Supermicro SUPERSERVER 6028TP-HC0R Bedienungsanleitung

USER'S MANUAL

Revision 1.0a

SUPERSERVER®

6028TP-HC0R

6028TP-HC0TR

6028TP-HC0FR

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0a

Release Date: March 06, 2018

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer

6028TP-HC0R/HC0TR/HC0FR. Installation and maintenance should be performed

by experienced technicians only.

The SuperServer 6028TP-HC0R/HC0TR/HC0FR is a high-end server based

on the SC827HQ+-R2K02B 2U rackmount chassis and the dual processor

X10DRT-P/PT/PIBF serverboard. Both models have an IPMI LAN port and four

serverboard nodes with three hot-swap Hard Disk Drives (HDD) each per node.

Manual Organization

Chapter 1: Introduction

           

the server system and describes the main features of the X10DRT-P/PT/PIBF

serverboard and the SC827HQ+-R2K02B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer



prior to powering up the system. If your server was ordered without processor and

memory components, this chapter will refer you to the appropriate sections of the

manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Safety Warnings

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6028TP-HC0R/HC0TR/HC0FR.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRT-P/PT/PIBF serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when



SUPERSERVER 6028TP-HC0R/HC0TR/HC0FR USER'S MANUAL

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC827HQ+-R2K02B server

chassis. You should follow the procedures given in this chapter when installing,

          

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Appendix C: Chinese Safety Warnings

SUPERSERVER 6028TP-HC0R/HC0TR/HC0FR USER'S MANUAL

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS ................................................................................................................. 1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots ....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-3

Graphics Controller ......................................................................................... 1-3

 ........................................................................................................ 1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-4

Front Control Panel......................................................................................... 1-4

I/O Ports.......................................................................................................... 1-4

Cooling System............................................................................................... 1-4

Air Shrouds ..................................................................................................... 1-4

Mounting Rails ................................................................................................ 1-4

1-5 Contacting Supermicro.................................................................................... 1-6

1-6 2U Twin2: System Notes ................................................................................. 1-7

Nodes.............................................................................................................. 1-7

System Power................................................................................................. 1-7

SAS/SATA Backplane...................................................................................... 1-7

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

2-4 Warnings and Precautions .............................................................................. 2-2

Choosing a Setup Location............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

 ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

SUPERSERVER 6028TP-HC0R/HC0TR/HC0FR USER'S MANUAL

vii

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Separating the Sections of the Rack Rails..................................................... 2-4

Installing the Inner Rail Extension .................................................................. 2-5

Outer Rack Rails............................................................................................. 2-6

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Button....................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

3-4 Hard Drive Carrier LEDs................................................................................. 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

5-3 Rear I/O Ports................................................................................................. 5-3

5-4 Processor and Heatsink Installation................................................................ 5-4

Installing a Passive CPU Heatsink ................................................................. 5-7

Removing the Heatsink................................................................................... 5-8

5-5 Installing Memory............................................................................................ 5-9

Memory Support.............................................................................................. 5-9

Table of Contents

viii

5-6 Adding PCI Expansion Cards ........................................................................5-11

5-7 Serverboard Details ...................................................................................... 5-12

X10DRT-P/PT/PIBF Quick Reference........................................................... 5-13

 .................................................................................... 5-14

5-9 Jumper Settings ............................................................................................ 5-17

Explanation of Jumpers ................................................................................ 5-17

5-10 Onboard Indicators........................................................................................ 5-19

5-11 PCI-Express and SATA Connections............................................................ 5-21

5-12 Installing Software......................................................................................... 5-22

SuperDoctor® 5 ............................................................................................ 5-23

5-13 Onboard Battery............................................................................................ 5-24

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Chassis Cover................................................................................................. 6-3

6-4 Air Shrouds ..................................................................................................... 6-4

  ....................................................................................... 6-5

6-6 System Fans ................................................................................................... 6-5

 ........................................................................... 6-5

6-7 Removing and Installing the Backplane.......................................................... 6-8

Removing the Backplane ................................................................................ 6-8

Installing the Backplane................................................................................ 6-10

6-8 Installing the Serverboard ..............................................................................6-11

I/O Shield .......................................................................................................6-11

Permanent and Optional Standoffs................................................................6-11

6-9 Adapter Card Replacement........................................................................... 6-13

Add-on Card/Expansion Slot Setup .............................................................. 6-14

6-10 Drive Bay Installation/Removal ..................................................................... 6-15

Accessing the Drive Bays ............................................................................. 6-15

6-11 Power Supply................................................................................................ 6-19

Power Supply Replacement.......................................................................... 6-19

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

 ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

SUPERSERVER 6028TP-HC0R/HC0TR/HC0FR USER'S MANUAL

 ...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-32

7-5 IPMI............................................................................................................... 7-34

7-6 Security Settings ........................................................................................... 7-36

7-7 Boot Settings................................................................................................. 7-37

7-8 Save & Exit ................................................................................................... 7-39

Appendix A BIOS Error Beep Codes

Appendix B System Specications

Appendix C Chinese Safety Warnings

Table of Contents

Notes

SUPERSERVER 6028TP-HC0R/HC0TR/HC0FR USER'S MANUAL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro A+ AS -2114GT-DNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028GR-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 620C-TN12R Bedienungsanleitung

Supermicro

Supermicro A+ 1014S-WTRT Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9D-16C-IP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6035B-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029U-T Series Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018R-TDTP Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019D-FRN8TP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022L-6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5013C-M8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-T Bedienungsanleitung

Supermicro

Supermicro SSG-937R-E2CJB Bedienungsanleitung

Supermicro

Supermicro 8050 Bedienungsanleitung

Supermicro

Supermicro SuperStorageServer 1029P-NES32R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221H-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-440P-TNRT Bedienungsanleitung

Supermicro

Supermicro 8042-6 Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9D-4CN8TP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-HTR-SIOM Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-T Series Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F2014S-RNTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021H Bedienungsanleitung

Supermicro

Supermicro A+ AS-1113S-WN10RT Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung