Supero SuperServer 5013G-M Bedienungsanleitung

SUPER

SUPERSERVER 5013G-M

USER’S MANUAL

Revision 2.0

The information in this User’s Manual has been carefully reviewed and is believed to be

accurate. The vendor assumes no responsibility for any inaccuracies that may be contained

in this document, makes no commitment to update or to keep current the information in this

manual, or to notify any person or organization of the updates. Please Note: For the most

up-to-date version of this manual, please see our web site at www.supermicro.com.

SUPERMICRO COMPUTER reserves the right to make changes to the product described in

this manual at any time and without notice. This product, including software, if any, and

documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPE-

CIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT

HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH

THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of Santa

Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro’s total

liability for all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a

Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the manufacturer’s instruction manual,

may cause harmful interference with radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference, in which case you will be required to

correct the interference at your own expense.

Manual Revision 2.0

Release Date: May 10, 2007

Unless you request and receive written permission from SUPER MICRO COMPUTER, you

may not copy any part of this document.

Information in this document is subject to change without notice. Other products and

companies referred to herein are trademarks or registered trademarks of their respective

companies or mark holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC techni-

cians. It provides information for the installation and use of the Super-

Server 5013G-M. Installation and maintainance should be performed by

experienced technicians only.

The SuperServer 5013G-M is an ultra compact single processor 1U

rackmount server based on the SC512 1U rackmount server chassis and

the P4SGE mainboard. The P4SGE mainboard supports single Intel®

Pentium®4 processors with a 512KB integrated Advanced Transfer Cache

or single Intel®Celeron®processors with a 128KB integrated Advanced

Transfer Cache.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with

the server system and describes the main features of the Super P4SGE

mainboard and the SC512 chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer

5013G-M into a rack and check out the server configuration prior to power-

ing up the system. If your server was ordered without the processor and

memory components, this chapter will refer you to the appropriate sections

of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the

functions and information provided by the control panel on the chassis as

well as other LEDs located throughout the system.

iii

Preface

SUPERSERVER 5013G-M Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general

overview of safety precautions that should be followed when installing and

servicing the SuperServer 5013G-M.

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the P4SGE motherboard, includ-

ing the locations and functions of connectors, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and

when reconfiguring the motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC512 1U rackmount

server chassis. You should follow the procedures given in this chapter

when installing, removing or reconfiguring IDE and peripheral drives and

when replacing system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed

information on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: System Specifications

Preface

Notes

SUPERSERVER 5013G-M Manual

Table of Contents

Preface

About This Manual ...................................................................................................... iii

Manual Organization ................................................................................................... iii

Chapter 1: Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Server Chassis Features.............................................................................. 1-2

1-3 Mainboard Features ....................................................................................... 1-4

1-4 Contacting Supermicro .................................................................................. 1-6

Chapter 2: Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the SuperServer 5013G-M ........................................................ 2-1

2-3 Preparing for Setup ....................................................................................... 2-1

Choosing a Setup Location .................................................................... 2-2

Rack Precautions ..................................................................................... 2-2

Server Precautions.................................................................................. 2-2

Rack Mounting Considerations .............................................................. 2-3

2-4 Installing the SuperServer 5013G-M into a Rack ..................................... 2-4

Identifying the Sections of the Rack Rails .......................................... 2-4

Installing the Chassis Rails .................................................................... 2-5

Installing the Rack Rails ......................................................................... 2-5

Installing the Server into the Rack ....................................................... 2-6

Installing the Server into a Telco Rack ............................................... 2-7

2-5 Checking the Motherboard Setup ................................................................ 2-8

2-6 Checking the Drive Bay Setup ................................................................... 2-10

Chapter 3: System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons .................................................................................... 3-1

Reset .......................................................................................................... 3-1

Power ........................................................................................................ 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat ................................................................................................... 3-2

NIC2 ............................................................................................................ 3-2

NIC1 ............................................................................................................ 3-2

HDD ............................................................................................................ 3-2

Power ........................................................................................................ 3-3

3-4 Motherboard LEDs .......................................................................................... 3-3

Chapter 4: System Safety

4-1 Electrical Safety Precautions ....................................................................... 4-1

4-2 General Safety Precautions ......................................................................... 4-2

4-3 ESD Precautions ............................................................................................. 4-3

4-4 Operating Precautions ................................................................................... 4-4

Chapter 5: Advanced Motherboard Setup

5-1 Handling the P4SGE Motherboard ................................................................ 5-1

5-2 Motherboard Installation ................................................................................ 5-2

5-3 Connecting Cables ......................................................................................... 5-3

Connecting Data Cables ......................................................................... 5-3

Connecting Power Cables ...................................................................... 5-3

Connecting the Control Panel ................................................................ 5-3

5-4 I/O Ports ........................................................................................................... 5-4

5-5 Installing Processors ..................................................................................... 5-5

5-6 Installing Memory ............................................................................................ 5-7

5-7 Adding PCI Cards ........................................................................................... 5-8

P4SGE Layout .......................................................................................... 5-9

P4SGE Quick Reference ....................................................................... 5-10

5-8 Connector Definitions .................................................................................. 5-11

Power Supply Connectors ................................................................... 5-11

Power Button Connnector .................................................................... 5-11

Reset Connector .................................................................................... 5-12

Power Fail LED Connector ................................................................... 5-12

Overheat LED Connector ..................................................................... 5-12

NIC2 LED Connector .............................................................................. 5-12

NIC1 LED Connector .............................................................................. 5-13

HDD LED .................................................................................................. 5-13

Power_LED Connector .......................................................................... 5-13

NMI Connector ........................................................................................ 5-13

CD Header ............................................................................................... 5-14

Fan Headers ........................................................................................... 5-14

Chassis Intrusion ................................................................................... 5-14

Overheat LED (JOH1) ........................................................................... 5-14

ATX PS/2 Keyboard and Mouse Ports............................................... 5-15

Universal Serial Bus.............................................................................. 5-15

Wake-On-LAN ........................................................................................ 5-15

vii

Table of Contents

SUPERSERVER 5013G-M Manual

viii

Wake-On-Ring ........................................................................................ 5-16

Serial Ports ............................................................................................. 5-16

5-9 Jumper Settings ............................................................................................ 5-17

Explanation of Jumpers ........................................................................ 5-17

CMOS Clear............................................................................................. 5-17

Chassis/Overheat Fan Select .............................................................. 5-17

USB Wake-Up ......................................................................................... 5-18

Watch Dog Enable/Disable ................................................................... 5-18

Front Side Bus Speed .......................................................................... 5-18

Keyboard Wake-Up ................................................................................ 5-19

LAN1 Enable/Disable ............................................................................. 5-19

LAN2 Enable/Disable ............................................................................. 5-19

5-10 Parallel Port/Floppy Drive/Hard Drive/AGP Connections ....................... 5-20

Parallel Port ............................................................................................. 5-20

Floppy Connector ................................................................................... 5-21

IDE Connectors ...................................................................................... 5-21

4xAGP Slot.............................................................................................. 5-22

Chapter 6: Advanced Chassis Setup

6-1 Static-Sensitive Devices ............................................................................... 6-1

6-2 Control Panel ................................................................................................... 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure .................................................................................. 6-3

Replacing System Cooling Fan .............................................................. 6-3

6-4 Drive Bay Installation/Removal ..................................................................... 6-4

Accessing the Drive Bays ..................................................................... 6-4

IDE Drive Installation................................................................................ 6-4

CD-ROM and Floppy Drive Installation ................................................. 6-6

6-5 Power Supply ................................................................................................. 6-7

Power Supply Failure ............................................................................. 6-7

Replacing the Power Supply ................................................................. 6-7

Chapter 7: BIOS

7-1 Introduction ...................................................................................................... 7-1

7-2 Running Setup ................................................................................................. 7-2

7-3 Main BIOS Setup ............................................................................................. 7-2

The Main BIOS Setup Menu ................................................................... 7-3

7-4 Advanced BIOS Setup ................................................................................... 7-6

7-4.1 Advanced BIOS Features .......................................................... 7-6

7-4.2 Advanced Chipset Features ...................................................... 7-9

Table of Contents

7-4.3 Integrated Peripherals ............................................................... 7-13

7-4.4 Hardware Monitors .................................................................... 7-16

7-4.5 Processor Features .................................................................. 7-17

7-5 PCI/PnP Configurations ................................................................................ 7-18

7-6 Power ............................................................................................................. 7-20

7-7 Boot ................................................................................................................ 7-23

7-8 Security.......................................................................................................... 7-25

7-9 Exit .................................................................................................................. 7-26

Appendices:

Appendix A: BIOS POST Messages .................................................................... A-1

Appendix B: BIOS POST Codes ........................................................................... B-1

Appendix C: System Specifications .................................................................... C-1

SUPERSERVER 5013G-M User's Manual

Notes

Inhaltsverzeichnis

Andere Supero Server Handbücher

Supero

Supero SuperServer 6023M-8R Bedienungsanleitung

Supero

Supero SUPERSERVER 7045B-8R+ Bedienungsanleitung

Supero

Supero SUPERSERVER 6028TR-DTR Bedienungsanleitung

Supero

Supero SuperServer 6040 Bedienungsanleitung

Supero

Supero Supero SC512-200B Bedienungsanleitung

Supero

Supero SUPERSERVER 6015T-INF Bedienungsanleitung

Supero

Supero Supero 6017R-73THDP+ Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Supero

Supero Supero SUPERSERVER 6016T-T Bedienungsanleitung

Supero

Supero SUPERSERVER 1027GR-TRFT Bedienungsanleitung

Supero

Supero SuperServer 6027PR-HC1R Bedienungsanleitung

Supero

Supero SuperServer 6026TT-HDTRF Bedienungsanleitung

Supero

Supero SuperServer 5015M-Ni Bedienungsanleitung

Supero

Supero SuperServer 6024H-TR Bedienungsanleitung

Supero

Supero SUPERSERVER 2028TP-HC1R Bedienungsanleitung

Supero

Supero FatTwin F627R3-R72B+ Bedienungsanleitung

Supero

Supero SUPERSERVER 6027R-73DARF Bedienungsanleitung

Supero

Supero 1022GG-TF Bedienungsanleitung

Supero

Supero 7042M-6 Bedienungsanleitung

Supero

Supero SUPERSERVER 8046B-6RF Bedienungsanleitung

Supero

Supero FatTwin F617R2-F73 Bedienungsanleitung

Supero

Supero SC835TQ - R800B Bedienungsanleitung

Supero

Supero FatTwin F628R3-FT Bedienungsanleitung

Supero

Supero AS-4040C-8R Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung