Supermicro SuperServer 1028GR-TR Bedienungsanleitung

USER’S MANUAL

Revision 1.0b

SUPERSERVER®

1028GR-TR

1028GR-TRT

2 1

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

Manual Revision 1.0b

Release Date: April 27, 2018

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 1028GR-TR(T).

Installation and maintenance should be performed by experienced technicians only.

             

supported memory, processors and operating systems (http://www.supermicro.

com).

Notes

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://super-dev/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SuperServer 1028GR-TR(T) User Manual

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots ....................................................................................... 1-2

Input/Output Ports........................................................................................... 1-2

IPMI................................................................................................................. 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

SATA Subsystem ............................................................................................ 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 GPU Subsystem.............................................................................................. 1-3

1-5 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

 ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Optional Inner Rail Extensions.................................................. 2-5

Assembling the Outer Rails ............................................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Installing and Removing the Chassis From a Rack ....................................... 2-8

Installing the Server into a Telco Rack ........................................................... 2-9

Contents

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheating..................................................................................................... 3-3

Overheat Temperature Setting ................................................................... 3-3

Responses.................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

 ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning (if applicable to your system) ................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports.......................................................................................................... 5-3

5-4 Installing the Processor and Heatsink ............................................................ 5-4

Installing an LGA 2011 Processor................................................................... 5-4

Installing a CPU Heatsink ............................................................................... 5-7

Removing the Heatsink .................................................................................. 5-7

SuperServer 1028GR-TR(T) User Manual

5-5 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-8

 .............................................. 5-8

5-6 Serverboard Details ...................................................................................... 5-10

 ................................................................................... 5-13

I/O Connections ............................................................................................ 5-17

5-8 Jumper Settings ............................................................................................ 5-20

5-9 Onboard Indicators........................................................................................ 5-22

5-10 SATA Ports .................................................................................................... 5-23

5-11 Installing Software......................................................................................... 5-24

SuperDoctor®5 ............................................................................................. 5-25

5-12 Onboard Battery............................................................................................ 5-26

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-2

Precautions ..................................................................................................... 6-2

6-2 Control Panel .................................................................................................. 6-2

6-3 Installing Drives............................................................................................... 6-3

6-4 Installing Graphics (GPU) Cards..................................................................... 6-5

6-5 Installing Expansion Cards ............................................................................ 6-7

6-6 System Cooling............................................................................................... 6-8

System Fan Failure......................................................................................... 6-8

Installing the Air Shroud................................................................................ 6-10

6-7 Power Supply.................................................................................................6-11

Chapter 7 AMI BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

 ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

 ...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-30

7-5 IPMI............................................................................................................... 7-32

7-6 Security Settings ........................................................................................... 7-34

7-7 Boot Settings................................................................................................. 7-35

7-8 Save & Exit ................................................................................................... 7-38

Appendix A BIOS Error Beep Codes

Appendix B System Specications

Chapter 1

Introduction

1-1 Overview

The SuperServer 1028GR-TR(T) series is a high-end GPU server comprised of two

main subsystems: an SC118GH-R1K66B 1U server chassis and the X10DRG-H/HT

dual processor serverboard. The 1028GR-TR offers 1Gb LAN connections and

the 1028GR-TRT offers 10Gb. Refer to our web site for information on operating

 www.supermicro.com).

Additional components are:

• Ten 4-cm counter-rotating fans (FAN-0141L4)

• One air shroud (MCP-310-11803-0N)

• Two passive CPU heatsinks (SNK-P0047PS:CPU1 and SNK-

P0047PSC:CPU2)

• Riser Cards

• One RSC-R1UG-A2E16-X9

• One RSC-R1UG-E16R-X9

• One RSC-R1UG-E16AR+II

• One RSC-R1UG-E16R+II

• Three power cables for GPU cards (CBL-PWEX-0582)

• SATA Accessories

One SAS backplane (BPN-SAS-118G-4)

Four hot-swap drive carriers (MCP-220-00047-0B)

Four SATA cables (CBL-0484L)

One SGPIO cable (CBL-0157L-02)

One backplane power ext. (CBL-0460L)

Five fan extension cables (CBL-0296L)

• One rail set (MCP-290-00054-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information:

http://www.supermicro.com/about/policies/safety_information.cfm

For support, email [email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 1028GR-TR/TRT User's Manual

1-2 Serverboard Features

At the heart of the server is the X10DRG-H/HT, a dual processor serverboard based

on the Intel PCH C612 chipset. Below are the main features. (See Figure 1-1 for

a block diagram)

Processors

The X10DRG-H/HT supports two Intel E5-2600 v3/v4 series processors in LGA

2011 sockets (Socket R3). Refer to the serverboard description pages on our web

site for a complete listing of supported processors (www.supermicro.com).

Memory

The serverboard has 16 DIMM slots that can support up to 2TB of registered Load

Reduced (LRDIMM), or 1 TB of RDIMM, DDR4 ECC 2400/2133/1866/1600 MHz

DIMMs. See Chapter 5 for details.

Serial ATA

The serverboard supports a 10-port SATA 3.0 subsystem. RAID 0, 1, 5 and 10 can

be enabled. The SATA drives are hot-swappable.

PCI Expansion Slots

The serverboard has four PCI-Express 3.0 x16 slots to support three double-width



slot) card. Note that both CPUs must be installed for full use of the PCIe slots.

Input/Output Ports

The rear I/O ports include a VGA (monitor) port, two USB 3.0 ports, two Ethernet

LAN ports (1Gb for X10DRG-H, 10Gb for X10DRG-HT) and one dedicated IPMI

LAN port.

IPMI

IPMI (Intelligent Platform Management Interface) is a hardware-level interface

        

Supermicro server platforms. IPMI allows server administrators to view a server’s

hardware status remotely, receive an alarm automatically if a failure occurs, and

power cycle a system that is non-responsive.

1-3

Chapter 1: Introduction

1-3 Server Chassis Features

System Power



One power module may be removed without shutting down the system. See Chapter

6 for details.

SATA Subsystem

The chassis includes four 2.5" drive bays, which may be used to house hot-

swappable SATA drives. RAID 0, 1, 5 and 10 are supported (RAID 5 is not

supported with Linux OS).

Front Control Panel

The control panel provides a system monitoring and control interface. LEDs indicate

system power, HDD activity, network activity, system overheat, UID and power

supply failure. A main power button and a system reset button are also included.

Cooling System

The system has an innovative cooling design that includes ten 4-cm counter-rotating

PWM (Pulse Width Modulated) fans. The power supply module also includes a

cooling fan. All chassis and power supply fans operate continuously.

1-4 GPU Subsystem

The 1028GR-TR(T) server represents one of Supermicro's massively parallel

processing multiple-GPU/Xeon Phi servers, with support for up to three GPU/Xeon

Phi cards. It supports all NVIDIA K10, K20, K40, K80 GPUs and Intel Xeon Phi

cards, placing this system at the forefront of today's GPU computing solutions.

Refer to the NVIDIA web site (www.nvidia.com) for details on GPUs.

1-4

SUPERSERVER 1028GR-TR/TRT User's Manual

SPI

LAN3

RGRMII

Debug Card

FRONT PANEL

SYSTEM POWER

CTRL

FAN SPEED

PCI-E X1 G2

USB 2.0

#12 USB2.0

#6/7/8

PCH

6.0 Gb/S

LPC

SATA

RTL8211E-VB-CG

RJ45

BIOS

SPI

Temp Sensor

EMC1402-1 *2 at diff SMBUS

TPM HEADER

USB 3.0

BIOS

HEADER

SPI

AST2400

BMC

RMII/NCSI

COM

Header

VGA CONN

BMC Boot Flash

DDR3

SLOT 1

5 PHASE

145W

VR12.5

QPI

9.6G

SLOT 3

PCI-E X16 G3

DMI2

PCI-E X16

PCI-E X16 G3 (LAN REVERSE)

DDR4

DMI2

QPI

9.6G

4GB/s

5 PHASE

145W

VR12.5

PCI-E X16

I350/X540

LAN

PCI-E X8

SLOT 4

PCI-E X16

SLOT2

PCI-E X8

PCI-EX8 G3(w/ Re-driver)

PCI-EX16 G3(LAN REVERSE)

PCI-EX16 G3

#1 #2 #3

#2 #1

<=1.758W (average)

2.3W (Peak)

MAX:12.5W

STBY:2.5W

TDP:6.5W (WORKSTATION)

5W (SERVER)

USB & SATA useage different

Idle:0.45W

5V:1.2A

3.3V:0.1A

3.3 STBY:0.2A

1.05 PCH

1.05 ASW

1.5 PCH

PVCCIO 1.0/0.95

3.3STBY:0.5A

VCCP1 12v

VCCP0 12v

PVCCIO

(1.05/0.95)

from 3.3v

P5V_AUX

PX2V5_I3V3

PX1V2_I1V8

PX0V8_I1V0

PX0V67_I1V0

P3V3_STBY

P1V5_AUX_BMC

P1V2_AUX_BMC

P3V3_PCH

P1V5_PCH 3.3v

P1V05_PCH 5v

P1V05_STBY 3.3v STBY

Sagevill: 9W

Processor 1 Processor 2

SLOT5

DMI2

DDR4

up to 2133

DDR4

#1-4

#1-3

#1-2

#1-1

#1-5

#1-6

#1-7

#1-8

#2-1

#2-2

#2-3

#2-4

#2-5

#2-6

#2-7

#2-8

up to 2133

DDR4

SATA

USBSATA

Figure 1-1. Intel PCH C612 Chipset System Block Diagram

Note: This is a general block diagram. See Chapter 5 for details.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperBlade SBI-611E-1C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029UZ-TN20R25M Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015V-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-4C-FN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110P-WR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014A-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-12T Bedienungsanleitung

Supermicro

Supermicro 2029P-TXRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019D-FRN8TP Bedienungsanleitung

Supermicro

Supermicro A+ SERVER 1022G-URF Bedienungsanleitung

Supermicro

Supermicro SuperServer E102-9W-C Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1115CS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9D-16C-IP Bedienungsanleitung

Supermicro

Supermicro SUPERO SuperServer 1018L-MP Bedienungsanleitung

Supermicro

Supermicro FatTwin AS -F1114S-FT Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640SP-DE1CR60 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-510T-WTR-EU Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620TP-HTTR Bedienungsanleitung

Supermicro

Supermicro ASG-1014S-ACR12N4H Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-8C Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014L-T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015C-NT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521R-T Bedienungsanleitung

Supermicro

Supermicro A+ AS-1114S-WN10RT Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung