Supermicro SC846 JBOD Series Bedienungsanleitung
SC846 Air Shroud
User’s Guide
Revison 1.0
SC846 Air Shroud User’s Guide
ii
The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. Please Note: For the most up-to-date version of this manual, please see
our web site at www.supermicro.com.
Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software, if any, and documentation
may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or
machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara
County in the State of California, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further
details.
Manual Revison 1.0
Release Date: April 21, 2009
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document.
Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2009 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS
PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER
REPRODUCTIVE HARM.
iii
Preface
About this Manual
This manual is written for professional system integrators, Information Technology
professionals, service personnel and technicians. It provides information for the
installation and use of Supermicro's SC846 air shroud. Installation and maintenance
should be performed by experienced professionals only.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the SC846
air shroud and describes its main features.
Chapter 2: System Safety
You should familiarize yourself with this chapter for a general overview of safety
precautions that should be followed when installing and servicing the SC846 air shroud.
Chapter 3: Configuration and Installation
Refer here for details on installing the SC846 air shroud on a computer system
mainboard.
SC846 Air Shroud User’s Guide
iv
Notes
v
:
Table of Contents
Chapter 1 Introduction.......................................................................1-1
1-1 Overview.............................................................................................1-1
1-2 Product Checklist of Typical Components.....................................1-1
1-3 Features..............................................................................................1-2
1-4 Returning Merchandise for Service................................................1-2
1-5 Contacting Supermicro.....................................................................1-3
Chapter 2 System Safety..................................................................2-1
2-1 Electrical Safety Precautions...........................................................2-1
2-2 General Safety Precautions.............................................................2-2
2-3 Electrostatic Discharge Precautions ..............................................2-2
2-4 Operating Precautions......................................................................2-2
Chapter 3 Configuration and Installation...............................3-1
3-1 Overview.............................................................................................3-1
3-2 SC846 Air Shroud Components .....................................................3-1
Component Part B ..................................................................................3-2
Component Part C..................................................................................3-3
3-3 Removing Breakable Sections for Cabling ...................................3-5
3-4 Configuring the SC846 Air Shroud.................................................3-6
Configuring for Configuration-1...............................................................3-7
Configuring for Configuration-2...............................................................3-8
Configuring for Configuration-3...............................................................3-9
3-5 Installing the SC846 Air Shroud....................................................3-10
SC846 Air Shroud User’s Guide
vi
Notes
1-1
Chapter 1
Introduction
1-1 Overview
The SC846 air shroud is a configurable air shroud for system mainboards to enable
maximum efficient air flow through the system. It can be configured to fit different sized
Intel®Xeon™DP 5500/5400/5100/5000 series system mainboards of the same general
shape and size. The SC846 air shroud is optimized for use with Supermicro SC846
series chassis designs and for Supermicro X8Dxx/X7Dxx series mainboards. See
Chapter 3 for configuration details.
1-2 Product Checklist of Typical Components
The SC846 air shroud comes packaged with components and parts as shown in
Table 1-1:
Table 1-1. SC846 Air Shroud Parts and Components
Part Number Description Quantity
MCP-310-48003-0N SC846 Intel DP plastic air shroud, supports up to 18 memory DIMM slots
MCP-310-48004-1N SC846 X8 air shroud component part A 1
MCP-310-48005-1N SC846 X8 air shroud component part B 1
MCP-310-28005-1N X8 air shroud universal component part C 1
MCP-310-28006-1N X8 air shroud universal component part D, tear-drop Mylar
module, 2.2” (55mm) wide 1
NOTE: The default configuration is for parts A, B, C and D connected.
NOTE: Each individual part for the SC846 air shroud is labeled with its
component part letter for easy identification.
SC846 Air Shroud User’s Guide
1-2
1-3 Features
The SC846 air shroud includes the following features:
• Main air shroud component
• Three detachable components for creating multiple configurations
• Breakable section for power cable management
• Clear plastic material construction for ease of viewing
1-4 Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your vendor for
a Returned Merchandise Authorization (RMA) number. When returning to the
manufacturer, the RMA number should be prominently displayed on the outside of the
shipping carton, and mailed prepaid or hand-carried. Shipping and handling charges will
be applied for all orders that must be mailed when service is complete.
For faster service, RMA authorizations may be requested online at:
http://www. supermicro.com/support/rma/
Whenever possible, repack the chassis in the original Supermicro carton, using the
original packaging material. If these are no longer available, be sure to pack the chassis
securely, using packaging material to surround the chassis so that it does not shift within
the carton and become damaged during shipping.
This warranty only covers normal consumer use and does not cover damages incurred
in shipping or from failure due to the alteration, misuse, abuse or improper maintenance
of products.
During the warranty period, contact your distributor first for any product problems.
1-3
Chapter 1: Introduction
1-5 Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: marketing@supermicro.com (General Information)
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
‘s-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email:
Asia-Pacific
Address: Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd.
Chung-Ho 235, Taipei County
Taiwan, R.O.C.
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3991
Web Site: www.supermicro.com.tw
Technical Support:
Email: support@supermicro.com.tw
Tel: +886-2-8228-1366, ext. 132 or 139
SC846 Air Shroud User’s Guide
1-4
Notes
Andere Handbücher für SC846 JBOD Series
1
Inhaltsverzeichnis
Andere Supermicro Computerhardware Handbücher
Supermicro
Supermicro SC825 Air Shroud Bedienungsanleitung
Supermicro
Supermicro AOC-S3816L-L16iR Bedienungsanleitung
Supermicro
Supermicro X12SPW-TF Bedienungsanleitung
Supermicro
Supermicro MBI-6219B-T41N MicroBlade Bedienungsanleitung
Supermicro
Supermicro SuperServer 5019S-L Bedienungsanleitung
Supermicro
Supermicro AOC-S25G6-M2S Bedienungsanleitung
Supermicro
Supermicro SuperBlade SBI-420P-4T2N Bedienungsanleitung
Supermicro
Supermicro AOC-SLG4-4E4T Bedienungsanleitung
Supermicro
Supermicro AOC-SHG3-4M2P Bedienungsanleitung
Supermicro
Supermicro SuperWorkstation SYS-551A-T Bedienungsanleitung
Supermicro
Supermicro Supero SAS-113TQ Bedienungsanleitung
Supermicro
Supermicro X13QEH+ Bedienungsanleitung
Supermicro
Supermicro BPN-SAS3-119A-N12 Bedienungsanleitung
Supermicro
Supermicro Super C9X299-PGF Bedienungsanleitung
Supermicro
Supermicro AOC-SLG2-2TM2 Bedienungsanleitung
Supermicro
Supermicro BPN-SAS3-LB16A-N10 Bedienungsanleitung
Supermicro
Supermicro AOC-STG-i4S Bedienungsanleitung
Supermicro
Supermicro AOC-A25G-i2SM Bedienungsanleitung
Supermicro
Supermicro BPN-SAS-825MTQ Backplane Bedienungsanleitung
Supermicro
Supermicro A3SSV-8C-SPLN10F Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
