Supermicro SUPERSERVER 5018A-LTN4 Bedienungsanleitung

SUPERSERVER

5018A-LTN4

User's Manual

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: August 31, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5018A-LTN4.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5018A-LTN4 is a compact server based on the SC504-203B

rackmountable chassis and the A1SAi-2750F single processor motherboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the A1SRi-2358F motherboard

and the SC504-203B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5018A-LTN4

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: Standardized Warning Statements

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardzed Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5018A-LTN4.

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the A1SRi-2358F motherboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the motherboard.

SUPERSERVER 5018A-LTN4 User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC504-203B server chassis.

You should follow the procedures given in this chapter when installing, removing

or reconﬁguring SAS/SATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Motherboard Features.....................................................................................1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

Serial ATA........................................................................................................1-2

I/O Ports..........................................................................................................1-2

Expansion Slot................................................................................................ 1-2

LAN Ports........................................................................................................ 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drive Subsystem....................................................................................1-3

Front Control Panel......................................................................................... 1-3

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Installing the Chassis into a Standard Rack...................................................2-4

Telco Rack.......................................................................................................2-5

Installing the Chassis into a Telco Rack......................................................... 2-6

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

SUPERSERVER 5018A-LTN4 User's Manual

vii

3-3 Control Panel LEDs ........................................................................................3-2

Power Fail.......................................................................................................3-2

Information LED.............................................................................................. 3-2

NIC1................................................................................................................ 3-2

NIC2................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power..............................................................................................................3-3

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition...........................................................................................4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables.................................................................................5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel.........................................................................5-2

5-3 I/O Ports..........................................................................................................5-3

5-4 Memory Support..............................................................................................5-4

Memory Population Guidelines....................................................................... 5-4

Installing SODIMM Memory Modules .............................................................5-5

5-5 Expansion Cards............................................................................................. 5-5

5-6 Motherboard Details........................................................................................ 5-6

A1SRi-2358F Motherboard Quick Reference................................................. 5-7

5-7 Connector Deﬁnitions .....................................................................................5-9

Table of Contents

viii

SUPERSERVER 5018A-LTN4 User's Manual

Control Panel Connectors.............................................................................5-10

Input/Output Connectors...............................................................................5-12

Other Connectors.......................................................................................... 5-13

5-8 Jumper Settings............................................................................................ 5-16

5-9 Onboard Indicators........................................................................................5-18

5-10 SATA Ports....................................................................................................5-19

5-11 Installing Software......................................................................................... 5-20

SuperDoctor®5 .............................................................................................5-21

5-12 Serverboard Battery...................................................................................... 5-22

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-3

6-4 System Fans................................................................................................... 6-4

6-5 Installing Hard Drives...................................................................................... 6-4

Hard Drive Conﬁguration Options................................................................... 6-6

6-6 Installing an Expansion Card..........................................................................6-7

6-7 Power Supply.................................................................................................. 6-9

Replacing the Power Supply........................................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Event Logs....................................................................................................7-27

7-5 IPMI............................................................................................................... 7-29

7-6 Security Settings........................................................................................... 7-31

7-7 Boot Settings................................................................................................. 7-34

7-8 Save & Exit ...................................................................................................7-35

Appendix A BIOS POST Error Codes

Appendix B System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 5018A-LTN4 is a compact server comprised of two main

subsystems: the SC504-203B 1U chassis and the A1SRi-2358F single processor

motherboard. Please refer to our web site for information on operating systems that

have been certiﬁed for use with the system (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the 5018A-LTN4, as listed below:

• One riser card bracket for slot 7 (MCP-120-00063-0N)

• One 4-cm PWM fan (FAN-0100L4)

• One riser card (RSC-RR1U-E8)

• Optional: one tray for 4-cm fan (MCP-320-81302-0B)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information:

http://www.supermicro.com/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

SUPERSERVER 5018A-LTN4 User's Manual

1-2

1-2 Motherboard Features

At the heart of the SuperServer 5018A-LTN4 lies the A1SRi-2358F a single

processor motherboard based on the Intel Atom System on a Chip (see Figure 1-1

for a block diagram).

Processors

The motherboard supports a single Intel Atom C2758 Tri-Gate, SoC FCBGA 1283

socket, 20W 8-Core processor.

Memory

The motherboard can support up to 64 GB of unbuffered ECC UDIMM DDR3

SDRAM memory at 1600/1333 MHz speeds, in eight (8) slots, and in either

2, 4, 8, or 16 GB size SODIMMs.

Serial ATA

The motherboard offers two SATA3 (6Gbps) ports and four SATA2 (3Gbps) ports.

I/O Ports

The motherboard includes four LAN ports, an IPMI port, two USB 3.0 rear ports,

two USB 2.0 rear ports, two USB 3.0 (one Type A, one header), one SATA DOM

power connector, one rear COM port, one front accessible COM port header, and

one VGA port.

Expansion Slot

The server supports one low proﬁle PCI Express 2.0 x8 card.

LAN Ports

The system features four GbE LAN ports and one IPMI LAN connector.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 5029C-T Bedienungsanleitung

Supermicro

Supermicro AS-2020A-8R Bedienungsanleitung

Supermicro

Supermicro SuperServer 530MT-H12TRF Bedienungsanleitung

Supermicro

Supermicro 5018D2-AR12L Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110P-FDWTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-i2 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210GP-DNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014V-M4 Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6049SP-DE1CR60 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-TN10RT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022P-8 Bedienungsanleitung

Supermicro

Supermicro A+ Series Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-511E-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer 220BT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 7088B-TR4FT Bedienungsanleitung

Supermicro

Supermicro SuperServer E102-9W-H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6016T-URF4+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5038MD-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-8CN8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5015P-8R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1015B-M3 Bedienungsanleitung

Supermicro

Supermicro SuperServer 620BT-DNTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018A-MHN4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung