Supermicro SUPERSERVER 1028UX-TR4 Bedienungsanleitung

User's Manual

Revision 1.0a

SUPERSERVER®

1028UX-TR4

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0a

Release Date: July 21, 2017

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 1028UX-TR4.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 1028UX-TR4 is a high-end server based on the SC119UAC2-R750

1U rackmount chassis and the dual processor X10DRU-X serverboard.

Manual Organization

Chapter 1: Introduction

            

server system and describes the main features of the X10DRU-X serverboard and

the SC119UAC2-R750 chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 1028UX-TR4



If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Safety Warnings

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 1028UX-TR4.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRU-X serverboard, including

the locations and functions of connections, headers and jumpers. Refer to

this chapter when adding or removing processors or main memory and when



SUPERSERVER 1028UX-TR4 User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC119UAC2-R750 server chassis.

You should follow the procedures given in this chapter when installing, removing



cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

SUPERSERVER 1028UX-TR4 User's Manual

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ..................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Onboard Serial ATA......................................................................................... 1-2

Input/Output..................................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drives ..................................................................................................... 1-3

PCI Expansion Slots ....................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions .............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

 ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Optional Inner Rail Extensions.................................................. 2-5

Assembling the Outer Rails ............................................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Installing and Removing the Chassis From a Rack ....................................... 2-8

Installing the Server into a Telco Rack ........................................................... 2-9

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

SUPERSERVER 1028UX-TR4 User's Manual

vii

3-2 Control Panel Buttons ..................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheating..................................................................................................... 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning (if applicable to your system) ................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Processor and Heatsink Installation................................................................ 5-2

Installing a Passive CPU Heatsink ................................................................. 5-5

Removing the Heatsink................................................................................... 5-5

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables ................................................................................. 5-6

Connecting Power Cables .............................................................................. 5-6

5-4 I/O Ports.......................................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-9

5-6 Serverboard Details ...................................................................................... 5-10

X10DRU-X Quick Reference......................................................................... 5-10

 .................................................................................... 5-12

5-8 Jumper Settings ............................................................................................ 5-17

5-9 Onboard Indicators........................................................................................ 5-19

5-10 SATA Ports .................................................................................................... 5-20

5-11 Installing Software......................................................................................... 5-21

Table of Contents

viii

SuperDoctor® 5 ............................................................................................ 5-22

5-12 Onboard Battery............................................................................................ 5-23

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Removing Power from the System ................................................................. 6-2

6-3 Control Panel .................................................................................................. 6-2

6-4 Chassis Cover................................................................................................. 6-3

6-5 Installing Drives............................................................................................... 6-4

6-6 Installing Expansion Cards ............................................................................ 6-5

Internal Expansion Card ................................................................................. 6-7

6-7 System Cooling............................................................................................... 6-8

System Fan Replacement............................................................................... 6-8

Installing the Air Shroud................................................................................ 6-10

6-8 Power Supply.................................................................................................6-11

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

 ......................................................... 7-2

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

 ...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-32

7-5 IPMI............................................................................................................... 7-34

7-6 Security Settings ........................................................................................... 7-36

7-7 Boot Settings................................................................................................. 7-37

7-8 Save & Exit ................................................................................................... 7-39

Appendix A BIOS Error Beep Codes

Appendix B System Specications

SUPERSERVER 1028UX-TR4 User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 1028UX-TR4 is a high-end server comprised of two main

subsystems: the SC119UAC2-R750 1U server chassis and the X10DRU-X dual

processor serverboard. Please refer to our website for information on operating



In addition to the serverboard and chassis, various hardware components have

been included:

• Four sets of 4-cm counter-rotating fans (FAN-0101L4)

• Two passive CPU heatsinks (SNK-P0057PU)

• Riser Cards

One RSC-R1UW-2E16

One RSC-R1UW-E8R

One Ultra riser for one each full-height, full-length PCI-E x8 and x16 cards

(AOC-2UR68-I4G)

• SAS Accessories

One SAS backplane (BPN-SAS3-116A)

Ten drive carriers (MCP-220-00047-0B)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://www.supermicro.com/about/policies/safety_

information.cfm

For support, email [email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 1028UX-TR4 User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 1028UX-TR4 lies the X10DRU-X, a dual processor

serverboard based on the PCH C612. Below are the main features of the

serverboard. (See Figure 1-1 for a block diagram).

Processors

The server supports single or dual Intel E5-2600v3 Series processors in R3 LGA

2011 sockets. Please refer to our website for a complete listing of supported

processors (www.supermicro.com).

Memory

The server features 16 DIMM slots that can support up to 1 TB of

DDR4-2133/1866/1600 MHz ECC LRDIMM type memory. Please refer to Chapter

5 for installing memory.

Onboard Serial ATA

Ten SATA 3.0 connections supported by Intel PCH are included on the serverboard.

RAID 0, 1, 5 and 10 is supported. Refer to the following ftp site for setup

guidelines:

<ftp://ftp.supermicro.com/driver/SAS/LSI/LSI_SAS_EmbMRAID_SWUG.pdf>.

Note: You must have RAID set up to enable the hot-swap capability of the SATA

drives.

Input/Output

The rear I/O includes a VGA port, a COM port, two USB 3.0 ports, quad Gb LAN

ports and one dedicated IPMI LAN port.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro 1027R-73DAF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210TP-HPTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-120TP-DTTR Bedienungsanleitung

Supermicro

Supermicro AS -1024US-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer E200-9A Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-HTR Bedienungsanleitung

Supermicro

Supermicro AS-1024US-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015V-MR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018U-TR4+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029P-C1R Bedienungsanleitung

Supermicro

Supermicro SuperServer 1028GR-TR Bedienungsanleitung

Supermicro

Supermicro SUPER SUPERSERVER 6027PR-HTR Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R24L Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019P-MT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-TN4 Bedienungsanleitung

Supermicro

Supermicro A+ Bedienungsanleitung

Supermicro

Supermicro SuperStorage L-Serie Bedienungsanleitung

Supermicro

Supermicro SUPERO SuperServer 1018L-MP Bedienungsanleitung

Supermicro

Supermicro SuperServer 6023P-i Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-DNCR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2049U-TR4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620TP-HC8TR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung