Supero SC512C Series Bedienungsanleitung

1.0

SUPER

SC512 CHASSIS

USER'S GUIDE

The SC512C/L Series

The SC512C Series

The SC512L Series

1-2

SC512 Chassis User’s Guide

The information in this User’s Guide has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates.

Please Note: For the most up-to-date version of this manual, please see our web

site at www.supermicro.com.

SUPERMICRO COMPUTER reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

Manual Revision: Rev. 1.0

Release Date: June 15, 2006

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

1-3

Chapter 1: Safety Information and Technical Speciﬁcations

Table of Contents

Chapter I: Safety Information and Technical Speciﬁcations ................ 1-4

1-1. Electrical Safety Guidelines ............................................................................ 1-4

1-2. ESD Safety Guidelines ..................................................................................... 1-4

1-3. General Safety Guidelines ............................................................................... 1-5

1-4. Operation Safety Guidelines........................................................................... 1-5

1-5. An Important Note to the User ....................................................................... 1-5

1-6. Product Compliance Information ................................................................... 1-6

1-7. Packing List and the SC512 Speciﬁcations................................................. 1-7

A. The SC512 Chassis............................................................................................... 1-7

B. The Accessory Kit .................................................................................................. 1-8

C. Chassis Speciﬁcations.......................................................................................... 1-8

D. Power Supply Speciﬁcations ................................................................................ 1-8

Chapter 2: Chassis Description and Installation Procedures ..............2-1

2-1. Chassis Description ........................................................................................ 2-1

A. Contents of the Accessory Kit ............................................................................... 2-1

B. Power Cords/SATA Cables .................................................................................... 2-1

C. Chassis Front View and the Front Control Panel ................................................ 2-2

D. Chassis Rear View and the Back Panel .............................................................. 2-3

2-2. Chassis Installation ........................................................................................ 2-4

A. Important Safety Guidelines .................................................................................. 2-4

B. Tools Needed ......................................................................................................... 2-4

C. Removing the Top Chassis Cover and the HDD Tray Bracket ............................. 2-5

D1. Removing the CD-ROM Module.......................................................................... 2-6

D2. Removing the HDD Drive Tray Housing and Installing the HDDs ...................... 2-7

E Installing the Motherboard..................................................................................... 2-8

F. Installing and Un-installing the Heatsink Mechanism ............................................ 2-9

G. Installing the Cooling Fan Module and the Air Shroud ....................................... 2-10

H. Installing Chassis Rails ..................................................................................... 2-11

I-1. Installing the Traditional UP Racks.................................................................... 2-13

I-2. Installing the Open Racks.................................................................................. 2-15

J. Installing the SC512 Chassis into the Racks....................................................... 2-18

1-4

SC512 Chassis User’s Guide

Chapter 1- Introduction

1-1 Electricity Safety

General Electrical Safety Guidelines

Use the exact type of power cords as required.

Be sure to use power cord(s) that came with safety certiﬁca-

tions.

The power cord(s) must be compliant with the AC voltage require-

ments in your region.

Plug the Power cord(s) into a socket that is properly grounded

before turning on the power.

Take extra precautionary measures when working with high voltage

components. It is not recommended to work alone.

Before removing or installing chassis components, be sure to

disconnect the power ﬁrst. Turn off the system before you dis-

connect the power supply.

•

1-2. ESD Safety Guidelines

Use a grounded wrist strap designed to prevent static discharge.

Keep all components and printed circuit boards (PCBs) in their antistatic bags

until ready for use.

Touch a grounded metal object before removing chassis components or the

motherboard from the antistatic bag.

Do not let components or PCBs come into contact with your clothing, which

may retain a charge even if you are wearing a wrist strap.

Handle a motherboard by its edges only; do not touch its components, peripheral

chips, memory modules or contacts.

When handling processors, chips or modules, avoid touching their pins.

Put the motherboard or components back into their antistatic bags when not

in use.

For the grounding purpose, make sure that your chassis provides excellent

conductivity between the power supply, the case, the mounting fasteners and

the motherboard.

•

Electric Static Discharge (ESD) can damage electronic components. To

prevent damage to your system board, it is important to handle it very

carefully. The following measures are generally sufﬁcient to protect your

equipment from ESD.

1-5

Chapter 1: Safety Information and Technical Speciﬁcations

1-3. General Safety Guidelines

Warning!! Follow the guidelines below to avoid possible

damage to the system or injury to yourself:

To avoid injuries to your back, be sure to use your leg muscles, keep your

back straight, and bend your knees, when lifting the system.

After removing the components or chassis covers from the system, place

them on a table for safeguard.

Avoid wearing loose clothing to preventing it from coming into contact with

electrical circuits or being pulled into a cooling fan.

The handles are for sliding the chassis in and out of the racks only. Do

not carry the chassis by the handles.

1-4. Operation Safety Guidelines

1. Make sure that all components and devices are securely fastened on the chassis

and there are no loose parts/screws inside the chassis.

2. Make sure that all cables are properly connected to the connectors and ports.

3. Use the original screws or fasteners to install the covers to the chassis.

4. Be sure to lock to the chassis or the system to prevent unauthorized access.

5. Please follow the procedures listed in Chapter 2 to install or remove components

to or from the SC512.

1-5. An Important Note to the User:

All images and graphics shown in this manual were based upon the latest chas-

sis Revision available at the time of publishing. The chassis you’ve received may

or may not look exactly the same as the graphics shown in this manual.

•

Warning: For proper cooling, make sure to install all chassis covers

before turning on the system. If this rule is not strictly followed, warranty

may become void. Do not open the casing of a power supply. Power

supplies can only be accessed and serviced by a qualiﬁed technician of

the manufacturer. Be sure to follow the steps below to install the chassis

covers:

1-6

SC512 Chassis User’s Guide

1-6 Product Compliance Information

If integrated with a motherboard validated and recommended by Supermicro,

and conﬁgured based upon the instructions outlined in this manual, the SC512

Chassis is compliant with the following safety standards/requirements:

Product Safety

*Canada/USA--UL60 950-CSA60 950

*European Union--EN 60 950

*International--IEC 60 950 (*Power Supply only)

Electromagnetic Compatibility (EMC)-Emissions

*European Union--EN55022: 1994

*International--CISPR 22

*USA--Title 47 CFR, Part 15

Power Line Harmonics/Voltage Flicker

*European Union--EN61000-3-2/EN61000-3-3

Electromagnetic Compatibility-Immunity

*European Union--EN55024: 1998

*International--CISPR 24

1-7

Chapter 1: Safety Information and Technical Speciﬁcations

A. The SC512 chassis contains the following:

1-7. Packing List and the SC512 Speciﬁcations

The SC512L Series:

Component Qty Part Number

Blower One (3800rpm blower) FAN-0038

HDD Two 3.5” Drives --

USB N/A --

Floppy N/A --

CD-ROM N/A --

Power 200W PWS-0043

The SC512L-260 Series:

Component Qty Part Number

Blower One (5000rpm blower) FAN-0059

HDD Two 3.5” Drives --

USB N/A --

Floppy N/A --

CD-ROM N/A --

Power 260W PWS-0055

The SC512C Series:

Component Qty Part Number

Blower One (3800rpm blower) FAN-0038

HDD One 3.5” Drive --

USB One 2.0 Connection --

Floppy One Slim FDD FPD-MISMI-02

CD-ROM One Slim CD-ROM CDM-TEAC-24

Power 200W PWS-0043

The SC512C-260 Series:

Component Qty Part Number

Blower One (5000rpm blower) FAN-0059

HDD One 3.5” Drive --

USB One 2.0 Connection --

Floppy One Slim FDD FPD-MISMI-02

CD-ROM One Slim CD-ROM CDM-TEAC-24

Power 260W PWS-0055

1-8

SC512 Chassis User’s Guide

Component Quantity

AC Power Cord 1

Screws 1 set

Rackmount Kit 1 (CSE-PT8) –(*optional)

SC512 I/O Label 2

Hard Disk Drive Mounting Kit 1

Air Shroud 1

B. The Accessory Kit

C. Chassis Speciﬁcations

Power supply spec 260W 200W

Mfr. Model# SP262-1S SP200-1S

Mfr. Part# PWS-0055 PWS-0038

Rated AC input voltage 100-240V AC 100-240V AC

Rated input frequency 50-60 Hz 50-60 Hz

Rated input current 5A MAX 5A MAX

Rated output power 260W 200W

Maximum rated BTU 1370 BTUs/Hr BTUs/Hr

Nominal DC output

+3.3V 15A 15A

+5V 25A 25A

+12V 18A 18A

-12V 1A 1A

+5Vsb 2A 2A

Specifications

Form Factor 14” mini 1U chassis support for maximum MB size:

12”x9.7” (304.7mmx 246.4mm) ATX

CPU Support Pentium 4

Expansion Card One full-height/half-length PCI Slot (w/Riser Card)

Drive Bays The SC512L Series: two 3.5” fixed, the SC512C Series:

one 3.5 fixed

Cooling System One 10cm blower (200W: 3800rpm, 260W: 5000rpm)

Front Panel LEDs One PWR LED, one HDD Activity LED, two Network

Interface LEDs, one System Overheat LED

Front Panel Buttons PowerOn/Off button, System Reset button

Dimensions 16.8”x1.7”x14.0” (427mmx43mmx356mm) (WxHxD)

Rails (Optional) Extendable 28.5” to 33.25”

Operating Temperature +100C to +350C (+500F to +950F)

Non Operating Temperature -400C to +700C (-400F to +1580F)

Humidity (Operating) 8-90% (non-condensing)

Humidity (Non-Operating) 5-95% (non-condensing)

D. Power Supply Speciﬁcations

2-1

Chapter 2: Chassis Description and Installation Instructions

F. Flat head M4 x 4 mm [0.157]

RAIL (*Not included in the shipment)

Round head M4 x 4 mm [0.157]

Flat head M5 x 12 mm [0.472]

Washer for M5

Flat head 6-32 x 5 mm [0.197]

DRIVE

Round head M3 x 5 mm [0.197]

Taper head 6-32 x 5 mm [0.197]

Pan head w/ lock 6-32 x 4.5 mm [0.177]

M/BM/B

Flat head 6-32 x 5 mm [0.197]

HDD

C. Thumb screw 6-32 x 5 mm [0.197]

(*For 2.5" HDD)

Hexagon head 6-32 x 5 mm [0.197]

Handle

(*For 3.5" HDD)

2-1 Chassis Description

A. Contents of the Accessory Kit:

The following items are included in the Accessory Kit:

Chapter 2: Chassis Description and Installation

Instructions

B. Power Cords/SATA Cables:

1. SATA Power Cord: Y Cable L=50CM (19.69")

2. SATA (Serial ATA) Cable L=25CM (9.84")

2-2

SC512 Chassis User’s Guide

1a. Power On LED 1b. HDD Activity LED

1c. NIC1 (LAN1) LED 1d. NIC2 (LAN2) LED

1e. Overheat LED

3. Front Control Panel LED Button Descriptions

/('%XWWRQ &RORU &RQGLWLRQ 'HVFULSWLRQ

*UHHQ 2Q 6\VWHP2Q3RZHU

 2II 6\VWHP2II

$PEHU %OLQN +''$FWLYLW\+''

 2II 1R$FWLYLW\

*UHHQ 2Q /LQNHG

 %OLQN /$1$FWLYLW\

/$1/$1

 2II 'LVFRQQHFWHG

5HG 2Q 6\VWHP2YHUKHDW2YHUKHDW

 2II 6\VWHP1RUPDO

C. Chassis Front View and the Front Control Panel

1. Front Panel LED Indicators

2. I/O Devices (SC512C: 1 CD-ROM and 1 HDD, SC512L: 1 CD-ROM only) 3.

USB ports (x2)

2. Front Panel LED Button Deﬁnitions

1. Front Panel and I/O Device Deﬁnitions

The SC512C Chassis Front View

The SC512L Chassis Front View

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supero Chassis Handbücher

Supero

Supero SC847J SAS2 Series Bedienungsanleitung

Supero

Supero Supero SC733 Series Bedienungsanleitung

Supero

Supero SC835TQ Bedienungsanleitung

Supero

Supero Supero SC745 Series Bedienungsanleitung

Supero

Supero SC748TQ-R1200B Bedienungsanleitung

Supero

Supero Supero SC743 Bedienungsanleitung

Supero

Supero SC827HD-R1400B Bedienungsanleitung

Supero

Supero SC826BE1C-R920LPB Bedienungsanleitung

Supero

Supero SC822R Bedienungsanleitung

Supero

Supero Supero SC836 Series Bedienungsanleitung

Supero

Supero SC836A-R1200B SC836E1-R800BSC836E1-R800V Bedienungsanleitung

Supero

Supero SC847J Series Bedienungsanleitung

Supero

Supero SC219 Chassis Series Bedienungsanleitung

Supero

Supero SC815TQ-720CB Bedienungsanleitung

Supero

Supero CSE-503-200B Bedienungsanleitung

Supero

Supero SC113TQ-R700CB Bedienungsanleitung

Supero

Supero SC836TQ - R800V(B) Bedienungsanleitung

Supero

Supero Supero SC512 Series Bedienungsanleitung

Supero

Supero Supero SC825 Series Bedienungsanleitung

Supero

Supero SC835 Chassis Series Bedienungsanleitung

Supero

Supero SC813 Series Bedienungsanleitung

Supero

Supero Supero SC743 Bedienungsanleitung

Supero

Supero SC502L-200B Bedienungsanleitung

Supero

Supero SC513-L260 Series Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Chenbro

Chenbro RB13804N4WFT Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

Supermicro

Supermicro SC823MTQ-R700LPB Bedienungsanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung