Supermicro SSG-937R-E2CJB Bedienungsanleitung

Super Storage Bridge Bay

SSG-937R-E2CJB

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the manufacturer’s instruction manual, may cause harmful interference with

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: September 7, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SSG-937R-E2CJB. Installa-

tion and maintenance should be performed by experienced technicians only.

The SSG-937R-E2CJB is a high-end storage solution based on the SC937 3U

rackmount chassis and two AOM-SAS3-937EL-JB expanders.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the AOM-SAS3-937EL-JB

serverboard and the SC937ETS chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SSG-937R-E2CJB into a

rack and check out the server conguration prior to powering up the system.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panels on the chassis as well the HDD carrier

LEDs.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SSG-937R-E2CJB.

Chapter 5: Advanced Chassis Setup

Refer to Chapter 5 for detailed information on the SC937 chassis. You should follow

the procedures given in this chapter when installing, removing or reconguring SAS

or peripheral drives and when replacing system power supply units and cooling fans.

Appendix A: System Specications

SSG-937R-E2CJB User's Manual

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 SAS Expander................................................................................................. 1-2

Cascading ....................................................................................................... 1-2

IPMI................................................................................................................. 1-2

SAS ................................................................................................................. 1-2

1-3 Server Chassis Features ................................................................................ 1-2

System Power................................................................................................. 1-2

SAS Subsystem .............................................................................................. 1-2

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 SBB: Storage Bridge Bay ............................................................................... 1-3

1-5 Contacting Supermicro.................................................................................... 1-4

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Installing the Inner Rack Rails ........................................................................ 2-4

Installing the Outer Rack Rails ....................................................................... 2-5

Installing the Chassis into a Rack................................................................... 2-6

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Button....................................................................................... 3-1

Power .............................................................................................................. 3-1

SSG-937R-E2CJB User's Manual

vii

3-3 Control Panel LEDs ........................................................................................ 3-1

Power Fail ....................................................................................................... 3-1

Overheat/Fan Fail: .......................................................................................... 3-2

Cascading Status (IN)..................................................................................... 3-2

Cascading Status (OUT)................................................................................. 3-2

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Chassis Setup

5-1 Static-Sensitive Devices.................................................................................. 5-1

Precautions ..................................................................................................... 5-1

5-2 Control Panel .................................................................................................. 5-2

5-3 System Fans ................................................................................................... 5-3

System Fan Failure......................................................................................... 5-3

Replacing System Fans .................................................................................. 5-3

5-4 Drive Bay Installation/Removal ....................................................................... 5-5

Accessing the Drive Bays ............................................................................... 5-5

Hard Drive Midplane ....................................................................................... 5-5

SAS Drive Installation ..................................................................................... 5-5

5-5 Midplane.......................................................................................................... 5-8

5-6 Power Supply.................................................................................................. 5-9

Power Supply Failure...................................................................................... 5-9

Replacing the Power Supply........................................................................... 5-9

Appendix A System Specications

Table of Contents

Notes

viii

SSG-937R-E2CJB User's Manual

Chapter 1

Introduction

1-1 Overview

The SSG-937R-E2CJB is a high-end Super Storage Bridge Bay (SBB) JBOD system

comprised of two main subsystems: the SC937 chassis and two AOM-SAS3-937EL-

JB SAS expander cards.

In addition to the chassis and expander cards, various hardware components have

been included with the 937R-E2CJB, as listed below:

• Twelve 4-cm fans (FAN-0157L4)

• SAS Accessories

One SAS midplane (BPN-SAS3-937)

Sixteen hard drive carriers (MCP-220-93703-0B)

• One set of rackmount hardware (MCP-290-00057-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://www.supermicro.com/about/policies/safety_informa-

tion.cfm

If you have any questions, please contact our support team at:

[email protected]m

Chapter 1: Introduction

1-1

1-2

SSG-937R-E2CJB User's Manual

1-2 SAS Expander

The SSG-937R-E2CJB includes two AOM-SAS3-937EL-JB expanders mounted in

hot-swappable trays. The AOM-SAS3-937EL-JB utilizes the LSISAS3x40, which is

a 40-port, 12 Gb/s SAS expander.

Cascading

Each AOM-SAS3-937EL-JB has two SAS-IN and two SAS-OUT ports, which are

located at the rear of the chassis. The IN ports are used to connect to a SAS con-

troller while the OUT ports are used to cascade to other JBODs.

IPMI

Each AOM-SAS3-937EL-JB comes with an onboard Aspeed2400 controller, which

provides system management. The IPMI interface is accessible through an RJ45

port at the rear of each node. This dedicated IPMI RJ45 port is set to DHCP by

default. Depressing the reset button for 6 seconds will change it to a static IP

address of 192.168.1.99. Depressing the reset button again and holding it for 12

seconds will set it (along with any other BMC settings) back to the factory default.

1-3 Server Chassis Features

System Power

The system features a redundant Titanium Level 1200W power supply composed of

two separate power modules. This power redundancy feature allows you to replace

a failed power module without shutting down the system.

SAS Subsystem

The SSG-937R-E2CJB supports up to 16 3.5" SAS drives. These drives are

hot-swappable and are connected to a midplane that provides power and control.

Front Control Panel

Two control panels are included on each end of the SSG-937R-E2CJB to provide

you with system monitoring and control. LEDs indicate system power, cascade

status, system overheat and power supply failure. Each set of LEDs are associ-

ated with the node/serverboard on the same side of the chassis. A single power

button is located on the right side control panel. When pressed, both nodes will

power on or off.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 1018R-WR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-HTR Bedienungsanleitung

Supermicro

Supermicro H12SSFR-AN6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029C-TN2 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-520P-WTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6027R-72RF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-NT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022L-6 Bedienungsanleitung

Supermicro

Supermicro SSG-2029P-ACR24H Bedienungsanleitung

Supermicro

Supermicro SuperServer 220BT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029P-C1R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6025B-3 Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-2021A-T2R+F Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-120TP-DTTR Bedienungsanleitung

Supermicro

Supermicro SSG-6049P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-5039MC-H8TRF Bedienungsanleitung

Supermicro

Supermicro SSG-5049P-E1CR45L Betriebsanleitung

Supermicro

Supermicro SUPERO SUPERSERVER 2027GR-TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-DNCR Bedienungsanleitung

Supermicro

Supermicro SuperServer 7089P-TR4T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1015B-M3 Bedienungsanleitung

Supermicro

Supermicro Altus 1804i Kurzanleitung

Supermicro

Supermicro SUPERSERVER 6038R-TXR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6019P-WT Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung