Supermicro SUPERSERVER 1028GQ-TXRT Bedienungsanleitung

USER’S MANUAL

Revision 1.0

SUPERSERVER®

1028GQ-TXR

1028GQ-TXRT

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: February 01, 2017 mk

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 1028GQ-TXR(T).

Installation and maintenance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (http://www.supermicro.

com).

Notes

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info:

http://www.supermicro.com/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SUPERSERVER 1028GQ-TXR(T) User's Manual

Contents

Chapter 1 Introduction

1-1 Overview ........................................................................................................ 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Onboard Serial ATA ........................................................................................ 1-2

Input/Output Ports........................................................................................... 1-2

Graphics Controller ......................................................................................... 1-2

1-3 GPUs and Add-on Module .............................................................................. 1-4

1-4 Chassis Features ........................................................................................... 1-5

System Power................................................................................................. 1-5

Hard Drives ..................................................................................................... 1-5

PCI Expansion Slots ....................................................................................... 1-5

Front Control Panel......................................................................................... 1-5

Cooling System............................................................................................... 1-5

1-5 Contacting Supermicro.................................................................................... 1-6

Chapter 2 Server Installation

2-1 Unpacking the System .................................................................................... 2-1

2-2 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-3 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Rack Mounting Instructions............................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Releasing the Inner Rail ................................................................................. 2-5

Installing The Inner Rails on the Chassis ...................................................... 2-6

Installing the Outer Rails on the Rack............................................................ 2-7

Installing into the Rack.................................................................................... 2-8

Removing the Chassis From the Rack........................................................... 2-9

Removing the Outer Rails From the Rack.................................................... 2-10

Preface

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Power .............................................................................................................. 3-2

Unit Identication............................................................................................. 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

NIC2 and NIC1................................................................................................ 3-2

Overheating..................................................................................................... 3-4

Overheat Temperature Setting ................................................................... 3-4

Responses.................................................................................................. 3-4

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-5

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Installing the Processor and Heatsink ............................................................ 5-2

Installing an LGA 2011 Processor................................................................... 5-2

Installing a CPU Heatsink ............................................................................... 5-5

Removing the Heatsink .................................................................................. 5-5

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables ................................................................................. 5-6

Connecting Power Cables .............................................................................. 5-6

Connecting the Control Panel......................................................................... 5-6

SUPERSERVER 1028GQ-TXR(T) User's Manual

5-4 Input/Output Ports........................................................................................... 5-7

LAN Ports........................................................................................................ 5-7

5-5 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-9

Processor and Memory Module Population Conguration ........................ 5-9

5-6 Motherboard Details.......................................................................................5-11

Motherboard Quick Reference...................................................................... 5-12

5-7 Connector Denitions.................................................................................... 5-13

Power Connectors ....................................................................................... 5-13

Control Panel Connector............................................................................... 5-13

Other Connectors.......................................................................................... 5-16

5-8 Jumper Settings ............................................................................................ 5-19

5-9 Onboard Indicators........................................................................................ 5-21

5-10 SATA Ports .................................................................................................... 5-22

5-11 GPU Mounting Board (AOM-SXM2) ............................................................. 5-23

5-12 Installing Software......................................................................................... 5-24

SuperDoctor®5 ............................................................................................. 5-25

5-13 Onboard Battery............................................................................................ 5-26

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-2

Precautions ..................................................................................................... 6-2

6-2 Removing Power............................................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-3

6-4 Control Panel .................................................................................................. 6-4

6-5 Hard Drive Installation..................................................................................... 6-4

Externally Accessable Drives.......................................................................... 6-5

Internal Drives................................................................................................. 6-7

6-6 Graphic Processor Units ................................................................................. 6-8

6-7 Adding Expansion Cards ............................................................................. 6-10

6-8 Cooling .......................................................................................................... 6-12

System Fans ................................................................................................. 6-12

Air Shroud and Block .................................................................................. 6-13

6-9 Power Supply................................................................................................ 6-14

Replacing a Power Supply Module............................................................... 6-14

vii

Preface

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-38

7-5 IPMI...............................................................................................................7-40

7-6 Security.........................................................................................................7-43

7-7 Boot............................................................................................................... 7-47

7-8 Save & Exit ................................................................................................... 7-49

Appendix A BIOS Error Beep Codes A-1

Appendix B System Specications B-1

viii

SUPERSERVER 1028GQ-TXR(T) User's Manual

Notes

Chapter 1

Introduction

1-1 Overview

The SuperServer 1028GQ-TXR(T) is a high-end graphics processing unit (GPU)

server comprised of two main subsystems: the SC118GQP 1U server chassis and

the X10DGQ dual processor motherboard. Refer to the Supermicro web site for

information on operating systems that have been certied for use with the system

(www.supermicro.com).

This server supports up to four Pascal SXM P100 GPUs with 20 GB/s GPU-to-

GPU per NVLINK and a total bandwidth of 80 GB/s. The GPUs are mounted on a

separate add-on module bridged to the motherboard, and can be cabled directly to

network output. The system supports GPUDirect RDMA.

Models

System LAN Ports I/O Add-on

Module

1028GQ-TXR Two 1Gbit AOM-PIO-I2G

1028GQ-TXRT Two 10Gbit AOM-PIO-I2XT-P

In addition to the above components, the 1028GQ-TXR(T) server includes:

• Pascal Add-on Module (AOM-SXM2-P), two bridgeboards (AOM-SXM-BRG)

• SAS3 backplane supporting two drives (BPN-SAS3-118GQE)

• Seven 4-cm system cooling fans (FAN-0163L4)

• Two passive CPU heatsinks (SNK-P0057P)

• Four passive GPU heatsinks (SNK-P4000V)

• Air shroud set (MCP-310-11805-0N)

• Riser cards for expansion cards (RSC-G-66 , RSC-G-68)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info:

http://www.supermicro.com/about/policies/safety_information.cfm

For support, email [email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 1028GQ-TXR(T) User's Manual

1-2 Motherboard Features

At the heart of the SuperServer 1028GQ-TXR(T) lies the X10DGQ, a dual processor

motherboard based on the Intel PCH C612 chipset. Below are the main features of

the motherboard. (See Figure 1-1 for a block diagram of the chipset.)

Processors

The motherboard supports single or dual Intel E5-2600 v3/v4 Series processors in

LGA2011 sockets (Socket R3). Refer to the Supermicro web site for a complete

listing of supported processors (www.supermicro.com).

Memory

The motherboard has 16 sockets that can support up to 512 GB of LRDIMM (Load-

Reduced DIMMs) or 1 TB of RDIMM (Registered DIMMs). Memory type is ECC

DDR4 SDRAM, 2400/2133/1866/1600 MHz.

Onboard Serial ATA

The motherboard has six SATA 3.0 connections from Intel PCH (SATA1-6) with two

SATA ports used for SuperDOMs (Device-on-Module) with power supply built in.

RAID 0, 1, 5 and 10 are supported by Intel PCH.

Input/Output Ports

The rear I/O ports include two USB 3.0 ports, a dedicated IPMI LAN port, and two

LAN ports. The 1028GQ-TXR model offers two Gigabit LAN ports; the 1028GQ-TXRT

model features two 10-Gigabit LAN ports. A VGA port is also available on the chassis

rear. These are all presented on the chassis rear by means of an add-on module.

Also available on the motherboard are one COM header and a header for two

USB 2.0 ports.

Graphics Controller

The motherboard features an integrated ASpeed AST2400 BMC graphics chip.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 120C-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6028U-E1CNR4T+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 420GP-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029TP-HC0R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E200-12D-10C Bedienungsanleitung

Supermicro

Supermicro 5015M-Ni Montage- und Bedienungsanleitung

Supermicro

Supermicro SuperStorageServer 1029P-NES32R Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9C Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-WC1R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221P-C9R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H12TRF Bedienungsanleitung

Supermicro

Supermicro SC835 Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 8049U-E1CR4T Bedienungsanleitung

Supermicro

Supermicro 1028-WTNR(T) Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6010H Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019P-MT Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2025HS-TNR Bedienungsanleitung

Supermicro

Supermicro superserver 2028TP-VRL Serie Bedienungsanleitung

Supermicro

Supermicro SuperServer 2016Ti-HTRF Bedienungsanleitung

Supermicro

Supermicro AS -1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-2021A-T2R+F Bedienungsanleitung

Supermicro

Supermicro 8028B-TR4F Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018R-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210TP-HPTR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung