Supermicro BPN-SAS-825MTQ Backplane Bedienungsanleitung

1.0

BPN-SAS-825MTQ Backplane

USER'S GUIDE

100

CG1

PRESSFIT

CG2CG3

CG1

PRESSFIT

CG2

CG3

CG1

PRESSFIT

CG2CG3

CG1

PRESSFIT

CG2

CG3

PRESSFIT

CG2

PRESSFIT

CG1

PRESSFIT

CG3

BAR CODE

DESIGNED IN USA

BPN-SAS3-826A-N4

REV:1.11

1 3

1 41 4

+ +

123

321

UB12

JP13

JP12

JP11

JP10

J27

JSM1

JSM2

JSM3

JSM4

JSM5

JSM6

JSM7

JP6

MH9

MH1MH2

MH3

MH4

MH7

MH8

JP8

JP9

JP1

JPW1

JPW2

JPW3

JPW4

C70

C125

C42

C41 C40C39

C36

C33

C34

C35

C100

C78

TP21 TP20

CPLD_RST

JTAG

BTTN1

BTTN2

BTTN3

BTTN4

CPU_SEL0

+5V

GND+12V

+5V

GND

+12V

+5VGND

+5V

GND+12V

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: March 27, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Contents

Contacting Supermicro.......................................................................................iv

Returning Merchandise for Service.....................................................................v

Chapter 1 Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 Revision Information ....................................................................................... 1-2

Chapter 2 Connectors and Jumpers

2-1 Front Connectors ............................................................................................ 2-1

2-2 FrontConnectorDenitions ............................................................................ 2-2

2-3 Front Jumper................................................................................................... 2-3

Explanation of Jumpers .................................................................................. 2-3

2-4 Rear Connectors and LED Indicators............................................................. 2-4

BPN-SAS-825MTQ Backplane Manual

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Web Site: www.supermicro.com.tw

Contents

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your vendor

for a Returned Merchandise Authorization (RMA) number. When returning to the

manufacturer, the RMA number should be prominently displayed on the outside of

the shipping carton, and mailed prepaid or hand-carried. Shipping and handling

charges will be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online (http://www.

supermicro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages

incurred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

Duringthewarrantyperiod,contactyourdistributorrstforanyproductproblems.

BPN-SAS-825MTQ Backplane Manual

Notes

1-1

Chapter 1 Safety Guidelines

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent

damage to your system, it is important to handle it very carefully. The following

measuresaregenerallysufcienttoprotectyourequipmentfromESD.

• Use a grounded wrist strap designed to prevent static discharge.

• Touch a grounded metal object before removing a component from the antistatic

bag.

• Handle the backplane by its edges only; do not touch its components, peripheral

chips, memory modules or gold contacts.

• When handling chips or modules, avoid touching their pins.

• Put the card and peripherals back into their antistatic bags when not in use.

1-2 General Safety Guidelines

• Always disconnect power cables before installing or removing any components

from the computer, including the backplane.

• Disconnect the power cable before installing or removing any cables from the

backplane.

• Make sure that the backplane is securely and properly installed on the

motherboard to prevent damage to the system due to power shortage.

BPN-SAS-825MTQ Backplane Manual

1-2

1-3 Revision Information

The BPN-SAS-825MTQ backplane has been designed to utilize the most up-to-date

technology available, providing your system with reliable, high-quality performance.

This manual reflects BPN-SAS-825MTQ Revision 1.02, the most current

release available at the time of publication. Refer to the Supermicro web site

at www.supermicro.com for the latest updates, compatible parts and supported

congurations.

All images and layouts in this user's guide are based upon the latest PCB revision

available at the time of publishing. The backplane you have received may not look

exactly the same as the graphics in this manual.

2-1

Chapter 2 Connectors, Jumpers and LEDs

1. JP10: Not used

2. JP11: Backplane Main Power

(4 Pin)

3. JP46: Firmware upgrade port

(6 pin)

4. JP51: Sideband Connector (8 pin)

5. J6: SAS Port #2

6. J7: SAS Port #1

7. J8: SAS Port #0

8. J9 and J10: DVD Drive Power

Connector (4-Pin)

Figure 2-1. Front View

Chapter 2

Connectors, Jumpers and LEDs

2-1 Front Connectors

65 43

1 2 3

14 1 4

DESIGNED IN USA

++++

22 12

REV 1.02

BPN-SAS-818TQ

JP46

J35

J29

J10

JP51

U18

U32

Q867

Q868

Q871

Q870

C119

C117

C115

C114 C118

C120

MH1

MH2

JP11

JP10

C121

U40

LED TEST

RESET

UPGRADE

#2 #1 #0

SIDEBAND

BPN-SAS-825MTQ Backplane Manual

2-2

#8. DVD Drive Power

Connectors

The 4-pin connectors, J9 and J10, provide

power to the DVD drives. See the table on

therightforpindenitions.

DVD Power

(J9 and J10)

Pin#Denition

1 +5V

2 and 3 Ground

4 +12V

#5-7. SAS Ports

The SAS ports are used to connect the SAS drive cables. The three ports are

designated#0,#1,and#2,andarecompatiblewithSATAdrives.Pinsaredened

according the SAS standard.

Backplane Power

Connector

(JP10, J11)

Pin#Denition

1+12V

2 and 3 Ground

4 +5V

2-2 Front Connector and Pin Denitions

#1. Not used in this model.

#2. Backplane Main Power

Connector

The 4-pin connector, JP11, provides power to

the backplane. See the table on the right for

pindenitions..

#4. Sideband Connector

The sideband connector is designated JP51.

For SES-2 to work properly, you must connect

an 8-pin sideband cable to JP51. See the table

totherightforpindenitions.

Sideband Connector

(JP51)

Pin#Denition Pin#Denition

2 Backplane

Addressing

(SB5)

1 Controller ID

(SB6)

4 Reset (SB4) 3 GND (SB2)

6 GND (SB3) 5 SDA (SB1)

8 Backplane ID

(SB7)

7 SCL (SB0)

10 No Connec-

tion

9 No Connec-

tion

#3. Firmware Upgrade Connector

JP46 is an MG9017A microcontroller firmware upgrade port, used only by

manufacturing.

Inhaltsverzeichnis

Andere Supermicro Computerhardware Handbücher

Supermicro

Supermicro AOC-SHG3-4M2P Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-833A Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-510T-M Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-510T-WTR Bedienungsanleitung

Supermicro

Supermicro AOC-SGP-i2 Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation SYS-551A-T Bedienungsanleitung

Supermicro

Supermicro X13SRN-H Bedienungsanleitung

Supermicro

Supermicro H13SSL-N Bedienungsanleitung

Supermicro

Supermicro SBI-7126T-S6 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBA-4114S-C2N Bedienungsanleitung

Supermicro

Supermicro SBI-7127RG Bedienungsanleitung

Supermicro

Supermicro SAS-836A Bedienungsanleitung

Supermicro

Supermicro MBB-CMM-6 Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-1129P-ACR10N4L Bedienungsanleitung

Supermicro

Supermicro AOM-S3108M-H8 Bedienungsanleitung

Supermicro

Supermicro X11DPFF-SN Bedienungsanleitung

Supermicro

Supermicro X12SPW-TF Bedienungsanleitung

Supermicro

Supermicro AOC-SLG3-4E4R Bedienungsanleitung

Supermicro

Supermicro H13SAE-MF Bedienungsanleitung

Supermicro

Supermicro AOC-2UR68G4-i4XTS Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-846EL Bedienungsanleitung

Supermicro

Supermicro AOC-SLG4-4X4T Bedienungsanleitung

Supermicro

Supermicro AOC-SMG3-2M2-B Bedienungsanleitung

Supermicro

Supermicro B13SEE-CPU-25G Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung