Supermicro SC826 JBOD Bedienungsanleitung

USER’S MANUAL

Revision 1.0a

SC826 JBOD



CSE-826BE1C-R609JBOD CSE-826BE2C-R609JBOD

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A or Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in

industrial environment for Class A device or in residential environment for Class B device. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the manufacturer’s instruction manual, may cause harmful interference with

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

Manual Revision 1.0a

Release Date: May 25, 2021 mk

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the chassis. Installation and

maintenance should be performed by experienced technicians only.

This document lists compatible parts available when this document was published.

Refer to the Supermicro web site f

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SC826 JBOD Chassis Manual

Contents

Chapter 1 Introduction..............................................................................1-1

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping List.................................................................................................... 1-1

1-3 Components.................................................................................................... 1-2

Drives .............................................................................................................. 1-2

Power Supply.................................................................................................. 1-2

Cooling ............................................................................................................ 1-2

Control Board.................................................................................................. 1-2

Mounting Rails ................................................................................................ 1-2

1-4 Where to get Replacement Components........................................................ 1-2

1-5 Returning Merchandise for Service................................................................. 1-2

1-6 Contacting Supermicro .................................................................................. 1-4

Chapter 2 Standardized Warning Statements for AC Systems ............ 2-1

About Standardized Warning Statements....................................................... 2-1

 ........................................................................................... 2-1

Installation Instructions.................................................................................... 2-4

Circuit Breaker ................................................................................................ 2-5

Power Disconnection Warning ........................................................................ 2-6

Equipment Installation..................................................................................... 2-8

Restricted Area................................................................................................ 2-9

Battery Handling............................................................................................ 2-10

Redundant Power Supplies ......................................................................... 2-12

Backplane Voltage ........................................................................................ 2-13

Comply with Local and National Electrical Codes........................................ 2-14

Product Disposal........................................................................................... 2-15

Hot Swap Fan Warning................................................................................. 2-16

Power Cable and AC Adapter ...................................................................... 2-18

Chapter 3 System Interface......................................................................3-1

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Power .............................................................................................................. 3-2

UID and IPMI Reset Button ............................................................................ 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Power .............................................................................................................. 3-2

NIC .................................................................................................................. 3-2

Power Fail ....................................................................................................... 3-3

Contents

Information LED .............................................................................................. 3-3

Overheating..................................................................................................... 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Chassis Setup and Maintenance ...........................................4-1

4-1 Overview ......................................................................................................... 4-1

4-2 Power Up/Power Down Sequences................................................................ 4-2

Power Up ........................................................................................................ 4-2

First Use or Power Cord Plug-In................................................................ 4-2

After Normal Shutdown by IPMI or Power Button ..................................... 4-2

After a Power Loss..................................................................................... 4-2

Power Down.................................................................................................... 4-2

Removing Power from the System ................................................................. 4-3

4-3 Cable Connections.......................................................................................... 4-3

IPMI................................................................................................................. 4-3

SAS Cables..................................................................................................... 4-4

Cascading Storage.......................................................................................... 4-5

4-4 Removing the Chassis Cover ......................................................................... 4-7

4-5 Installing Hard Drives...................................................................................... 4-8

Removing a Hard Drive Carrier ...................................................................... 4-8

Installing Hard Drives...................................................................................... 4-9

4-6 System Fans ..................................................................................................4-11

4-7 Power Supply ............................................................................................... 4-13

Power Distributor........................................................................................... 4-14

4-8 Control Board................................................................................................ 4-15

4-9 Backplane...................................................................................................... 4-16

Chapter 5 Chassis Installation

5-1 Unpacking the System .................................................................................... 5-1

5-2 Preparing for Setup......................................................................................... 5-1

Choosing a Setup Location............................................................................. 5-1

5-3 Warnings and Precautions.............................................................................. 5-2

Rack Precautions............................................................................................ 5-2

Server Precautions.......................................................................................... 5-2

Rack Mounting Considerations ....................................................................... 5-3

Ambient Operating Temperature ................................................................ 5-3

 ......................................................................................... 5-3

Mechanical Loading ................................................................................... 5-3

Circuit Overloading..................................................................................... 5-3

Reliable Ground ......................................................................................... 5-3

SC826 JBOD Chassis Manual

5-4 Installing the System into a Rack ................................................................. 5-4

Identifying the Sections of the Rack Rails...................................................... 5-4

Releasing the Inner Rail ................................................................................. 5-5

Installing the Inner Rails on the Chassis ........................................................ 5-6

Installing the Outer Rails onto the Rack......................................................... 5-7

Sliding the Chassis onto the Rack Rails......................................................... 5-8

Chapter 6 CSE-PTJBOD-CB3 Control Board..........................................6-1

6-1 Overview ......................................................................................................... 6-1

6-2 Safety Guidelines............................................................................................ 6-1

ESD Safety Guidelines ................................................................................... 6-1

General Safety Guidelines .............................................................................. 6-2

6-3 Components, Connectors, Jumpers and LEDs .............................................. 6-2

........................................................... 6-3

Jumpers and LED Indicators........................................................................... 6-4

6-4 I2C Cabling to the Backplane.......................................................................... 6-6

6-5 JBOD Power Up/Power Down Sequences..................................................... 6-7

Power Up ........................................................................................................ 6-7

Power Down.................................................................................................... 6-7

6-6 BMC ................................................................................................................ 6-8

BMC ADMIN User Password .......................................................................... 6-8

IP Address....................................................................................................... 6-8

Appendix A SC826 JBOD Power Supply Specications...................... A-1

Appendix B BPN-SAS3-826EL Backplane Specications.................... B-1

Appendix C Compliance.......................................................................... C-1

Chapter 1

Introduction

1-1 Overview

The SC826 JBOD storage enclosure Is designed to scale your Supermicro

       󰀨 

3.5" SAS/SATA hard drive bays, without compromising superior cooling capabilities.

󰀨

Just install hard drives and use an external SAS cable and connect to a host bus

adapter (HBA) on the head node server. The storage capacity can be expanded

instantly and reduce the initial investment.

  󰀩 

power savings, with specially designed optimized cooling. Quick release, tool-less

slide rails are available for quick installation.

Note: A complete list of safety warnings is provided on the Supermicro web site

at www.supermicro.com.

SC826 JBOD Chassis Models

Model HDD Power Supply

CSE-826BE1C-R609JBOD 12x SAS/SATA 650W Redundant

Platinum level

CSE-826BE2C-R609JBOD 12x SAS 650W Redundant

Platinum level

The following safety models associated with the SC826 JBOD have

been .

1-2 Shipping List

Refer to the Supermicro website for the latest shipping lists and part numbers for

your particular chassis model: https://www.supermicro.com.

Chapter 1: Introduction

1-1

SC826 JBOD Chassis Manual

1-2

1-3 Components

Drives

The chassis supports twelve hot-swap 3.5" SAS or SATA hard disk drives in the

front. The drives are supported by a backplane.

Power Supply

The chassis features two redundant digital power supplies, each 650 watts with a

󰀩

Cooling

The chassis includes three 80 mm heavy-duty, hot-swap fans and two 80 mm

exhaust fans. System fans are powered and controlled by IPMI using 4-pin

connectors.

Control Board

The JBOD control board allows the user to remotely control and monitor the chassis

󰀨

temperature data from the backplane.

Mounting Rails

Rack mount rails allow you to mount the chassis in a rack. The rails feature snap-in

installation and quick release, and support modern square hole racks. Round hole

rack are supported with a conversion kit.

1-4 Where to get Replacement Components

If you need replacement parts for your system, to ensure the highest level

of professional service and technical support, purchase exclusively from our

Supermicro Authorized Distributors/System Integrators/Resellers. A list can be found

at: http://www.supermicro.com. Click the "Where to Buy" link.

1-5 Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your vendor

for a Returned Merchandise Authorization (RMA) number. When returning to the

manufacturer, the RMA number should be prominently displayed on the outside of

1-3

Chapter 1 Introduction

the shipping carton, and mailed prepaid or hand-carried. Shipping and handling

charges will be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online (http://www.

supermicro.com/support/rma/).

Whenever possible, repack the chassis in the original Supermicro carton, using the

original packaging material. If these are no longer available, be sure to pack the

chassis securely, using packaging material to surround the chassis so that it does

not shift within the carton and become damaged during shipping.

This warranty only covers normal consumer use and does not cover damages

incurred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.



SC826 JBOD Chassis Manual

1-4

1-6 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Web Site: www.supermicro.com.tw

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Lagerung Handbücher

Supermicro

Supermicro SuperStorage 6028R-E1CR12H Bedienungsanleitung

Supermicro

Supermicro 2028R-ACR24L Bedienungsanleitung

Supermicro

Supermicro SUPER 6047R-E1CR36N Bedienungsanleitung

Supermicro

Supermicro Supero SC847DE16-R2K02JBOD Bedienungsanleitung

Supermicro

Supermicro 6038R-DE2CR16L Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem 6038R-E1CR16L Bedienungsanleitung

Supermicro

Supermicro 2028R-ACR24H Bedienungsanleitung

Supermicro

Supermicro 6028R-E1CR12T Bedienungsanleitung

Supermicro

Supermicro SuperServer 210P-FRDN6T Bedienungsanleitung

Supermicro

Supermicro 6028R-E1CR12N Bedienungsanleitung

Supermicro

Supermicro 6048R-E1CR72L Bedienungsanleitung

Supermicro

Supermicro Supero 6037R-E1R16N Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-640SP-E1CR60 Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-136R-NR32JBF Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-121E-NE316R Bedienungsanleitung

Supermicro

Supermicro 6038R-E1CR16H Bedienungsanleitung

Supermicro

Supermicro SUPER 2027R-AR24NV Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-540P-E1CTR45L Bedienungsanleitung

Supermicro

Supermicro 6048R-E1CR36N Bedienungsanleitung

Supermicro

Supermicro 2028R-E1CR24L Bedienungsanleitung

Supermicro

Supermicro 6037R-E1R16L Bedienungsanleitung

Supermicro

Supermicro 2028R-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SUPERO SC847DJ Series Bedienungsanleitung

Supermicro

Supermicro 6048R-E1CR24H Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung