Supermicro SUPERSERVER 2048U-RTR4 Bedienungsanleitung

USER’S MANUAL

Revision 1.0b

SUPERSERVER®

2048U-RTR4

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0b

Release Date: June 29, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer. Installation and

maintainance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (www.supermicro.com).

Notes

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info:

http://www.supermicro.com/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SUPERSERVER 2048U-RTR4 Manual

Contents

Chapter 1 Introduction..............................................................................1-1

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

Rear I/O Ports................................................................................................. 1-2

Onboard Graphics........................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drives ..................................................................................................... 1-3

PCI Expansion Slots ....................................................................................... 1-3

Control Panel .................................................................................................. 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Unpacking the System .................................................................................... 2-1

2-2 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-3 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Releasing the Inner Rail ................................................................................. 2-5

Installing the Inner Rails on the Chassis ........................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Sliding the Chassis onto the Rack Rails......................................................... 2-8

Preface

Chapter 3 System Interface......................................................................3-1

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Power .............................................................................................................. 3-2

Reset............................................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

NIC1 ................................................................................................................ 3-3

Overheating..................................................................................................... 3-4

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-5

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

Warning Denition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning (if applicable to your system) ................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup ...............................................5-1

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports.......................................................................................................... 5-3

5-4 PCI Expansion Cards...................................................................................... 5-3

5-5 Replacing the Processors and Heatsinks....................................................... 5-4

Installing an LGA 2011 Processor................................................................... 5-4

Installing a Passive CPU Heatsink ................................................................. 5-7

Removing the Passive Heatsink ..................................................................... 5-7

SUPERSERVER 2048U-RTR4 Manual

5-6 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-8

5-7 Motherboard Details.......................................................................................5-11

X10QRH+ Quick Reference...........................................................................5-11

5-8 Connector Denitions.................................................................................... 5-13

Power Connectors......................................................................................... 5-13

Control Panel Connector............................................................................... 5-14

Other Connectors.......................................................................................... 5-16

5-9 Jumper Settings ............................................................................................ 5-20

5-10 Onboard Indicators........................................................................................ 5-22

5-11 SATA Ports .................................................................................................... 5-23

5-12 Installing Software......................................................................................... 5-24

SuperDoctor®5 ............................................................................................. 5-25

5-13 Onboard Battery............................................................................................ 5-26

Chapter 6 Advanced Chassis Setup........................................................6-1

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-3

6-4 Hard Drive Installation..................................................................................... 6-4

6-5 Adding PCI Expansion Cards ........................................................................ 6-8

6-6 Cooling Systems ........................................................................................... 6-12

Replacing a System Fan............................................................................... 6-12

Air Shroud ..................................................................................................... 6-13

6-7 Power Supply................................................................................................ 6-14

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-45

7-5 IPMI............................................................................................................... 7-47

7-6 Security Settings ........................................................................................... 7-49

7-7 Boot Settings................................................................................................. 7-53

7-8 Save & Exit ................................................................................................... 7-55

Appendix A BIOS Error Beep Codes ..................................................... A-1

Appendix B System Specications ........................................................ B-1

Notes

Chapter 1

Introduction

1-1 Overview

The SuperServer 2048U-RTR4 is a high-end server comprised of two main

subsystems: the SC218UTS-R1K02P 2U server chassis and the X10QRH+ quad

processor motherboard. Please refer to our website for information on operating

systems that have been certied for use with the system (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the system, as listed below:

• Ultra riser card (AOC-2UR66-I4G); for other options, refer to the Supermicro

web site.

• SAS/SATA Accessories

One SAS backplane (BPN-SAS3-216A-N4)

Twenty-four drive carriers (MCP-220-00047-0B)

• Cooling:

One air shroud (MCP-310-21804-0B)

Four system cooling fans (FAN-0118L4)

Four passive CPU heatsinks (SNK-P0047PS)

• Riser Cards: (see Section 5-6 for details)

One RSC-R2UW-4E8

One RSC-R1UW-E8R

Two RSC-S2-88

• One rack rail kit (MCP-290-00053-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info:

http://www.supermicro.com/about/policies/safety_information.cfm

For support, email [email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 2048U-RTR4 User's Manual

1-2 Motherboard Features

At the heart of the SuperServer 2048U-RTR4 lies the X10QRH+, a quad processor

motherboard based on the Intel E5-4600 v3/v4 Series Grantley platform and the

Intel PCH C612 chipset. Below are the main features of the motherboard. (See

Figure 1-1 for a block diagram of the chipset.)

Processors

The X10QRH+ supports up to four Intel Intel E5-4600 v3/v4 Series processors in

Socket R3 LGA2011 sockets. Please refer to our website for a complete listing of

supported processors (www.supermicro.com).

Memory

The X10QRH+ has 48 memory slots that can support up to 6 TB of 3DS LRDIMM

(3DS Load Reduced DIMMs), 3TB of LRDIMM (Load-Reduced DIMMs) or 1.5 TB

of RDIMM (Registered DIMMs) DDR4-2400/2133/1866/1600 memory. Please refer

to Chapter 5 for installing memory.

Serial ATA

A SATA controller is integrated into the chipset to provide a ten-port SATA 3.0

subsystem. The I-SATA 4 and I-SATA 5 ports have built-in power pins to support

SuperDOMs (Supermicro's SATA Disk on Module solution). RAID 0, 1, 5 and 10

are supported.

Rear I/O Ports

The rear I/O ports include one COM port, a VGA (monitor) port, two USB 3.0 ports

and one dedicated IPMI LAN port. A UID (Unit Identier) button is located between

the COM and VGA ports.

Onboard Graphics

The X10QRH+ features integrated VGA with the ASpeed 2400 BMC (Baseboard

Management Controller).

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 6029TP-HTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-WR Bedienungsanleitung

Supermicro

Supermicro A+ 1014S-WTRT Bedienungsanleitung

Supermicro

Supermicro 5038AD-I Bedienungsanleitung

Supermicro

Supermicro SuperServer 620C-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-HNR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-621P-TR Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-640SP-DE2CR60 Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DNCR Bedienungsanleitung

Supermicro

Supermicro A+ AS-5019D-FTN4 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-8+ Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015TW-INF Bedienungsanleitung

Supermicro

Supermicro SuperServer 2049U-TR4 Bedienungsanleitung

Supermicro

Supermicro SuperServer E50-9AP-N5 Bedienungsanleitung

Supermicro

Supermicro 5025M-4 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-FN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220HE-TNR Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2015HS-TNR Bedienungsanleitung

Supermicro

Supermicro 2042G-72RF4 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-HC0R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014P-32 Bedienungsanleitung

Supermicro

Supermicro AS-1024US-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-240P-TNRT Bedienungsanleitung

Supermicro

Supermicro SC835 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung