Supero SC823TQ-653LPB Bedienungsanleitung

SC823TQ-653LPB

SUPER ®

USER’S MANUAL

2.0

SC823 Chassis

Manual Revision 2.0

Release Date: November 5, 2013

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC823 chassis. Installation

and maintenance should be performed by experienced technicians only.

Supermicro’s SC823 chassis is built on the foundation of the critically acclaimed

SC822 chassis series. With advanced airow/thermal-control design, the SC823 is

optimized for the next generation platforms.

This document lists compatible parts and congurations available when this docu-

ment was published. Always refer to our Web site for updates on supported parts

and congurations.

Note: There are SC823 legacy models other than the one described in this manual,

that are no longer available. A separate legacy manual describes them.

SC823 Chassis Manual

Manual Organization

Chapter 1 Introduction

The introduction provides a summary of the main components included with this

chassis. This chapter also includes contact information.

Chapter 2 Warning Statements for AC Systems

This chapter lists warnings, precautions, and system safety. You should thoroughly

familiarize yourself with this chapter for a general overview of safety precautions

that should be followed before installing and servicing this chassis.

Chapter 3 System Components

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4 System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 5 Chassis Setup and Maintenance

Refer to this chapter for procedures for installing, removing, or reconguring com-

ponents in your chassis.

Chapter 6 Rack Installation

Refer to this chapter for procedures for installing the chassis into a rack environment.

Preface

Appendix A Chassis Cables

This section references cables, which are compatible with your SC823 system. .

Appendix B Power Supply Specications

This chapter lists supported power supply information for your SC823 system. .

Appendix C SAS-823TQ Backplane Specications

SC823 Chassis Manual

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping List.................................................................................................... 1-1

1-3 Contacting Supermicro.................................................................................... 1-2

1-4 Returning Merchandise for Service................................................................. 1-3

Chapter 2 Standardized Warning Statements for AC Systems

2-1 About Standardized Warning Statements....................................................... 2-1

Warning Denition ........................................................................................... 2-1

Installation Instructions.................................................................................... 2-4

Circuit Breaker ................................................................................................ 2-5

Power Disconnection Warning ........................................................................ 2-6

Equipment Installation..................................................................................... 2-8

Restricted Area................................................................................................ 2-9

Battery Handling............................................................................................ 2-10

Redundant Power Supplies .......................................................................... 2-12

Backplane Voltage ........................................................................................ 2-13

Comply with Local and National Electrical Codes........................................ 2-14

Product Disposal........................................................................................... 2-15

Hot Swap Fan Warning................................................................................. 2-16

Power Cable and AC Adapter ...................................................................... 2-18

Chapter 3 Chassis Components

3-1 Overview ......................................................................................................... 3-1

3-2 Components.................................................................................................... 3-1

Drives .............................................................................................................. 3-1

Motherboard.................................................................................................... 3-1

Backplane........................................................................................................ 3-1

Power Supply.................................................................................................. 3-1

Front Interface................................................................................................. 3-1

Fans ................................................................................................................ 3-2

Air Shroud ....................................................................................................... 3-2

Mounting Rails ................................................................................................ 3-2

3-3 Where to get Replacement Components........................................................ 3-2

Chapter 4 System Interface

4-1 Overview ......................................................................................................... 4-1

4-2 Control Panel Buttons ..................................................................................... 4-2

vii

Preface

4-3 Control Panel LEDs ........................................................................................ 4-2

4-4 Drive Tray LEDs.............................................................................................. 4-3

Chapter 5 Chassis Setup and Maintenance

5-1 Overview ......................................................................................................... 5-1

5-2 Removing Power from the System ................................................................. 5-1

5-3 Removing the Chassis Cover ......................................................................... 5-2

5-4 Installing Hard Drives...................................................................................... 5-3

5-5 Installing the Motherboard ............................................................................. 5-5

Optional Standoffs........................................................................................... 5-5

I/O Shield Installation...................................................................................... 5-5

Procedure........................................................................................................ 5-6

5-6 Installing Expansion Cards ............................................................................. 5-7

5-7 Installing the Air Shroud.................................................................................. 5-8

Checking the Airow ....................................................................................... 5-9

Installation Complete....................................................................................... 5-9

5-8 System Fans ................................................................................................. 5-10

5-9 Power Supply.................................................................................................5-11

Chapter 6 Rack Installation

6-1 Overview ......................................................................................................... 6-1

6-2 Unpacking the System .................................................................................... 6-1

6-3 Preparing for Setup......................................................................................... 6-1

Choosing a Setup Location............................................................................. 6-1

6-4 Warnings and Precautions .............................................................................. 6-2

Rack Precautions............................................................................................ 6-2

General Server Precautions............................................................................ 6-2

Rack Mounting Considerations ....................................................................... 6-3

Ambient Operating Temperature ................................................................ 6-3

Reduced Airow ......................................................................................... 6-3

Mechanical Loading ................................................................................... 6-3

Circuit Overloading..................................................................................... 6-3

Reliable Ground ......................................................................................... 6-3

6-5 Rack Mounting Instructions............................................................................. 6-4

Identifying the Sections of the Rack Rails...................................................... 6-4

Locking Tabs ................................................................................................... 6-5

Releasing the Inner Rail ................................................................................. 6-5

Installing The Inner Rails on the Chassis....................................................... 6-6

Installing the Outer Rails on the Rack............................................................ 6-7

Standard Chassis Installation ......................................................................... 6-8

SC823 Chassis Manual

viii

Appendix A SC823 Chassis Cables

A-1 Overview .........................................................................................................A-1

A-2 Cables Included (SAS/SATA)..........................................................................A-1

A-3 Compatible Cables..........................................................................................A-2

Alternate SAS/SATA Cables............................................................................A-2

Extending Power Cables.................................................................................A-3

Appendix B SC823 Power Supply Specications

Appendix C BPN-SAS-823T and BPN-SAS-823TQ Backplanes

C-1 ESD Safety Guidelines ...................................................................................C-1

C-2 General Safety Guidelines ..............................................................................C-1

C-3 An Important Note to Users ............................................................................C-2

C-4 Introduction to BPN-SAS-823T/BPN-SAS-823TQ Backplanes.......................C-2

C-5 Front Connectors ............................................................................................C-3

C-6 Front Jumpers and Pin Denitions..................................................................C-6

Explanation of Jumpers ..................................................................................C-6

Jumper Settings (SAS-823T Only)..................................................................C-8

C-7 Rear Connectors and LED Indicators.............................................................C-9

Chapter 1: Introduction

1-1

Model HDD I/O Slots Power

Supply

SC823TQ-653LPB 6x SATA 7x LP 650W

(Gold level cert.)

Chapter 1

Introduction

1-1 Overview

Supermicro’s SC823 2U chassis features a unique and highly-optimized design,

with advanced thermal airow to support dual processors. The chassis is equipped

with a high-efciency 650 Watt power supply.

1-2 Shipping List

Visit the Supermicro Web site for the latest shipping lists and part numbers for your

particular chassis model at http://www.supermicro.com

LP: Low-prole

Note: A complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

SC826 Chassis Manual

1-2

1-3 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.com

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Tel: +886-(2)-8226-3990

Web Site: www.supermicro.com.tw

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supero Server Handbücher

Supero

Supero AS2021M-T2R+ Bedienungsanleitung

Supero

Supero AS-4040C-8R Bedienungsanleitung

Supero

Supero SUPERSERVER 6015TC-LFT Bedienungsanleitung

Supero

Supero SUPERSERVER 5010E Bedienungsanleitung

Supero

Supero SUPERO SuperServer 6026TT-GTRF Bedienungsanleitung

Supero

Supero SuperServer E200-8B Bedienungsanleitung

Supero

Supero SUPERSERVER 5015M-UR Bedienungsanleitung

Supero

Supero SUPERSERVER 5017P-TLN4F Bedienungsanleitung

Supero

Supero SUPERO SuperServer 5037MC-H8TRF Bedienungsanleitung

Supero

Supero SUPERSERVER 6037R-TXRF Bedienungsanleitung

Supero

Supero 1022GG-TF Bedienungsanleitung

Supero

Supero 8047R-7JRFT Bedienungsanleitung

Supero

Supero SuperServer 5017R-MF Bedienungsanleitung

Supero

Supero SUPERSERVER 1027R-72RFTP Bedienungsanleitung

Supero

Supero SUPERSERVER 5015B-T Bedienungsanleitung

Supero

Supero SuperServer 5015M-Ni Bedienungsanleitung

Supero

Supero Supero SUPERSERVER 5015A-L Bedienungsanleitung

Supero

Supero SuperServer 7042P-8R Bedienungsanleitung

Supero

Supero SUPERSERVER 1028R-WMR Bedienungsanleitung

Supero

Supero SUPERO SUPERSERVER 5015B-MT Bedienungsanleitung

Supero

Supero SUPERSERVER 6017R-TDLF Bedienungsanleitung

Supero

Supero SC216A-R1200UB Bedienungsanleitung

Supero

Supero SUPERO SUPERSERVER 8026B-6RF Bedienungsanleitung

Supero

Supero SUPERSERVER 7046GT-TRF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung