Supermicro 6028R-E1CR12T Bedienungsanleitung

SUPER STORAGE SYSTEM

6028R-E1CR12T

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: July 27, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the 6028R-E1CR12T. Installation

and maintainance should be performed by experienced technicians only.

The 6028R-E1CR12T is a high-end storage system based on the SC826BE1C-

R920LP 2U rackmountable chassis and the X10DRH-CT dual processor serverboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

system and describes the main features of the X10DRH-CT serverboard and the

SC826BE1C-R920LP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the 6028R-E1CR12T into a

rack and check out the server conguration prior to powering up the system. If your

server was ordered without processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Safety Warnings

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

6028R-E1CR12T.

SUPERSTORAGESYSTEM 6028R-E1CR12T User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRH-CT serverboard, includ-

ing the locations and functions of connections, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when recong-

uring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC826BE1C-R920LP chassis.

You should follow the procedures given in this chapter when installing, removing

or reconguring hard or peripheral drives and when replacing system power supply

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the BIOS utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS ................................................................................................................ 1-2

SATA .............................................................................................................. 1-2

PCI-E Expansion Slots.................................................................................... 1-2

Rear I/O Ports................................................................................................. 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drive Subsystem .................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Separating the Sections of the Rack Rails..................................................... 2-4

Installing the Inner Rail Extension .................................................................. 2-4

Outer Rack Rails............................................................................................. 2-6

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

SUPERSTORAGESYSTEM 6028R-E1CR12T User's Manual

vii

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Power Fail ....................................................................................................... 3-2

Information LED .............................................................................................. 3-2

NIC1 ................................................................................................................ 3-3

NIC2 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-4

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

5-2 Processor and Heatsink Installation................................................................ 5-2

Installing a Passive CPU Heatsink ................................................................. 5-5

Removing the Heatsink................................................................................... 5-5

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables ................................................................................. 5-6

Connecting Power Cables .............................................................................. 5-6

5-4 I/O Ports.......................................................................................................... 5-7

LAN Ports........................................................................................................ 5-7

5-5 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-9

5-6 Serverboard Details ...................................................................................... 5-10

X10DRH-CT Quick Reference ...................................................................... 5-10

Table of Contents

viii

5-7 Connector Denitions.................................................................................... 5-13

Front Control Panel....................................................................................... 5-14

5-8 Jumper Settings ............................................................................................ 5-21

5-9 Onboard Indicators........................................................................................ 5-23

5-10 SATA/SAS Ports............................................................................................ 5-25

5-11 Installing Software......................................................................................... 5-26

SuperDoctor® 5 ............................................................................................ 5-27

5-12 Onboard Battery............................................................................................ 5-28

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Accessing the Inside of the Chassis............................................................... 6-2

6-4 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans .................................................................................. 6-4

6-5 Air Shroud ....................................................................................................... 6-5

6-6 Drive Bay Installation/Removal ....................................................................... 6-6

Accessing the Drive Bays ............................................................................... 6-6

SAS/SATA Drive Installation............................................................................ 6-6

Hard Drive Backplane ..................................................................................... 6-8

Installing the Rear 2.5" Hard Drive................................................................. 6-9

6-7 Power Supply.................................................................................................6-11

Power Supply Failure.....................................................................................6-11

Removing/Replacing the Power Supply.........................................................6-11

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-39

7-5 IPMI............................................................................................................... 7-41

7-6 Security Settings ........................................................................................... 7-43

7-7 Boot Settings................................................................................................. 7-44

7-8 Save & Exit ................................................................................................... 7-46

Appendix A BIOS Error Beep Codes

Appendix B System Specications

SUPERSTORAGESYSTEM 6028R-E1CR12T User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperStorageSystem 6028R-E1CR12T is comprised of two main subsys-

tems: the SC826BE1C-R920LP 2U chassis and the X10DRH-CT dual processor

serverboard. Please refer to our website for information on operating systems that

have been certied for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 6028R-E1CR12T, as listed below:

•Two passive CPU heatsinks (SNK-P0048PS)

•Three 8-cm system fans (FAN-0126L4)

•One air shroud (MCP-310-29001-0N)

•SAS3/SATA3 Storage

One SATA backplane (BPN-SAS3-826EL1)

Twelve drive carriers (MCP-220-00075-OB)

•Hardware RAID Controller ( AOC-S3108L-H8IR)

•One rackmount kit (MCP-290-00053-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://www.supermicro.com/about/policies/safety_informa-

tion.cfm

•If you have any questions, please contact our support team at:

[email protected]m

Chapter 1: Introduction

1-1

1-2

SUPERSTORAGESYSTEM 6028R-E1CR12T User's Manual

1-2 Serverboard Features

The SuperStorageSystem 6028R-E1CR12T is built around the X10DRH-CT, a dual

processor serverboard based on the Intel C612 chipset. Below are the main features

of the X10DRH-CT. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X10DRH-CT supports single or dual Intel® E5-2600 (v3) processors in Socket

R3, LGA 2011 type sockets. Please refer to our website for a complete listing of

supported processors (www.supermicro.com).

Memory

The X10DRH-CT has 16 DIMM slots that can support up to 1 TB of Load Reduced

(LRDIMM) ECC registered memory or up to 512 GB of registered (RDIMM) DDR4-

2133/1866/1600 memory. Please refer to Chapter 5 for details on installing memory.

SAS

An LSI 3108 SAS controller is included on the serverboard to support up to eight

SAS 3.0 ports with RAID 0, 1, 5, 6, 10, 50 and 60.

SATA

A SATA controller is integrated into the C612 chipset to provide ten SATA 3.0 ports,

with RAID 0, 1, 5 and 10.

Note: The SATA drives are hot-swappable units. You must have your RAID set up

to enable the hot-swap capability of the SATA drives. Documentation on RAID setup

guidelines can be found on our website.

PCI-E Expansion Slots

The X10DRH-CT has six PCI-E 3.0 x8 slots and one PCI-E 3.0 x16 slot. Note

that the PCI slots are controlled by the CPUs so only three slots (Slot1-Slot3 ) are

available if both CPUs are not installed on the board at the same time. (CPU1:

Slot1-Slot3, CPU2: Slot4-Slot7.) See Figure 1-1 and the serverboard layout in

Chapter 5 for details.

Rear I/O Ports

Inhaltsverzeichnis

Andere Supermicro Lagerung Handbücher

Supermicro

Supermicro SUPER 2027R-AR24NV Bedienungsanleitung

Supermicro

Supermicro 6048R-E1CR36L Bedienungsanleitung

Supermicro

Supermicro 6048R-E1CR72L Bedienungsanleitung

Supermicro

Supermicro 6048R-E1CR60N Bedienungsanleitung

Supermicro

Supermicro SuperServer 110C-FHN4T Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-121E-NE316R Bedienungsanleitung

Supermicro

Supermicro 6048R-E1CR24H Bedienungsanleitung

Supermicro

Supermicro 6048R-E1CR36N Bedienungsanleitung

Supermicro

Supermicro 2028R-ACR24L Bedienungsanleitung

Supermicro

Supermicro SUPERO SC847DJ Series Bedienungsanleitung

Supermicro

Supermicro Supero SC847DE16-R1K28LPB Bedienungsanleitung

Supermicro

Supermicro 2028R-E1CR24L Bedienungsanleitung

Supermicro

Supermicro 6037R-E1R16L Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-540P-E1CTR45L Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-620P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SSG-2028R-DN2R20L Bedienungsanleitung

Supermicro

Supermicro Supero 6037R-E1R16N Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-640SP-E1CR60 Bedienungsanleitung

Supermicro

Supermicro SUPER 6047R-E1CR36N Bedienungsanleitung

Supermicro

Supermicro 2028R-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-136R-NR32JBF Bedienungsanleitung

Supermicro

Supermicro SuperStorage 6028R-E1CR12H Bedienungsanleitung

Supermicro

Supermicro 6038R-E1CR16H Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem 6038R-E1CR16L Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung