Supermicro 1028-WTNR(T) Bedienungsanleitung

SUPER ®

USER’S MANUAL

Revision 1.0

SUPERSERVER®

1028R-WTNR(T)

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: January 08, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer. Installation and

maintainance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (http://www.supermicro.

com).

Notes

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://super-dev/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SUPERSERVER 1028R-WTNR(T) Manual

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-2

Input/Output Ports .......................................................................................... 1-2

IPMI................................................................................................................. 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power................................................................................................. 1-4

Hard Drives Bays............................................................................................ 1-4

Front Control Panel......................................................................................... 1-4

Cooling System............................................................................................... 1-4

Chapter 2 Installation in a Rack

2-1 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-2 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-3 Installing the System into a Rack .................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Inner Rail Extension (optional)........................................................................ 2-5

Assembling the Outer Rails ............................................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Sliding the Chassis onto the Rack Rails......................................................... 2-8

Installing the Server into a Two Post Rack..................................................... 2-9

Chapter 3 System Interface

3-1 Overview ........................................................................................................ 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Preface

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheating..................................................................................................... 3-3

Overheat Temperature Setting ................................................................... 3-3

Responses.................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

Warning Denition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning (if applicable to your system) ................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports.......................................................................................................... 5-3

5-4 Installing the Processor and Heatsink ............................................................ 5-4

Installing an LGA 2011 Processor................................................................... 5-4

Installing a CPU Heatsink ............................................................................... 5-7

Removing the Heatsink .................................................................................. 5-7

5-5 Installing Memory............................................................................................ 5-8

DIMM Installation ............................................................................................ 5-8

Removing Memory Modules ........................................................................... 5-8

Memory Support.............................................................................................. 5-9

5-6 Expansion Cards........................................................................................... 5-10

SUPERSERVER 1028R-WTNR(T) Manual

5-7 Serverboard Details .......................................................................................5-11

5-8 Connector Denitions ................................................................................... 5-14

Power Connectors......................................................................................... 5-14

5-9 Jumper Settings ............................................................................................ 5-20

5-10 Onboard Indicators........................................................................................ 5-22

5-11 Storage Devices ........................................................................................... 5-23

5-12 Installing Software......................................................................................... 5-24

SuperDoctor®5 ............................................................................................. 5-25

5-13 Serverboard Battery...................................................................................... 5-26

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Removing Power from the System ................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-3

6-4 Control Panel .................................................................................................. 6-3

6-5 Installing Hard Disk Drives.............................................................................. 6-4

6-6 System Fans ................................................................................................... 6-7

6-7 Installing Expansion Cards ............................................................................. 6-9

6-8 Power Supply.................................................................................................6-11

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

How to Start the Setup Utility ......................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-32

7-5 IPMI............................................................................................................... 7-34

7-6 Security Settings ........................................................................................... 7-36

7-7 Boot Settings................................................................................................. 7-37

7-8 Save & Exit ................................................................................................... 7-39

Appendix A BIOS POST Error Codes .................................................... A-1

Appendix B System Specications ........................................................ B-1

Preface

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Web Site: www.supermicro.com.tw

SUPERSERVER 1028R-WTNR(T) Manual

Notes

Chapter 1

Introduction

1-1 Overview

The SuperServer 1028R-WTNR(T) is a 1U server comprised of two main

subsystems: the SC116AC2-R706WB 1U server chassis and the X10DRW-N(T)

serverboard. The 1028R-WTNRT model, with the X10DRW-NT serverboard, offers

10 Gb Ethernet capabilities. Refer to our web site to learn which operating systems

have been certied for use with this system (www.supermicro.com).

In addition to the chassis and serverboard, the following parts are included:

•Four 4-cm counter-rotating fans (FAN-0101L4)

•Two passive CPU heatsinks (SNK-P0047PSC and SNK-P0057PS)

•Riser Card (RSC-R1UW-2E16-O-P)

•Backplane (BPN-SAS3-116A-N2)

•Mounting rail set (MCP-290-00063-0N)

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://super-dev/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 1028R-WTNR(T) User's Manual

1-2 Serverboard Features

At the heart of the 1028R-WTNR(T) SuperServer is the X10DRW-N(T), a dual

processor serverboard based on the Intel C612 Express chipset. Below are the main

features of the system (See Figure 1-1 for a chipset block diagram).

Processors

The serverboard supports dual Intel Xeon E5-2600 (V3) processors (

LGA 2011 Socket v3). Each processor supports dual full-width Intel QuickPath

Interconnect (QPI) links of up to 9.6 GT/s one direction per QPI. Refer to the

serverboard description pages on the Supermicro web site for a complete listing

of supported processors.

Memory

The integrated memory controller supports up to 1024 GB of Load Reduced

(LRDIMM), and up to 512 GB of Registered (RDIMM) DDR4 (288-pin) ECC

2133/1866/1600 MHz memory in sixteen slots, two DIMMs per channel. Modules

of the same size and speed are recommended. See Chapter 5 for details.

Serial ATA

The server supports ten hot-swap hard drives, with eight SATA 3.0 connectors

plus two NVMe/SATA 3.0 hybrid ports, connected to an onboard storage controller

(I-SATA 0-3, S-SATA0-3, I-SATA4/5 for SATADOM).

PCI Expansion Slots

The serverboard has one PCI-Express 3.0 x32 slot. The system supports two

expansion cards by means of a riser card.

Input/Output Ports

The rear I/O ports include two Ethernet LAN ports, one dedicated IPMI LAN port,

four USB 2.0 ports, and a VGA (monitor) port. The LAN ports are:

•For 1028R-WNTR model, two 1 Gb ports

•For 1028R-WNTRT model, two 10 Gb ports

Internal headers include two USB 3.0 ports and one COM port.

The rear I/O panel also includes a UID switch and LED.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 6013P-i Bedienungsanleitung

Supermicro

Supermicro AS -1014S-WTRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029U-T Series Bedienungsanleitung

Supermicro

Supermicro SSG-6049P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-741GE-TNRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-N32R Bedienungsanleitung

Supermicro

Supermicro SuperServer 220BT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1027R-73DBRF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220TP-HC8TR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029C-TN2 Bedienungsanleitung

Supermicro

Supermicro 4048B-TR4FT Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-WT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521AD-TN2 Bedienungsanleitung

Supermicro

Supermicro AS -1024US-TRT Bedienungsanleitung

Supermicro

Supermicro 7048GR-TR Betriebsanleitung

Supermicro

Supermicro SuperServer 6049P-E1CR45H Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029AP-TN2 Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-620P-ACR12H Bedienungsanleitung

Supermicro

Supermicro A+ Server 2123BT-HTR Bedienungsanleitung

Supermicro

Supermicro 8014T-T Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation SYS-751A-I Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F1114S-RNTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018R-WR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung