) and negative (–) polarities
of the batteries match the diagram shown in the
compartment.
•Do not expose the batteries to excessive heat or
flame.
•Keep batteries out of the reach of children.
•Weak batteries reduce the effective distance of the
unit.
•To reduce danger of leakage and damage, remove
batteries that have been used for more than two
years.
Inhaltsverzeichnis
Andere Sunwave Tech. Fernbedienung Handbücher
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. SRC-3310/9320 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. SRC-3820 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. SRC-3810 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. 3815 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. SRC-3000b Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
