Supermicro SUPERSERVER 8048B-TR3 Bedienungsanleitung

SUPERSERVER®

8048B-TR3F

8048B-C0R3FT

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: July 10, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer

8048B-TR3F/C0R3FT Installation and maintainance should be performed by

experienced technicians only.

The SuperServer 8048B-TR3F/C0R3FT is a high-end server based on the

748TQ-R1K43B tower/4U rackmount chassis and the X10QBL-(CT) quad processor

serverboard. The only difference between the two server models is that the

8048B-C0R3FT server contains both SATA and SAS connections and 10G LAN

Ports, while the 8048B-TR3F server only has SATA connections and 1G LAN Ports..

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10QBL-(CT) serverboard

and the 748TQ-R1K43B tower/4U rackmount chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer

8048B-TR3F/C0R3FT into a rack and check out the server conﬁguration prior to

powering up the system. If your server was ordered without processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 8048B-TR3F/C0R3FT.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10QBL-(CT) serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

SUPERSERVER 8048B-TR3F/C0R3FT User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the 748TQ-R1K43B server tower/4U

rackmount chassis. You should follow the procedures given in this chapter when

installing, removing or reconﬁguring SAS/SATA or peripheral drives and when

replacing system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed

information on running the CMOS Setup Utility for the X10QBL-(CT) serverboard.

Appendix A: BIOS Error Beep Codes

Appendix B: Installing Windows

Appendix C: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

SAS (8048B-C0R3FT Server Only) ................................................................ 1-3

Onboard Controllers/Ports .............................................................................. 1-3

Graphics Controller ......................................................................................... 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power ................................................................................................. 1-4

Hard Drive Subsystem .................................................................................... 1-4

Mobile Rack .................................................................................................... 1-4

Peripheral Drives............................................................................................. 1-4

PCI Expansion Slots ....................................................................................... 1-4

Front Control Panel......................................................................................... 1-5

I/O.................................................................................................................... 1-5

Mounting Rails (Optional) ............................................................................... 1-5

Cooling System ............................................................................................... 1-5

1-4 Advanced Power Management....................................................................... 1-6

Intel® Intelligent Power Node Manager (NM)................................................. 1-6

Manageability Engine (ME)............................................................................. 1-6

1-5 Contacting Supermicro.................................................................................... 1-7

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Cautions!.................................................................................. 2-2

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

SUPERSERVER 8048B-TR3F/C0R3FT User's Manual

vii

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-4

2-5 Installing the System into a Rack ................................................................... 2-4

Removing the Feet.......................................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-6

2-6 Tower Conﬁguration Instructions....................................................................2-11

2-7 Checking the Serverboard Setup.................................................................. 2-12

2-8 Checking the Drive Bay Setup...................................................................... 2-14

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

Power .............................................................................................................. 3-2

Reset............................................................................................................... 3-2

3-2 Control Panel Buttons ..................................................................................... 3-2

3-3 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal ........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports.......................................................................................................... 5-4

Table of Contents

viii

5-4 Installing the Processor and Heatsink ............................................................ 5-5

Installing the E7-4800/8800 v3 Series Processor ......................................... 5-5

Installing a Passive CPU Heatsink ................................................................. 5-9

Removing the Heatsink................................................................................. 5-10

5-5 Installing Memory...........................................................................................5-11

Memory Support.............................................................................................5-11

Processor & Memory Module Population Conﬁguration............................... 5-12

Fully-Populated Conﬁguration .................................................................. 5-12

Half-Populated Conﬁguration ................................................................... 5-12

Populating Memory Modules.................................................................... 5-13

Other Important Notes and Restrictions................................................... 5-15

5-6 Adding PCI-E Add-On Cards ........................................................................ 5-15

5-7 Serverboard Details ...................................................................................... 5-16

5-8 Connector Deﬁnitions ................................................................................... 5-19

5-9 Jumper Settings ............................................................................................ 5-26

Explanation of Jumpers ................................................................................ 5-26

5-10 Onboard Indicators........................................................................................ 5-29

5-11 SAS/SATA Ports............................................................................................ 5-31

5-12 Installing Software......................................................................................... 5-32

SuperDoctor 5 ............................................................................................... 5-33

5-13 Serverboard Battery ...................................................................................... 5-35

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Conﬁguring the Storage Module ..................................................................... 6-3

Tower or Rack Conﬁguration........................................................................... 6-3

Adding Drives to the Storage Module............................................................. 6-5

Adding Five Hard Drives to a Supermicro Mobile Rack:................................ 6-8

6-4 Installing Hard Drives.................................................................................... 6-10

Add-on Card/Expansion Slot Setup .............................................................. 6-12

6-5 Installing the Air Shroud................................................................................ 6-14

6-6 System Fans ................................................................................................. 6-15

Replacing a Front Chassis Fan .................................................................... 6-15

Replacing a Rear Chassis Fan..................................................................... 6-16

6-7 Power Supply ............................................................................................... 6-17

Power Supply Failure.................................................................................... 6-17

SUPERSERVER 8048B-TR3F/C0R3FT User's Manual

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting the Setup Utility ................................................................................. 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations...................................................................... 7-3

7-4 Event Logs .................................................................................................... 7-30

7-5 IPMI............................................................................................................... 7-32

7-6 Security......................................................................................................... 7-35

7-7 Boot............................................................................................................... 7-36

7-8 Save & Exit ................................................................................................... 7-38

Appendix A BIOS Error Beep Codes

A-1 BIOS Error Beep Codes .................................................................................A-1

Appendix B System Speciﬁcations

Table of Contents

Notes

SUPERSERVER 8048B-TR3F/C0R3FT User's Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro AS-4124GS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019C-FHTN8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2029GP-TR Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DC0R Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-2029P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-WTR Bedienungsanleitung

Supermicro

Supermicro AS-1124US-TNR Bedienungsanleitung

Supermicro

Supermicro 2028UT-BC1NRT Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6029P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018R-M Bedienungsanleitung

Supermicro

Supermicro Superserver Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028GR-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029GP-TR Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640SP-E1CR90 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-621BT-DNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-121E-NES24R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-M Bedienungsanleitung

Supermicro

Supermicro SuperServer 6010L Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-8Q Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1115CS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer ARS-110M-NR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029U-MTNRV Bedienungsanleitung

Supermicro

Supermicro SuperServer 5017R-iHDP Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-8C Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung