Supermicro SC835 Series Bedienungsanleitung

CSE-835TQ - R800B

CSE-835TQ - R920B

CSE-835TQC-R802B

CSE-835TQC-R1K03B

USER’S MANUAL

1.0d

SC835 Chassis

Series

SC835 Chassis Manual

Manual Revision 1.0d

Release Date: April 2, 2021

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC835 3U chassis. Installa-

tion and maintenance should be performed by experienced technicians only.

Supermicro’s SC835 3U chassis features a unique and highly-optimized design for

dual-core Xeon platforms. The chassis is equipped with a redundant 800W high-

e󰀩ciency power supply. High-performance fans provide ample optimized cooling for

FB-DIMM memory modules and 8 hot-swappable drive bays o󰀨er maximum storage

capacity in a 3U form factor.

This document lists compatible parts available when this document was published.

Always refer to the our Web site for updates on supported parts and congura-

tions.

SC835 Chassis Manual

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with this

chassis and contact information.

Chapter 2: Warning Statements for AC Systems

This chapter lists warnings, precautions, and system safety. You should thoroughly

familiarize yourself with this chapter for a general overview of safety precautions

that should be followed before installing and servicing this chassis.

Chapter 3: Chassis Components

Refer here for details on this chassis model including the fans, bays, airow shields,

and other components.

Chapter 4: System Interface

Chapter 4 provides details on the system interface, which includes the functions

and information provided by the control panel and other system LEDs.

Chapter 5: Chassis Setup and Maintenance

Refer to this chapter for detailed information on this chassis. Follow the procedures

in this chapter when installing, removing, or reconguring your chassis.

Chapter 6: Rack Installation

This chapter details information on chassis rack installation. .

Appendix A: SC835 Chassis Cables

Appendix B: Power Supply Specications

Appendix C: SAS-833TQ Backplane Specications

Appendix D: SAS-833A Backplane Specications

Preface

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping List.................................................................................................... 1-1

Part Numbers.................................................................................................. 1-1

1-3 Contacting Supermicro.................................................................................... 1-2

1-4 Returning Merchandise for Service................................................................. 1-3

Chapter 2 Standardized Warning Statements for AC Systems

2-1 About Standardized Warning Statements....................................................... 2-1

Warning Denition........................................................................................... 2-1

Installation Instructions.................................................................................... 2-4

Circuit Breaker ................................................................................................ 2-5

Power Disconnection Warning ........................................................................ 2-6

Equipment Installation..................................................................................... 2-8

Restricted Area................................................................................................ 2-9

Battery Handling............................................................................................ 2-10

Redundant Power Supplies .......................................................................... 2-12

Backplane Voltage ........................................................................................ 2-13

Comply with Local and National Electrical Codes........................................ 2-14

Product Disposal........................................................................................... 2-15

Hot Swap Fan Warning................................................................................. 2-16

Power Cable and AC Adapter ...................................................................... 2-18

Chapter 3 Chassis Components

3-1 Components.................................................................................................... 3-1

Drive Bays....................................................................................................... 3-1

Motherboard Support ...................................................................................... 3-1

Backplane........................................................................................................ 3-1

Power Supply.................................................................................................. 3-1

Fans ................................................................................................................ 3-2

Air Shroud ....................................................................................................... 3-2

I/O Expansion slots......................................................................................... 3-2

Switches and Status Indicators....................................................................... 3-2

Mounting Rails ................................................................................................ 3-2

3-2 Unpacking the System .................................................................................... 3-2

3-3 Where to get Replacement Components........................................................ 3-2

SC835 Chassis Manual

Chapter 4 System Interface

4-1 Overview ......................................................................................................... 4-1

4-2 Control Panel Buttons ..................................................................................... 4-2

4-3 Control Panel LEDs ........................................................................................ 4-3

4-4 Drive Carrier LEDs.......................................................................................... 4-4

Chapter 5 Chassis Setup and Maintenance

5-1 Overview ......................................................................................................... 5-1

5-2 Removing the Power Cord.............................................................................. 5-1

5-3 Removing the Chassis Cover ......................................................................... 5-2

5-4 Installing Drives............................................................................................... 5-3

Installing 3.5" Hard Drives .............................................................................. 5-3

Installing the Slim DVD Drive ......................................................................... 5-6

Using the 5.25" Full--Height Bays................................................................... 5-6

5-5 Installing the Motherboard .............................................................................. 5-7

Permanent and Optional Stando󰀨s................................................................. 5-7

Stando󰀨 Labeling ............................................................................................ 5-7

Motherboard Installation Procedure................................................................ 5-8

5-6 Installing Expansion Cards ............................................................................. 5-9

5-7 Installing Cooling Elements........................................................................... 5-10

System Fans ..................................................................................................5-11

Replacing a System Fan................................................................................5-11

Rear System Fans ........................................................................................ 5-12

Installing the Rear System Fans................................................................... 5-12

Checking the Server Air Flow ....................................................................... 5-13

5-8 Power Supply................................................................................................ 5-14

Replacing the Power Supply......................................................................... 5-14

Replacing the Power Distributor ................................................................... 5-15

Chapter 6 Rack Installation

6-1 Preparing for Setup......................................................................................... 6-1

Choosing a Setup Location............................................................................. 6-1

Ambient Operating Temperature ................................................................ 6-1

Adequate Airow ........................................................................................ 6-1

Circuit Overloading..................................................................................... 6-2

Reliable Ground ......................................................................................... 6-2

Physical Rack Precautions ............................................................................. 6-2

General Server Precautions............................................................................ 6-2

vii

Preface

6-2 Rack Mounting Instructions............................................................................. 6-4

Identifying the Sections of the Rack Rails...................................................... 6-4

Locking Tabs ................................................................................................... 6-5

Releasing the Inner Rail ................................................................................. 6-5

Installing The Inner Rails on the Chassis....................................................... 6-6

Installing the Outer Rails on the Rack............................................................ 6-7

Standard Chassis Installation ......................................................................... 6-8

Appendix A SC835 Chassis Cables

Appendix B Power Supply Specications

Appendix C SAS-833TQ Backplane Specications

C-1 ESD Safety Guidelines ...................................................................................C-1

C-2 General Safety Guidelines ..............................................................................C-1

C-3 An Important Note to Users ............................................................................C-2

C-4 Introduction to the SAS-833TQ Backplane.....................................................C-2

C-5 Front Connectors and Jumpers ......................................................................C-3

Front Components ..........................................................................................C-3

C-6 Front Connector and Pin Denitions...............................................................C-5

C-7 Front Jumper Locations and Pin Denitions...................................................C-7

Fan Jumper Settings.......................................................................................C-8

I2C and SGPIO Modes and Jumper Settings .................................................C-9

Front LED Indicators.....................................................................................C-10

C-8 Rear Connectors and LED Indicators...........................................................C-11

Appendix D SAS-833A Backplane Specications

D-1 ESD Safety Guidelines ...................................................................................D-1

D-2 General Safety Guidelines ..............................................................................D-1

D-3 An Important Note to Users ............................................................................D-2

D-4 Introduction to the SAS3-833A Backplane......................................................D-2

D-5 Front Connectors ............................................................................................C-3

D-6 Front Connector Pin Denitions......................................................................C-4

D-7 Front Connector and Pin Denitions...............................................................C-5

D-8 Front Jumper Locations and Pin Denitions...................................................C-7

D-9 Rear Connectors and LED Indicators.............................................................C-8

SC835 Chassis Manual

viii

Notes

1-1

Chapter 1: Introduction

Chapter 1

Introduction

1-1 Overview

Supermicro’s SC835 3U chassis features a unique and highly-optimized design.

The chassis is equipped with a redundant high-e󰀩ciency power supply. High-

performance fans provide ample optimized cooling and 8 hot-swappable drive bays

o󰀨er maximum storage capacity in a 3U form factor.

Note: A complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm.

1-2 Shipping List

Part Numbers

Please visit the following link for the latest shipping lists and part numbers for your

particular chassis model:

http://www.supermicro.com/products/chassis/3U/?chs=835

SC835 Chassis Series

Model HDD I/O Slots Power

Supply

CSE-C835TQ-R800B

8x 3.5" SAS / SATA

hot swappable drive

trays

7x FF 800W

Redundant

CSE-835TQ-R920B

8x 3.5" SAS / SATA

hot swappable drive

trays

7x FF 920W Redundant

(Platinum level)

CSE-835TQC-R802B

8x 3.5" SAS / SATA

hot swappable drive

trays

7x FF 800W Redundant

(Platinum level)

CSE-835TQC-R1K03B

8x 3.5" SAS / SATA

hot swappable drive

trays

7x FF 1000W Redundant

(Platinum level)

SC835 Chassis Manual

1-2

1-3 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Website: www.supermicro.com.tw

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-5039MC-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-FTN4 Bedienungsanleitung

Supermicro

Supermicro SuperServer E301-9D-8CN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110P-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer E302-9D Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-8CN8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 120C-TN10R Bedienungsanleitung

Supermicro

Supermicro X13SRA-TF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029U-T Series Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBA-4119S-C2N Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6013P-8 Plus Bedienungsanleitung

Supermicro

Supermicro X5DPR-iG2 Plus Bedienungsanleitung

Supermicro

Supermicro SuperStorage 5049P-E1CR45L Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022P-8 Bedienungsanleitung

Supermicro

Supermicro SuperStorage Server SSG-6049SP-E1CR60 Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-2021A-T2R+F Bedienungsanleitung

Supermicro

Supermicro BPN-NVMe3-216A-N4 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-8+ Bedienungsanleitung

Supermicro

Supermicro A+ AS-2124US-TNRP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-T Series Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-631E-E1CR16H Bedienungsanleitung

Supermicro

Supermicro 7045B-3 Bedienungsanleitung

Supermicro

Supermicro SuperServer 2026GT-TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1025W-U Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung