Supermicro BPN-SAS2-936EL Series Bedienungsanleitung

L2 L1

PRI_J0

PRI_J1

PRI_J2

SEC_J0

SEC_J1

SEC_J2

EC27

EC26

EC5

C366

C365

C367

EC2

C132

C133

C120

C119

C134

C121

L59

C390

BCA84

C76

C67

C91

J16

J19

JP1

SEC_MODE1

SEC_MODE2

PRI_MODE1

PRI_MODE2

PRI_I2C1

UART_P1

EXPDBG1

14UART_S1

EXPDBG2

U13

U18

10 15

25 28

10 15

J18

FAN2

FAN3

FAN1

EC4

EC1

EC9

EC8

EC20

EC17

EC16

EC14

EC13

EC11

EC10

C361

C363

C362

C128

1.01REV:

SAS2-936EL2

MACHFINISH

ANGLE

SPECIFIEDDIMENSIONS

UNLESSOTHERWISE

XXX

.010

.03

TOLERANCES

DECIMAL

AREIN INCHES

TeddyTsai/Amo

DESIGNER:

DATE: 201003 20

PROJECT NAME:

SANJOSE,CA 95131

DESIGNEDBY SUPERMICRO U.S.A.

www.supermicro.com

TEL:408-503-8000FAX:408-503-8008

SILKSCREEN

PRIMARY-SIDE

UPER

RRRRRRRRRR

MH13

MH9

MH10

MH11

MH12

MH5

MH6

MH7

MH8

SAS2-936EL2

REV: 1.01

WWN BAR CODE

PWR4

GNDGND +12V+5V +5V +12V

GND GND

PWR1

+5V +12V

GND GND

PWR2

+5V +12V

GND GND

PWR3

ACT17

ACT18

A C

12V_LED1

5V_LED1

FANFAIL1

OVERHEATFAIL1

AC1

FANFAIL_LED_DISABLE

MDIO2

ACTLED1

FAN_MONITOR_DISABLE

MDIO1

BUZZER_ENB1

BPN-SAS2-936EL1/EL2

USER’S GUIDE

1.0b

Downloaded from Arrow.com.

BPN-SAS2-936EL Series Backplane User's Guide

Manual Revision 1.0a

Release Date: September 27, 2015

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Downloaded from Arrow.com.Downloaded from Arrow.com.

iii

Preface

Table of Contents

Contacting Supermicro.......................................................................................iv

Returning Merchandise for Service.....................................................................v

Chapter 1 Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 An Important Note to Users ............................................................................ 1-2

1-4 Introduction to the BPN-SAS2-936EL Backplane........................................... 1-2

Chapter 2 Connectors, Jumper and LEDs

2-1 Front Connectors and Jumpers ...................................................................... 2-1

Front Connectors ............................................................................................ 2-1

2-2 FrontConnectorandPinDenitions............................................................... 2-2

2-3 Front JumperLocationsandPinDenitions................................................... 2-3

Explanation of Jumpers .................................................................................. 2-3

Front LED Indicators ....................................................................................... 2-5

2-4 Rear Connectors and LED Indicators............................................................. 2-6

Chapter 3 Dual Port and Cascading Congurations

3-1 Single and Dual Port Expanders ................................................................... 3-1

Single Ports..................................................................................................... 3-1

Dual Ports ....................................................................................................... 3-1

3-2 Failover............................................................................................................ 3-2

3-3 Failover with RAID Cards and Multiple HBAs ................................................ 3-3

3-4 Cables and Chassis Power Card ................................................................... 3-4

Chassis Power Card ....................................................................................... 3-4

Connecting an Internal Host Bus Adapter to the Backplane ......................... 3-5

Supported Internal HBA to Backplane Cables................................................ 3-6

Connecting an External Host Bus Adapter to the Backplane ........................ 3-7

Supported External HBA to Backplane Cable ................................................ 3-8

Connecting Multiple Backplanes in a Single Channel Environment............... 3-9

SingleHBAConguration ............................................................................... 3-9

SingleHBACongurationCables ................................................................. 3-10

Connecting Multiple Backplanes in a Dual Channel Environment ................3-11

DualHBACongurationCables.................................................................... 3-12

3-5 SupportedCascadingConguration ............................................................ 3-13

ServerSystemwithDualSASHBAandCascadingConguration .............. 3-14

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

BPN-SAS2-936EL Series Backplane User's Guide

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Website: www.supermicro.com.tw

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Preface

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

to the manufacturer, the RMA number should be prominently displayed on the

outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and

handling charges will be applied for all orders that must be mailed when service

is complete.

For faster service, RMA authorizations may be requested online (http://www.super-

micro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

Duringthewarrantyperiod,contactyourdistributorrstforanyproductproblems.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

BPN-SAS2-936EL Series Backplane User's Guide

Notes

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

1-1

Chapter 1: Safety Guidelines

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

are generally sufcient to protect your equipment from ESD.

•Use a grounded wrist strap designed to prevent static discharge.

•Touch a grounded metal object before removing a component from the antistatic

bag.

•Handle the backplane by its edges only; do not touch its components, peripheral

chips, memory modules or gold contacts.

•When handling chips or modules, avoid touching their pins.

•Put the card and peripherals back into their antistatic bags when not in use.

1-2 General Safety Guidelines

•Always disconnect power cables before installing or removing any components

from the computer, including the SAS2-936EL series backplane.

•Make sure that the backplane is properly and securely on the motherboard to

prevent damage to the system due to power outages.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

1-2

SAS2-936EL Series Backplane User's Guide

1-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest back-

plane revision available at the time of publishing. The card you have received may

or may not look exactly the same as the graphics shown in this manual.

1-4 Introduction to the SAS2-936EL Backplane

The SAS2-936EL backplane has been designed to utilize the most up-to-date tech-

nology available, providing your system with reliable, high-quality performance.

ThismanualreectsSAS2-936ELRevision1.01,themostcurrentreleaseavailable

at the time of publication. Always refer to the Supermicro Web site at www.super-

micro.comforthelatestupdates,compatiblepartsandsupportedcongurations.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

2-1

Chapter 2: Connectors, Jumpers and LEDs

L2 L1

PRI_J0

PRI_J1

PRI_J2

SEC_J0

SEC_J1

SEC_J2

EC27

EC26

EC5

C366

C365

C367

EC2

C132

C133

C120

C119

C134

C121

L59

C390

BCA84

C76

C67

C91

J16

J19

JP1

SEC_MODE1

SEC_MODE2

PRI_MODE1

PRI_MODE2

PRI_I2C1

UART_P1

EXPDBG1

14UART_S1

EXPDBG2

U13

U18

10 15

25 28

10 15

J18

FAN2

FAN3

FAN1

EC4

EC1

EC9

EC8

EC20

EC17

EC16

EC14

EC13

EC11

EC10

C361

C363

C362

C128

1.01REV:

SAS2-936EL2

MACHFINISH

ANGLE

SPECIFIEDDIMENSIONS

UNLESSOTHERWISE

XXX

.010

.03

TOLERANCES

DECIMAL

AREIN INCHES

TeddyTsai/Amo

DESIGNER:

DATE: 2010 03 20

PROJECT NAME:

SANJOSE,CA 95131

DESIGNEDBY SUPERMICRO U.S.A.

www.supermicro.com

TEL:408-503-8000FAX:408-503-8008

SILKSCREEN

PRIMARY-SIDE

UPER

RRRRRRRRRR

MH13

MH9

MH10

MH11

MH12

MH5

MH6

MH7

MH8

SAS2-936EL2

REV: 1.01

WWN BAR CODE

PWR4

GNDGND +12V+5V +5V +12V

GND GND

PWR1

+5V +12V

GND GND

PWR2

+5V +12V

GND GND

PWR3

ACT17

ACT18

A C

12V_LED1

5V_LED1

FANFAIL1

OVERHEATFAIL1

AC1

FANFAIL_LED_DISABLE

MDIO2

ACTLED1

FAN_MONITOR_DISABLE

MDIO1

BUZZER_ENB1

Chapter 2

Connectors, Jumper and LEDs

2-1 Front Connectors and Jumpers

Front Connectors

1. EPP connectors: J16 and J19

2. Primary and secondary expander

chips

3. Power connectors: PWR1,

PWR2, PWR3 and PWR4

4. Fan connectors: Fan1, Fan2, and

Fan3

5. Primary SAS connector: PRI_J0

6. Primary SAS connector: PRI_J1

7. Primary SAS connector: PRI_J2

8. Secondary SAS connector: SEC_

J0 (not available on EL1 single

port backplane)

9. Secondary SAS connector: SEC_

J1 (not available on EL1 single

port backplane)

10. Secondary SAS connector: SEC_

J2 (not available oin EL1 single

port backplane)

11. Primary UART connector: UART_

P1 (no jumper required)

12. Secondary UART connector:

UART_S1 (no jumper required,

not present on SAS2-936EL1)

13. Primary MDIO connector: MDIO1

(Supermicro internal use only)

14. Secondary MDIO connector:

MDIO2 (Supermicro internal use

only, not present on SAS2-936-

EL1)

15. Primary debug connector: EXP-

DGB1 (Supermicro internal use

only)

16. Secondary debug connector:

EXPDGB1 (Supermicro internal

10 1

14 1

Figure 2-1: SAS2-936EL2 Connectors and Components

2-2

SAS2-936EL Series Backplane User's Guide

2-2 FrontConnectorandPinDenitions

1. EPP Ports

The EPP ports are used for manufacturer's

diagnostic purposes only.

Backplane

Main Power

4-Pin Connector

Pin#Denition

1 +12V

2 and 3 Ground

4 +5V

3. Backplane Main Power Connectors

The 4-pin connectors, designated PWR1,

PWR2, PWR3 AND PWR4, provide power to

the backplane. See the table on the right for

pindenitions.

4. Fan Connectors

The 4-pin connectors, designated Fan1, Fan2,

and Fan3, provide power to the fans. See the

tableontherightforpindenitions.

Fan Connectors

Pin#Denition

1 Ground

2 +12V

3 Tachometer

4 No connection

2. Primary and Secondary Expander Chips

This primary and secondary expander chips

allow the backplane to support dual port, cas-

cading,andfailovercongurations.

5. - 10. SAS Ports

Primary and secondary SAS ports.

11. - 12. UART Connectors

Primary and secondary UART connectors.

No jumper required. Secondary UART con-

nector is not present on the SAS2-936EL1

backplane.

13. - 14. MDIO Connectors

Primary and secondary MDIO connectors. For

Supermicro internal use only. Secondary MDIO

connector is not present on the SAS2-936EL1

backplane.

15. - 16. Debug Connectors

Primary and secondary debug connectors.

For Supermicro internal use only. Secondary

debug connector is not present on the SAS2-

936EL1 backplane.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Computerhardware Handbücher

Supermicro

Supermicro H13SST-G Bedienungsanleitung

Supermicro

Supermicro H13SSW Bedienungsanleitung

Supermicro

Supermicro M12SWA-TF Bedienungsanleitung

Supermicro

Supermicro AOC-CTGS-i2T Bedienungsanleitung

Supermicro

Supermicro AOC-A25G-i2SM Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 5038A-I Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-F424-A2N2A Bedienungsanleitung

Supermicro

Supermicro AOC-STG-i4T Bedienungsanleitung

Supermicro

Supermicro AOC-SLG3-4E4T Bedienungsanleitung

Supermicro

Supermicro 530AD-I Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-743A Bedienungsanleitung

Supermicro

Supermicro A2SAP-L1 Bedienungsanleitung

Supermicro

Supermicro B2SS2-F Bedienungsanleitung

Supermicro

Supermicro X12DPG-AR Bedienungsanleitung

Supermicro

Supermicro H13SAE-MF Bedienungsanleitung

Supermicro

Supermicro AOC-AG-i4S Bedienungsanleitung

Supermicro

Supermicro A3SSV-8C-SPLN10F Bedienungsanleitung

Supermicro

Supermicro AOC-SHG3-4M2P Bedienungsanleitung

Supermicro

Supermicro SBI-7426T-S3 Bedienungsanleitung

Supermicro

Supermicro AOC-CTG-b2T Bedienungsanleitung

Supermicro

Supermicro AOC-USAS-S4i Bedienungsanleitung

Supermicro

Supermicro AOC-ATG-b2TG Bedienungsanleitung

Supermicro

Supermicro X12SPA-TF Bedienungsanleitung

Supermicro

Supermicro AOC-B25G-6CVL Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung