Supermicro SC213 Series Bedienungsanleitung



SC213AC-R1K23LPB SC213AC-R1K23WB

SC213AC-R920LPB SC213AC-R920WB

SC213A-R740LPB SC213A-R740WB

SC213A-R720LPB SC213A-R720UB

SC213A-R900LPB

SC213BAC8-R1K23WB

SC213A-R900UB

SC213BAC8-R1K23LPB

USER’S MANUAL

1.1

Manual Revision 1.1

Release Date: July 06, 2022

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the chassis. Installation and

maintenance should be performed by experienced technicians only.

This document lists compatible parts available when this document was published.

Refer to the Supermicro web site f

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SC213 Chassis Manual

Contents

Contacting Supermicro ................................................................................................vii

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping List.................................................................................................... 1-2

1-3 Chassis Features ............................................................................................ 1-2

Motherboard Support ...................................................................................... 1-2

Drives .............................................................................................................. 1-2

PCI Expansion Slots ....................................................................................... 1-2

Cooling ............................................................................................................ 1-2

Control Panel .................................................................................................. 1-2

Cables ............................................................................................................. 1-2

1-4 Returning Merchandise for Service................................................................. 1-3

1-5 Where to Get Replacement Components....................................................... 1-3

Chapter 2 Rack Installation

2-1 Unpacking the System .................................................................................... 2-1

2-2 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-3 Warnings and Precautions .............................................................................. 2-2

Rack Precautions ............................................................................................ 2-2

General Server Precautions............................................................................ 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

󰀩 ......................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack .................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Releasing the Inner Rail ................................................................................. 2-5

Installing the Inner Rails on the Chassis ........................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Sliding the Chassis onto the Rack Rails......................................................... 2-8

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Power .............................................................................................................. 3-2

Preface

Reset............................................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Power .............................................................................................................. 3-2

HDD................................................................................................................. 3-2

NIC2 ................................................................................................................ 3-3

NIC1 ................................................................................................................ 3-3

Information LED .............................................................................................. 3-3

Power Fail ....................................................................................................... 3-3

Overheating..................................................................................................... 3-4

Overheat Temperature Setting ................................................................... 3-4

Responses.................................................................................................. 3-4

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-5

Chapter 4 Chassis Setup and Maintenance

4-1 Overview ......................................................................................................... 4-1

4-2 Removing Power from the System ................................................................. 4-2

4-3 Removing the Chassis Cover ......................................................................... 4-3

4-4 Installing Hard Drives...................................................................................... 4-4

Installing the Rear 2.5" Hard Drive Cage ....................................................... 4-6

Installing the Rear Drives into Carriers........................................................... 4-8

4-5 Installing Expansion Cards ............................................................................. 4-9

Expansion Cards for an LP Model Chassis.................................................... 4-9

Expansion Cards for a W or U Model Chassis............................................... 4-9

4-6 Installing the Air Shroud................................................................................ 4-12

4-7 Power Supply................................................................................................ 4-14

4-8 Installing the Power Distributor ..................................................................... 4-15

4-9 Removing the Backplane .............................................................................. 4-16

Appendix A SC213 Power Supply Specications

Appendix C BPN-SAS-213A Backplane Specications

C-1 ESD Safety Guidelines ...................................................................................C-1

C-2 General Safety Guidelines ..............................................................................C-1

C-3 Version Information .........................................................................................C-2

C-4 Rear Connectors and Jumpers.......................................................................C-3

  ...............................................................C-4

C-6 Rear Jumper ...................................................C-6

Explanation of Jumpers ..................................................................................C-6

I2C and SGPIO Modes and Jumper Settings .................................................C-7

SC213 Chassis Manual

Rear LED Indicators........................................................................................C-8

C-7 Front Components, Connectors and LED Indicators......................................C-9

Appendix D BPN-SAS3-213A Backplane Specications

D-1 ESD Safety Guidelines ...................................................................................D-1

D-2 General Safety Guidelines ..............................................................................D-1

D-3 Version Information .........................................................................................D-2

D-4 Rear Connectors .............................................................................................D-3

Front Connectors ............................................................................................D-3

  ...............................................................D-4

D-6 Rear Jumper ...................................................D-5

Explanation of Jumpers ..................................................................................D-5

D-7 Front Connectors and LED Indicators ............................................................D-6

Appendix E BPN-SAS3-213A-N8 Backplane Specications

E-1 ESD Safety Guidelines ...................................................................................E-1

E-2 General Safety Guidelines ..............................................................................E-1

E-3 A Note to Users...............................................................................................E-1

E-4 Introduction to the BPN-SAS3-213A-N8 Backplane .......................................E-2

E-5 Front Connectors ............................................................................................E-3

Front Connectors ............................................................................................E-3

 ...............................................................E-4

E-7 Front Jumpers.................................................................................................E-5

Explanation of Jumpers ..................................................................................E-5

E-8 Rear Components, Connectors, and LED Indicators .....................................E-7

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Web Site: www.supermicro.com.tw

vii

Preface

1-1

Chapter 1: Introduction

SC213 Chassis Series

Model HDD PCI Slots Power Supply

SC213AC-R1K23LPB 16x 2.5" hot-

swap SAS/SATA 7x LP 1200W (Redundant, Titanium)

SC213AC-R1K23WB 16x 2.5" hot-

swap SAS/SATA

4x FH &

3x LP 1200W (Redundant, Titanium)

SC213BAC8-R1K23WB 16x 2.5" hot-

swap SAS/SATA

4x FH &

3x LP 1200W (Redundant, Titanium)

SC213BAC8-R1K23LPB 16x 2.5" hot-

swap SAS/SATA 7x LP 1200W (Redundant, Titanium)

SC213AC-R920LPB 16x 2.5" hot-

swap SAS/SATA 7x LP 920W (Redundant, Platinum)

SC213AC-R920WB 16x 2.5" hot-

swap SAS/SATA

4x FH &

3x LP 920W (Redundant, Platinum)

SC213A-R740LPB 16x 2.5" hot-

swap SAS/SATA 7x LP 740W (Redundant, Platinum)

SC213A-R740WB 16x 2.5" hot-

swap SAS/SATA

4x FH &

3x LP 740W (Redundant, Platinum)

SC213A-R720LPB 16x 2.5" hot-

swap SAS/SATA 7x LP 720W (Redundant, Gold)

SC213A-R720UB 16x 2.5" hot-

swap SAS/SATA

4x FH &

3x LP 720W (Redundant, Gold)

SC213A-R900LPB 16x 2.5" hot-

swap SAS/SATA 7x LP 900W (Redundant)

SC213A-R900UB 16x 2.5" hot-

swap SAS/SATA

4x FH &

3x LP 900W (Redundant)

Chapter 1

Introduction

1-1 Overview

The Supermicro SC213 chassis features a direct-attached SAS3 backplane

supporting sixteen 2.5" SAS/SATA hard disk drives. It has dual highly e󰀩cient

redundant power supplies, an optional DVD drive, two USB ports, three 80mm

fans, and room for seven PCI Express expansion cards.

SC213 Chassis Manual

1-2

1-2 Shipping List

Visit the Supermicro web site for the latest shipping lists and part numbers for

your particular chassis model at www.supermicro.com.

1-3 Chassis Features

The SC213 3U high-performance chassis includes the following features:

Motherboard Support

The chassis supports motherboard sizes of 13.68" x 13.0", E-ATX, ATX form factors.

It supports dual and single Intel and AMD processors.

Drives

The chassis supports up to sixteen 2.5" hot-swap SAS or SATA drives with SES2.

With RAID, these drives may be replaced without powering down the server. It also

supports one slim DVD drive (optional).

PCI Expansion Slots

Each version of the chassis includes seven slots with sizes depending on the model.

Cooling

Three hot-plug 80mm fans provide cooling, aided by an air shroud. The 4-pin fans

are controlled though IPMI.

Control Panel

The front control panel includes system status LED indicators and power switches.

Cables

To determine what cables are needed for your system, check the connector type

of your system backplane and motherboard. Then consult the Supermicro website.

https://www.supermicro.com/ResourceApps/Cable_Matrix.aspx

1-3

Chapter 1: Introduction

1-4 Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your vendor

for a Returned Merchandise Authorization (RMA) number. When returning to the

manufacturer, the RMA number should be prominently displayed on the outside of

the shipping carton, and mailed prepaid or hand-carried. Shipping and handling

charges will be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online (http://www.

supermicro.com/support/rma/).

Whenever possible, repack the chassis in the original Supermicro carton, using the

original packaging material. If these are no longer available, be sure to pack the

chassis securely, using packaging material to surround the chassis so that it does

not shift within the carton and become damaged during shipping.

This warranty only covers normal consumer use and does not cover damages

incurred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor rst for any product problems.

1-5 Where to Get Replacement Components

Although not frequently, you may need replacement parts for your system. To

ensure the highest level of professional service and technical support, we strongly

recommend purchasing exclusively from our Supermicro Authorized Distributors/

System Integrators/Resellers. A list of Supermicro Authorized Distributors/System

Integrators/Resellers can be found at: www.supermicro.com. Click the Where to

Buy link

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Chassis Handbücher

Supermicro

Supermicro SC116B Bedienungsanleitung

Supermicro

Supermicro SC101F Bedienungsanleitung

Supermicro

Supermicro SC213XAC-R1K05LP Bedienungsanleitung

Supermicro

Supermicro SC216BAC-R920LPB Bedienungsanleitung

Supermicro

Supermicro SC743TQ-865B-SQ Bedienungsanleitung

Supermicro

Supermicro CSE-LB16-AW Bedienungsanleitung

Supermicro

Supermicro Supero SC808T-980B Bedienungsanleitung

Supermicro

Supermicro SCLA26 Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Supermicro

Supermicro SC510-200B Bedienungsanleitung

Supermicro

Supermicro SC836BE1C-R1K03B Bedienungsanleitung

Supermicro

Supermicro Supero SC933S1-R760B Bedienungsanleitung

Supermicro

Supermicro SCGS5 Series Bedienungsanleitung

Supermicro

Supermicro SC523 Series Bedienungsanleitung

Supermicro

Supermicro SC745BAC-R1K28B2 Bedienungsanleitung

Supermicro

Supermicro Supero SC842TQ-665B Bedienungsanleitung

Supermicro

Supermicro Supero SC936 Series Bedienungsanleitung

Supermicro

Supermicro SC812L-520 Bedienungsanleitung

Supermicro

Supermicro SC846X Bedienungsanleitung

Supermicro

Supermicro SC735D4 Bedienungsanleitung

Supermicro

Supermicro SC846BE2C-R1K28B Bedienungsanleitung

Supermicro

Supermicro SC113M Series Bedienungsanleitung

Supermicro

Supermicro SC513B Series Bedienungsanleitung

Supermicro

Supermicro SC825MTQ-R700LPB Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung

Cisco

Cisco Nexus 7010 Bedienungsanleitung

JYTEK

JYTEK PXIe-62780 Bedienungsanleitung

HP StorageWorks P2000 Leitfaden