Supero Supero SMT IPMI Bedienungsanleitung

SMT IPMI

User's Guide

Revision 2.3a

Manual Revision 2.3a

Release Date: May 22, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this user’s guide has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this manual, or to notify

any person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: Refer to Supermicro's web site for FCC Compliance Information.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About this User's Guide

This user's guide is written for system integrators, IT professionals, and

knowledgeable end users who intend to congure the IPMI settings supported by

the Nuvoton WPCM450/ASpeed AST2400 BMC Controller embedded in Supermicro

motherboards. It provides detailed information on how to congure the IPMI settings

supported by the WPCM450/AST2400 controller.

Note: Nuvoton Technology is a subsidiary of Winbond Corp.

User's Guide Organization

Chapter 1 provides an overview on the Nuvoton WPCM450/ASpeed AST2400

controller. It also introduces the features and the functionality of IPMI.

Chapter 2 provides detailed instructions on how to congure the IPMI settings

supported by the WPCM450/AST2400 controller.

Chapter 3 provides the answers to frequently asked questions.

Conventions Used in This User's Guide

Pay special attention to the following symbols for proper IPMI conguration.

Warning: Important information given to avoid IPMI conguration errors,

Note: Additional information given to ensure correct IPMI conguration

setup.

iii

Preface

SMT IPMI User's Guide

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Website: www.supermicro.com.tw

Preface

Table of Contents

Preface........................................................................................................... 3

About this User's Guide ................................................................................................ 3

User's Guide Organization ............................................................................................ 3

Conventions Used in This User's Guide ....................................................................... 3

Contacting Supermicro.................................................................................................. 4

Chapter 1 Introduction..............................................................................1-1

1-1 Overview of the Nuvoton WPCM 450/ASpeed AST 2400 BMC Controller .... 1-1

WPCM450/AST2400 DDR2/DDR3 Memory Interface .................................... 1-1

WPCM450/AST2400 PCI System Interface.................................................... 1-1

WPCM450 Block Diagram .............................................................................. 1-2

1-2 Supermicro IPMI Features .............................................................................. 1-3

1-3 Introduction to the IPMI Platform .................................................................... 1-4

1-4 Supported Motherboards ................................................................................ 1-4

1-5 An Important Note to the User........................................................................ 1-4

Chapter 2 Conguring the IPMI Settings................................................2-1

2-1 Conguring BIOS ............................................................................................ 2-1

2-2 Conguring the IP/MAC Addresses for Remote Servers................................ 2-6

Using the IPMICFG Utility to Set the IP Addresses for Remote Servers....... 2-6

2-3 Connecting to the Remote Server .................................................................. 2-9

Using IPMIView to Connect to the Remote Server ........................................ 2-9

Using the Browser to Connect to the Remote Server .................................... 2-9

2-4 Accessing the Remote Server via Console Redirection Using the Browser 2-10

To Log In to the Remote Console................................................................. 2-10

2.5 IPMI Main Screen ..........................................................................................2-11

2.6 Server Health ................................................................................................ 2-14

2.6.1 Sensor Readings ................................................................................. 2-15

2.6.2 Event Log............................................................................................. 2-17

2.6.3 Power Consumption............................................................................. 2-20

2.6.4 Power Source ...................................................................................... 2-21

2.6.5 Storage Monitoring............................................................................... 2-23

2.6.6 NVMe SSD........................................................................................... 2-24

2.7 Conguration ................................................................................................. 2-25

2.7.1 Alerts .................................................................................................... 2-27

2.7.2 Date and Time ..................................................................................... 2-30

2.7.3 LDAP.................................................................................................... 2-31

2.7.4 Active Directory .................................................................................... 2-32

SMT IPMI User's Guide

2.7.5 RADIUS................................................................................................ 2-34

2.7.6 Mouse Mode ........................................................................................ 2-35

2.7.7 Network ................................................................................................ 2-36

2.7.8 Dynamic DNS ...................................................................................... 2-38

2.7.9 SMTP ................................................................................................... 2-39

2.7.10 SSL Certication ................................................................................ 2-40

2.7.11 Users .................................................................................................. 2-41

2.7.12 Port..................................................................................................... 2-43

2.7.13 IP Access Control............................................................................... 2-44

2.7.14 SNMP................................................................................................. 2-46

2.7.15 Fan Mode........................................................................................... 2-47

2.7.16 Web Session...................................................................................... 2-48

2.8 Remote Control ............................................................................................ 2-49

2.8.1 Launch Console Redirection................................................................ 2-50

2.8.1a Console Redirection - Virtual Device................................................. 2-51

2.8.1b Console Redirection - Record............................................................ 2-54

2.8.1c Console Redirection - Macro ............................................................. 2-55

2.8.1d Console Redirection - Options........................................................... 2-57

2.8.1e Console Redirection - User List......................................................... 2-69

2.8.1f Console Redirection - Capture ........................................................... 2-70

2.8.1g Console Redirection - Power Control ................................................ 2-71

2.8.1h Console Redirection - Exit ................................................................. 2-76

2.8.2 Power Control ...................................................................................... 2-77

2.8.2 Launch SOL ......................................................................................... 2-78

2.9 Virtual Media ................................................................................................. 2-80

2.9.1 Floppy Disk .......................................................................................... 2-81

2.9.2 CD-ROM Image ................................................................................... 2-82

2.10 Maintenance.................................................................................................. 2-83

2.10.1 Firmware Update ............................................................................... 2-84

2.10.2 Unit Reset .......................................................................................... 2-86

2.10.3 IKVM Reset........................................................................................ 2-87

2.10.4 Factory Default................................................................................... 2-88

2.10.5 IPMI Conguration ............................................................................. 2-89

2.10.6 System Event Log.............................................................................. 2-90

2.10.7 BIOS Update...................................................................................... 2-91

2.11 Miscellaneous........................................................................................ 2-92

2.11.1 Post Snooping.................................................................................... 2-93

2.11.2 SMC RAKP......................................................................................... 2-94

2.11.3 UID Control ........................................................................................ 2-95

Table of Contents

vii

Chapter 3 Frequently Asked Questions..................................................3-1

3-1 Frequently Asked Questions ........................................................................... 3-1

Appendix A Flash Tools ......................................................................... A-1

A-1 Overview .........................................................................................................A-1

A-2 Reference........................................................................................................A-1

A-3 Using ATEN Flash Tools in the DOS Environment.........................................A-2

Firmware Updating via KCS Channels ...........................................................A-3

Dumping Firmware from the BMC via KCS channels ....................................A-4

A-4 Using ATEN Flash Tools in Windows/Linux ...................................................A-6

Appendix B Introduction to SMASH ..................................................... B-1

B-1 Overview .........................................................................................................B-1

How SMASH works.........................................................................................B-1

SMASH Compliance Information ....................................................................B-2

B-2 An Important Note to the User........................................................................B-2

B-3 Using SMASH .................................................................................................B-3

B-4 Initiating the SMASH Protocol ........................................................................B-3

To Initiate SMASH Automatically.....................................................................B-3

B-5 SMASH-CLP Main Screen ..............................................................................B-4

B-6 Using SMASH for System Management.........................................................B-4

B-7 Denitions of Command Verbs .......................................................................B-5

B-8 SMASH Commands ........................................................................................B-7

B-9 Standard Command Options...........................................................................B-8

B-10 Target Addressing ...........................................................................................B-9

Terms Used in the Target Addressing Diagram ..............................................B-9

Appendix C RADIUS Conguration........................................................ C-1

C-1 Overview .........................................................................................................C-1

C-2 Conguring a User Account in Ubuntu ...........................................................C-1

C-3 Conguring Client Information in Ubuntu........................................................C-2

C-4 Starting the RADIUS Server in Ubuntu...........................................................C-2

C-5 Adding Roles in Windows ...............................................................................C-3

viii

SMT IPMI User's Guide

Notes

1-1

Chapter 1: Introduction

Chapter 1

Introduction

1-1 Overview of the Nuvoton WPCM 450/ASpeed AST

2400 BMC Controller

The Nuvoton WPCM450/ASpeed AST 2400 Baseboard Management Controller

(BMC) supports PCIe-based 2D VGA Graphics cores, multi-media virtualization, and

Keyboard/Video/Mouse Redirection (KVMR). The WPCM450/AST2400 controller is

ideal for networking management.

