Supero SC848 Series Bedienungsanleitung

SC848 CHASSIS SERIES

USER’S MANUAL

1.0b

SUPER ®

SC848A-R1K62B

SC848E16-R1K62B

SC848E26-R1K62B

SC848 Chassis Manual

Manual Revision 1.0b

Release Date: October 3, 2013

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC848 chassis. Installation

and maintenance should be performed by experienced technicians only.

This manual lists compatible parts available when this document was published.

Always refer to the our web site for updates on supported parts and congurations.

SC848 Chassis Manual

Manual Organization

Chapter 1 Introduction

The rst chapter provides a checklist of the main components included with this

chassis and describes the main features of the SC848 chassis. This chapter also

includes contact information.

Chapter 2 Standardized Warning Statements for AC Systems

This chapter lists warnings, precautions, and system safety. It recommended that

you thoroughly familiarize yourself installing and servicing this chassis safety pre-

cautions.

Chapter 3 System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4 Chassis Setup and Maintenance

Follow the procedures given in this chapter when installing, removing, or

reconguring your chassis.

Chapter 5 Rack Installation

Refer to this chapter for detailed information on chassis rack installation. You should

follow the procedures given in this chapter when installing, removing or reconguring

your chassis into a rack environment.

This section lists compatible cables, power supply specications, and compatible

backplanes. Not all compatible backplanes are listed. Refer to our web site for the

latest compatible backplane information.

Preface

Appendix A Cables and Hardware

This section provides information on cabling, and other hardware which is compat-

ible with your chassis. For complete information on supported cables and hardware,

refer to the Supermico web site at www.supermicro.com.

Appendix B Power Supply Specications

This chapter lists the specications of the power supplies provided with your chas-

sis. For additional information, refer to the Supermicro website at www.supermicro.

com.

Appendix C BPN-SAS-846A Backplane Specications

Appendix D BPN-SAS-846EL Backplane Specications

Appendices C and D contain detailed specications on the BPN-SAS-846A and

BPN-SAS-846EL1 and BPN-SAS-846EL2 backplanes. Additional information can

be found on the Supermicro web site at www.supermicro.com.

SC848 Chassis Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping List.................................................................................................... 1-1

Part Numbers.................................................................................................. 1-1

1-3 Where to get Replacement Components........................................................ 1-2

1-3 Contacting Supermicro.................................................................................... 1-3

1-5 Returning Merchandise for Service................................................................. 1-4

Chapter 2 Standardized Warning Statements for AC Systems

2-1 About Standardized Warning Statements....................................................... 2-1

Warning Denition ........................................................................................... 2-1

Installation Instructions.................................................................................... 2-4

Circuit Breaker ................................................................................................ 2-5

Power Disconnection Warning ........................................................................ 2-6

Equipment Installation..................................................................................... 2-8

Restricted Area................................................................................................ 2-9

Battery Handling............................................................................................ 2-10

Redundant Power Supplies .......................................................................... 2-12

Backplane Voltage ........................................................................................ 2-13

Comply with Local and National Electrical Codes........................................ 2-14

Product Disposal........................................................................................... 2-15

Hot Swap Fan Warning................................................................................. 2-16

Power Cable and AC Adapter ...................................................................... 2-18

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Power ............................................................................................................. 3-2

Reset............................................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-3

Power .............................................................................................................. 3-3

HDD................................................................................................................. 3-3

NIC1 ................................................................................................................ 3-3

NIC2 ................................................................................................................ 3-3

Information LED .............................................................................................. 3-4

Power Failure.................................................................................................. 3-4

vii

Preface

3-4 Drive Carrier LEDs.......................................................................................... 3-5

SAS/SATA Drives ............................................................................................ 3-5

SCSI Drives..................................................................................................... 3-5

Chapter 4 Chassis Setup and Maintenance

4-1 Overview ......................................................................................................... 4-1

4-2 Removing the Chassis Top Cover .................................................................. 4-2

4-3 Installing and Removing Hard Drives ............................................................. 4-3

4-4 Installing the Motherboard .............................................................................. 4-6

I/O Shield ........................................................................................................ 4-6

Permanent and Optional Standoffs................................................................. 4-7

Installing Heatsinks on the Motherboard ...................................................... 4-10

PCI Slot Setup ...............................................................................................4-11

4-5 Installing the Air Shroud................................................................................ 4-12

4-6 Checking the Server's Airow ....................................................................... 4-15

4-7 System Fans ................................................................................................. 4-16

Replacing Internal System Fans................................................................... 4-16

Installing and Removing External System Fans........................................... 4-17

4-8 Power Supply ............................................................................................... 4-19

4-9 Changing the Power Distributor Board ......................................................... 4-21

4-10 Conguring the Peripheral Drawer................................................................ 4-24

Removing the Peripheral Drawer.................................................................. 4-25

Installing 2.5" and 3.5" Drives in the Peripheral Drawer .............................. 4-26

Installing Peripheral Devices in the Peripheral Drawer ................................ 4-27

Removing Peripheral Devices from the Peripheral Drawer.......................... 4-28

Routing Cables in the Peripheral Drawer ..................................................... 4-29

4-11 Accessing the Backplane.............................................................................. 4-30

Chapter 5 Rack Installation

5-1 Overview ......................................................................................................... 5-1

5-2 Unpacking the System .................................................................................... 5-1

5-3 Preparing for Setup......................................................................................... 5-1

Choosing a Setup Location............................................................................. 5-1

5-4 Warnings and Precautions .............................................................................. 5-2

Rack Precautions............................................................................................ 5-2

General Server Precautions............................................................................ 5-2

Rack Mounting Considerations ....................................................................... 5-3

Ambient Operating Temperature ................................................................ 5-3

Reduced Airow ......................................................................................... 5-3

Mechanical Loading ................................................................................... 5-3

SC848 Chassis Manual

viii

Circuit Overloading..................................................................................... 5-3

Reliable Ground ......................................................................................... 5-3

5-5 Rack Mounting Instructions............................................................................. 5-4

Identifying the Sections of the Rack Rails...................................................... 5-4

Locking Tabs ................................................................................................... 5-5

Releasing the Inner Rail ................................................................................. 5-5

Installing The Inner Rails on the Chassis....................................................... 5-6

Installing the Outer Rails on the Rack............................................................ 5-7

Standard Chassis Installation ......................................................................... 5-8

Optional Quick Installation Method ................................................................. 5-9

Appendix A SC848 Cables and Hardware

Appendix B SC848 Power Supply Specications

Appendix C SAS-846A Backplane Specications

Appendix D BPN-SAS-846EL Backplane Specications

SC848 Chassis

Model HDD I/O Slots Power

Supply

SC848A-R1K62B 24x SAS/

SATA (7+4) FF 1620W

Redundant

SC848E16-R1K62B 24x SAS/

SATA (7+4) FF 1620W

Redundant

SC848E26-R1K62B 24x SAS/

SATA (7+4) FF 1620W

Redundant

Chapter 1

Introduction

1-1 Overview

Supermicro’s SC848 4U chassis features a unique and highly-optimized design. The

chassis is equipped with two 1620 Watt high-efciency power supplies. The SC848

chassis supports up to 2+1 redundancy for a total of 3240 Watts). High-performance

fans provide ample optimized cooling for FB-DIMM memory modules and twenty-

four hot-swappable drive bays offer maximum storage capacity.

1-2 Shipping List

Part Numbers

Please visit the following link for the latest shiping lists and part numbers for your

particular chassis model http://www.supermicro.com/

Chapter 1: Introduction

1-1

SC848 Chassis Manual

1-2

1-3 Where to get Replacement Components

Though not frequently, you may need replacement parts for your system. To en-

sure the highest level of professional service and technical support, we strongly

recommend purchasing exclusively from our Supermicro Authorized Distributors/

System Integrators/Resellers. A list of Supermicro Authorized Distributors/System

Integrators/Resellers can be found at: http://www.supermicro.com. Click the Where

to Buy link.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supero Chassis Handbücher

Supero

Supero SC219 Chassis Series Bedienungsanleitung

Supero

Supero SC111 Series Bedienungsanleitung

Supero

Supero SC510 Series Bedienungsanleitung

Supero

Supero Supero SC512 Series Bedienungsanleitung

Supero

Supero SC503 Series Bedienungsanleitung

Supero

Supero SC813 Series Bedienungsanleitung

Supero

Supero Supero SC825 Series Bedienungsanleitung

Supero

Supero SC742i Bedienungsanleitung

Supero

Supero SC812 Series Bedienungsanleitung

Supero

Supero SC835 Chassis Series Bedienungsanleitung

Supero

Supero SC811 Series Bedienungsanleitung

Supero

Supero Supero SC825 Series Bedienungsanleitung

Supero

Supero SC512C Series Bedienungsanleitung

Supero

Supero Supero SC745 Series Bedienungsanleitung

Supero

Supero Supero SC512 Series Bedienungsanleitung

Supero

Supero SC815TQ-720CB Bedienungsanleitung

Supero

Supero SC510T-200B Bedienungsanleitung

Supero

Supero SC513-L260 Series Bedienungsanleitung

Supero

Supero SC836A-R1200B SC836E1-R800BSC836E1-R800V Bedienungsanleitung

Supero

Supero SC847A-R1400LPB Bedienungsanleitung

Supero

Supero SC847BE1C series Bedienungsanleitung

Supero

Supero SC826BE1C-R920LPB Bedienungsanleitung

Supero

Supero SC748TQ-R1200B Bedienungsanleitung

Supero

Supero SC846TQ-900B Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

Supermicro

Supermicro SC823MTQ-R700LPB Bedienungsanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung

Cisco

Cisco Nexus 7010 Bedienungsanleitung