3
ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your 5 in 1 Multi-Game Table. This cabinet is very
heavy, and it is recommended that at least two strong adults turn the cabinet onto its assembled
legs and End Panels.
2. Remove all of the content from the box and verify that you have all of the listed parts as shown on
the Parts Identifier Page. Carefully cut or tear the four carton corners so that the bottom of the box
will lay flat and can serve as your work area.
3. Use the Glue (#39) provided to assemble each Leg (#9 , #10) as shown in FIG.1
Attach the Leg Bases (#11) to the bottom of the legs using three Screws (#25) per Leg Base.
4. After having completed the assembly of the leg bases, screw the Leg Levelers (#13) into the bottom
of each leg. Remove any glue residue with a damp cloth before it dries.
5. Attach the Catcher Boxes (#4) to the End Panels (#3) using four Screws (#25) per Catcher Box.
6. Slide the Lock Pins (#14) into the holes of the End Panels (#3) and screw them using four Screws
(#27) per Lock Pin.
FIG. 1 LEGS ASSEMBLY
FIG. 2 LOCK PIN AND CATCHER BOX ASSEMBLY
Note：The nut side must be facing upwards. See FIG. 1A.
The nut side must
be facing upwards
FIG. 1
FIG. 2
Tools required: Wrench ( Provided )
Screwdriver - Flat Head
