Sunwave Tech. SRC-3000b Bedienungsanleitung
SRC-3000b
Touch Screen Smart Remote Control
User’s Manual
040130
i
Preface
About this manual
This manual is designed to make it easy to use the SRC-
3000b Touch Screen Remote Control as easy as possible.
Information in this document has been carefully checked
for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this
document is subject to change without notice.
Copyright
© Copyright 2004
This document contains proprietary information protected
by copyright. All rights are reserved. No part of this manual
may be reproduced by any mechanical, electronic or
other means, in any form, without the prior written
permission of SUNWAVE Technology Corporation.
Trademarks
All trademarks and registered trademarks are the property
of their respective owners.
SUNWAVE Customer Service & Support Info
E-Mail: info@sun-wave.com
URL: www.sun-wave.com
ii
Table of Contents
Chapter 1 Introducing the SRC-3000b .............1
1.1 SRC-3000b Features............................................................... 2
1.2 Unpacking the SRC-3000b.................................................... 2
1.3 Identifying Components....................................................... 3
Chapter 2 Getting Started .................................4
2.1 Inserting the Batteries ............................................................ 4
2.1.1 Battery Indicator...................................................... 4
2.1.2 Battery Tips and Precautions ................................. 5
2.2 About the Touch Screen....................................................... 6
2.2.1 Turning the Touch Screen On................................ 6
2.2.2 Touch Screen Precautions ..................................... 6
2.2.3 Using the Touch Screen Soft Keys ......................... 7
2.2.4 Accessing Setup...................................................... 7
Chapter 3 Setting Up the SRC-3000b................9
3.1 Customizing the LCD Layout................................................ 9
3.2 Code and Learn Setting Key ............................................. 11
3.3 Using Pre-programmed Code to Program Devices ....... 12
3.4 Using Learning Function to Customize SRC-3000b ......... 15
3.4.1 Before Using Learning Function .......................... 15
3.4.2 Learning from Another Remote Control............ 15
3.4.3 Deleting Key Codes and Device Codes........... 19
3.5 Resetting the SRC-3000b to Factory Defaults.................. 20
3.6 Macro Function.................................................................... 22
iii
3.6.1 Creating a Macro................................................. 22
3.6.2 An example to create a Macro ........................ 24
3.6.3 Macro Interruption................................................ 26
3.6.4 Viewing the Macro Key ....................................... 26
Chapter 4 Miscellaneous Settings..................27
4.1 Using the Transmission Function......................................... 27
4.2 Setting the Backlight ........................................................... 29
4.2.1 Setting the Backlight............................................. 29
4.2.2 Setting Backlight Sensitivity................................. 30
4.3 Turning Off the Beep Signal ............................................... 31
Chapter 5 Controlling Devices .......................32
5.1 Alternating Between Screens ............................................ 32
5.2 Controlling Devices ............................................................. 32
Appendix A Functions and Specifications...33
Functions ..................................................................................... 33
Specifications ............................................................................. 34
Appendix B Accessories ...............................35
Appendix C Troubleshooting........................36
Troubleshooting Tables ............................................................. 36
1
Chapter 1 Introducing the SRC-
3000b
Congratulations on your purchase of the SRC-3000b Touch
Screen Remote Control. The SRC-3000b is a digital universal
remote control that is easy to use, enabling you to control
all of your electronic devices equipped with an infrared (IR)
remote.
The SRC-3000b uses a user-friendly Touch Screen panel. You
can control up to eight devices, including VCRs, DVDs, TVs,
and satellite dishes.
The SRC-3000b enables you to quickly configure each
device in your household or office by using the innovative
“learning eye” feature. In addition, the advanced Macro
function enables you to initiate a chain of up to 60
commands with the touch of a single key.
The SRC-3000b, a simple and user-friendly remote, provides
you with a complete central control solution.
NOTE:
This manual helps you to learn how to use the advanced
features of the SRC-3000b. However, it does not explain how
to use the functions of your devices. Please refer to the user’s
manuals of your devices for further information.
SRC-3000B User’s Manual
2
1.1 SRC-3000b Features
zLarge touch screen display
zMacro function, each Macro can store 60
commands at most
zControls up to eight devices including DVDs, TVs,
Satellite Receivers, VCRs, and CDs
zLearns the IR codes from your existing remotes to
control your devices quickly
zPre-programmed codes for many remote controls
zUser-programmable keys for each device, up to 56
keys in total
zAutomatic shutoff after 90 seconds of inactivity
1.2 Unpacking the SRC-3000b
After unpacking the SRC-3000b, please check out the
contents to make sure that the following items are included.
1. SRC-3000b
2. User’s Manual
3. Pre-programmed Code List
If any of the above items is missing or appears to be
damaged, please contact your dealer immediately. Please
do not throw the package away in case you need to ship
your SRC-3000b.
1.3 Identifying Components
3
1.3 Identifying Components
Refer to the following illustration to identify the components of
the SRC-3000b.
1. Infrared Eye
Point the infrared eye at
the device you want to
operate.
2. Light Sensor
Detects ambient light to
automatically turn on the
backlight.
3. LCD Touch Screen
The LCD panel enables you
to configure and operate
your devices by touching
the screen.
4. Backlight
Automatic blue backlight
illuminates in a dim
environment.
5. Device keys
Press these keys to display
the LCD layouts for the
specific devices as below.
6. Learning Eye
Point your original remote
control to the learning eye
and press the
corresponding keys to send
out the IR signals; so that
the SRC-3000b can learn
the IR codes for your
devices.
Figure 1: Front View
1. Infrared Eye
2. Light Sensor
3.
LCD Touch Screen
4. Backlight
5. Device Keys
6. Learning Eye
4
Chapter 2 Getting Started
This chapter provides the information helping you to use the
SRC-3000b quickly.
2.1 Inserting the Batteries
The SRC-3000b operates on three AAA alkaline batteries
(not included in the package). Batteries must be inserted
before you can operate the SRC-3000b.
1. Lift the battery cover.
2. Insert three AAA batteries according to the polarities
inside the battery compartment.
3. Snap the battery cover back.
2.1.1 Battery Indicator
Battery low icon
Figure 2: The Battery Low Icon
When the power of batteries is weak, the “battery low” icon
is displayed in the upper right corner.
2.1 Inserting the Batteries
5
2.1.2 Battery Tips and Precautions
1. The SRC-3000b will not lose programmed data when
batteries are replaced.
2. Please always use fresh batteries. Alkaline batteries
are recommended. Do not mix different types of
batteries.
3. Ensure that positive (+) and negative (–) polarities of
the batteries match the diagram inside the
compartment.
4. Do not expose the batteries to excessive heat or
flame.
5. Keep batteries out of the reach of children.
6. Weak batteries reduce the effective distance of the
unit. Replace batteries immediately when the
icon appears.
7. To reduce the danger of leakage, remove batteries
when used longer than two years.
SRC-3000B User’s Manual
6
2.2 About the Touch Screen
The Touch Screen changes the number of soft keys
according to the device that is selected.
2.2.1 Turning the Touch Screen On
Turn on the SRC-3000b by touching the screen. The SRC-
3000b turns itself off after 90 seconds of inactivity.
2.2.2 Touch Screen Precautions
Please review the following information carefully before
using the SRC-3000b.
1. Tap the LCD Touch Screen gently.
2. Do not use a pen or any sharp object to tap the
screen.
3. The SRC-3000b is not waterproof. Keep the touch
screen dry and never immerse it in liquid. Wipe off
any spills immediately.
4. Don’t expose SRC-3000b to extreme temperatures.
Keep it away from heat sources.
5. Avoid dropping the SRC-3000b or putting anything
on the touch screen.
6. Clean the LCD touch screen with a soft cloth. If
needed, dampen the cloth slightly before cleaning.
Never use abrasives or cleaning solutions.
Inhaltsverzeichnis
Andere Sunwave Tech. Fernbedienung Handbücher
Sunwave Tech.
Sunwave Tech. SRC-3310/9320 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. SRC-3820 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. SRC-3810 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. 3815 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. SRC-3000 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