The WPCM450/AST2400 interfaces with the host system via PCI connections to

communicate with the Graphics core. It supports USB 2.0 and 3.0 for remote KVM

emulation. It also provides LPC interface support to control Super IO functions. The

BMC is connected to the network via an external Ethernet PHY module or shared

NCSI connections.

The WPCM450/AST2400 communicates with onboard components via SMBus

interface, PECI (Platform Environment Control Interface) buses, and General Pur-

pose IO ports.

WPCM450/AST2400 DDR2/DDR3 Memory Interface

The WPCM450/AST2400 controller supports DDR2/DDR3 memory with a speed of

up to 400MHz. The controller supports 128 MB of memory which is shared between

the BMC and onboard graphics card. For best signal integrity, the WPCM450/

AST2400 provides point-to-point connections.

WPCM450/AST2400 PCI System Interface

The WPCM450/AST2400 provides 32-bit, 33 MHz 3.3V PCI interface, which is com-

pliant with PCI Local Bus Specication Rev. 3.0. The PCI system interface connects

to the onboard PCI Bridge and is used by the graphics controller.

SMT IPMI User's Guide

1-2

WPCM450 Block Diagram

The following diagram represents a typical system setup for the WPCM450 con-

troller.

WPCM450

Sensors

DDR2

LPC

SPI

Serial Port

South Bridge

PCI

USB

1.1

USB

2.0

Ethernet CTRL

RMII

RJ45

PROCESSOR

RS232 Serial Port

NOR Flash

PECI

Wake-up & CTRL

VGA

PCI-E

PHY

Onboard LAN1

RJ45

Dedicated LAN

RMII

Andere Handbücher für Supero SMT IPMI

Inhaltsverzeichnis

Andere Supero Computerhardware Handbücher

Supero

Supero Supero SAS2-847EL BACKPLANE Bedienungsanleitung

Supero

Supero AOC-SIM1U Add-on Card Bedienungsanleitung

Supero

Supero X10DGO-T Bedienungsanleitung

Supero

Supero AOC-SIMSO+ Bedienungsanleitung

Supero

Supero AOC-USAS-S4ir Bedienungsanleitung

Supero

Supero SAS-216EL1/EL2 Bedienungsanleitung

Supero

Supero AOC-1UIPMI-B Bedienungsanleitung

Supero

Supero SAS 933TQ Bedienungsanleitung

Supero

Supero SAS 822TQ BACKPLANE Bedienungsanleitung

Supero

Supero SAS-827B Bedienungsanleitung

Supero

Supero SAS 828TQ BACKPLANE Bedienungsanleitung

Supero

Supero CSE-SATA-813L Bedienungsanleitung

Supero

Supero SAS-747TQ BACKPLANE Bedienungsanleitung

Supero

Supero BPN-SAS3-213A Bedienungsanleitung

Supero

Supero Supero BPN-SAS-823TQ Bedienungsanleitung

Supero

Supero Supero BPN-SATA-933 BACKPLANE Bedienungsanleitung

Supero

Supero AOC-UG-i4 Bedienungsanleitung

Supero

Supero BPN-SAS2-847DR Backplane Bedienungsanleitung

Supero

Supero AOC-SIMLC Bedienungsanleitung

Supero

Supero Supero SAS 815TQ Bedienungsanleitung

Supero

Supero Supero SAS-826A Bedienungsanleitung

Supero

Supero BPN-EXP-847DR1EL1 Bedienungsanleitung

Supero

Supero SAS-216A Bedienungsanleitung

Supero

Supero AOC-CIBQ-M1 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung