Supero SC219 Chassis Series Bedienungsanleitung

SC219 Chassis Series

SC219A-R920UB SC219A-R920LPB

SC219A-R920WB

USER’S MANUAL

1.0

SUPER ®

SUPERMICR ®

SC219 Chassis Manual

Manual Revision 1.0

Release Date: June 6, 2012

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC219 chassis. Installation

and maintenance should be performed by experienced technicians only.

Supermicro’s SC219 chassis features a unique and highly optimized 2U server

design which provides optimal use of space, without compromising cooling. The

SC219 chassis is equipped with sixteen drive bays which support hot-swappable

SAS/SATA hard drives, one 5.25" drive bay and two slim peripheral drive bays. The

SC219 comes equipped with redundant 920 Watt power supplies for superb power

savings. The chassis provides maximum features in a 2U form factor.

This document lists compatible parts and congurations available when this docu-

ment was published. Always refer to our Web site for updates on supported parts

and congurations at http://www.supermicro.com

SC219 Chassis Manual

Manual Organization

Chapter 1 Introduction

The introduction provides a list of the main components included with this chassis

and describes the primary features of the SC219 chassis. This chapter also includes

contact information.

Chapter 2 System Safety

Chapter 2 lists warnings, precautions, and system safety. You should thoroughly

familiarize yourself with this chapter for a general overview of safety precautions

that should be followed before installing and servicing the SC219 chassis.

Chapter 3 System Interface

This chapter provides details on the system interface, which includes the functions

and information provided by the control panel LEDs on the chassis, and by other

LEDs located throughout the system.

Chapter 4 Chassis Setup and Maintenance

Refer to this chapter for detailed information on the chassis. Follow the procedures

given in this chapter when installing, removing, or reconguring your chassis.

Chapter 5 Rack Installation

Refer to this chapter for detailed information on chassis rack installation. You should

follow the procedures given in this chapter when installing, removing or reconguring

your chassis into a rack environment.

Appendix A

This section references cables, which are compatible with your SC219 system. Refer

to our Web site for additional information on cabling at www.supermicro.com.

Appendix B

This chapter lists supported power supply information for your SC219 system. Refer

to our Web site for additional details at www.supermicro.com.

Preface

Appendix C

This section provides detailed information on the SAS-213A backplane. Additional

information can by found on our Web site, at www.supermicro.com

SC219 Chassis Manual

Table of Contents

Manual Organization ..........................................................................................iv

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping List.................................................................................................... 1-1

1-3 Contacting Supermicro.................................................................................... 1-2

1-4 Returning Merchandise for Service................................................................. 1-3

Chapter 2 System Safety

2-1 Overview ......................................................................................................... 2-1

2-2 Warnings and Precautions .............................................................................. 2-1

2-3 Preparing for Setup......................................................................................... 2-1

2-4 Electrical Safety Precautions .......................................................................... 2-2

2-5 General Safety Precautions ............................................................................ 2-3

2-6 System Safety ................................................................................................. 2-3

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

3-4 Drive Carrier LEDs.......................................................................................... 3-4

Chapter 4 Chassis Setup and Maintenance

4-1 Overview ......................................................................................................... 4-1

4-2 Installation and General Maintenance ............................................................ 4-1

Installation Topics............................................................................................ 4-1

4-3 Removing the Chassis Cover ......................................................................... 4-2

4-4 Installing Hard Drives...................................................................................... 4-3

4-5 Installing the I/O Shield (LP Version Only) ..................................................... 4-5

I/O Shield (LP Version Only)........................................................................... 4-5

4-6 Installing Chassis Standoffs............................................................................ 4-6

Permanent and Optional Standoffs................................................................. 4-6

4-7 Installing the Motherboard .............................................................................. 4-7

4-8 Installing the Riser and Expansion Cards....................................................... 4-9

4-9 Installing the Air Shroud.................................................................................4-11

Installing the Air Shroud in the Chassis.........................................................4-11

4-10 Checking the Airow ..................................................................................... 4-12

Installation Complete..................................................................................... 4-12

4-11 System Fans ................................................................................................. 4-13

4-12 Power Supply ............................................................................................... 4-15

vii

Preface

4-13 Power Distributor........................................................................................... 4-16

4-14 Removing the Backplane .............................................................................. 4-17

4-15 Installing the Backplane ................................................................................ 4-19

Chapter 5 Rack Installation

5-1 Overview ......................................................................................................... 5-1

5-2 Unpacking the System .................................................................................... 5-1

5-3 Preparing for Setup......................................................................................... 5-1

Choosing a Setup Location............................................................................. 5-1

5-4 Warnings and Precautions .............................................................................. 5-2

Rack Precautions ............................................................................................ 5-2

General Server Precautions............................................................................ 5-2

5-5 Rack Mounting Considerations ....................................................................... 5-3

Ambient Operating Temperature ..................................................................... 5-3

Reduced Airow .............................................................................................. 5-3

Mechanical Loading ........................................................................................ 5-3

Circuit Overloading.......................................................................................... 5-3

Reliable Ground .............................................................................................. 5-3

5-6 Rack Mounting Instructions............................................................................. 5-4

Identifying the Sections of the Rack Rails...................................................... 5-4

Locking Tabs ................................................................................................... 5-5

Releasing the Inner Rail ................................................................................. 5-5

Installing The Inner Rails on the Chassis....................................................... 5-6

Installing the Outer Rails on the Rack............................................................ 5-7

Standard Chassis Installation ......................................................................... 5-8

Optional Quick Installation Method ................................................................. 5-9

Appendix A SC219 Chassis Cables

Appendix B SC219 Power Supply Specications

Appendix C SAS-213A Backplane Specications

SC219 Chassis Manual

viii

Notes

Chapter 1

Introduction

1-1 Overview

Supermicro’s SC219 chassis provides sixteen hot-swappable 2.5” SAS/SATA hard

drive bays, one 5.25” hard drive and two peripheral drive bays in an efcient 2U

form factor, designed for the most frequently encountered applications. The chassis

is also equipped with a redundant 920W Platinum Level (94%+) power supply for

superb power savings and optimized cooling.

1-2 Shipping List

Please visit the following link for the latest shipping lists and part numbers for your par-

ticular chassis model. http://www.supermicro.com/products/chassis/2U/?chs=219

Chapter 1 Introduction

1-1

SC219

Model CPU HDD I/O Slots Power

Supply

SC219A-R920UB DP/UP 16x SAS/SATA 4x FH, 2x

920W

(94%+ Platinum)

Redundant

SC219A-R920LPB DP/UP 16x SAS/SATA 7x LP

920W

(94%+ Platinum)

Redundant

SC219A-R920WB DP/UP 16x SAS/SATA 4x FH, 3x

920W

(94%+ Platinum)

Redundant

Legend:

UP = Single processor support

DP = Dual processor support

FH = Full-height, half-length

LP = Low-prole

SC219 Chassis Manual

1-2

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacic

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho Dist., New Taipei City 235

Taiwan

Tel: +886-(2) 8226-5990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: +886-(2)-8226-5990

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supero Chassis Handbücher

Supero

Supero SC835TQ Bedienungsanleitung

Supero

Supero SC111 Series Bedienungsanleitung

Supero

Supero SC502 Series Bedienungsanleitung

Supero

Supero SC731 Series Bedienungsanleitung

Supero

Supero SC747TQ-R1400B Bedienungsanleitung

Supero

Supero SC823i Bedienungsanleitung

Supero

Supero SC828 Series Bedienungsanleitung

Supero

Supero SC847 Series Bedienungsanleitung

Supero

Supero SC743i-645 Bedienungsanleitung

Supero

Supero SC836TQ-R800V Bedienungsanleitung

Supero

Supero Supero SC733 Series Bedienungsanleitung

Supero

Supero SC812 Series Bedienungsanleitung

Supero

Supero SC523L-410B Bedienungsanleitung

Supero

Supero SC502L-200B Bedienungsanleitung

Supero

Supero Supero SC743 Bedienungsanleitung

Supero

Supero SC113TQ-R700CB Bedienungsanleitung

Supero

Supero SC836A-R1200B SC836E1-R800BSC836E1-R800V Bedienungsanleitung

Supero

Supero CSE-503-200B Bedienungsanleitung

Supero

Supero SC846TQ-900B Bedienungsanleitung

Supero

Supero SC847J SAS2 Series Bedienungsanleitung

Supero

Supero SC510-200B Bedienungsanleitung

Supero

Supero SC742 Bedienungsanleitung

Supero

Supero SC748TQ-R1200B Bedienungsanleitung

Supero

Supero SC815TQ-720CB Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

Supermicro

Supermicro SC823MTQ-R700LPB Bedienungsanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung

Cisco

Cisco Nexus 7010 Bedienungsanleitung